linux/drivers/mtd/nand/gpmi-nand
Huang Shijie 92d0e09abe mtd: gpmi: add sanity check for the ECC
We do the check based on the following two facts:

[1] The mx23/mx28 can only support 20-bits ECC, while the mx6
    can supports 40-bits ECC.

[2] The mx23/mx28 can only support the GF13, while the mx6
    can supports GF13 and GF14.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04 10:28:02 +02:00
..
bch-regs.h mtd: gpmi: set the Golois Field bit for mx6q's BCH 2013-02-04 10:27:59 +02:00
gpmi-lib.c mtd: gpmi: set the Golois Field bit for mx6q's BCH 2013-02-04 10:27:59 +02:00
gpmi-nand.c mtd: gpmi: add sanity check for the ECC 2013-02-04 10:28:02 +02:00
gpmi-nand.h mtd: gpmi: add sanity check for the ECC 2013-02-04 10:28:02 +02:00
gpmi-regs.h mtd: gpmi: add a new field for HW_GPMI_CTRL1 2012-09-29 15:55:18 +01:00
Makefile mtd: add GPMI-NAND driver in the config and Makefile 2011-09-11 15:02:18 +03:00