linux/include/net/bond_options.h
Aahil Awatramani 240fd40552 bonding: Add independent control state machine
Add support for the independent control state machine per IEEE
802.1AX-2008 5.4.15 in addition to the existing implementation of the
coupled control state machine.

Introduces two new states, AD_MUX_COLLECTING and AD_MUX_DISTRIBUTING in
the LACP MUX state machine for separated handling of an initial
Collecting state before the Collecting and Distributing state. This
enables a port to be in a state where it can receive incoming packets
while not still distributing. This is useful for reducing packet loss when
a port begins distributing before its partner is able to collect.

Added new functions such as bond_set_slave_tx_disabled_flags and
bond_set_slave_rx_enabled_flags to precisely manage the port's collecting
and distributing states. Previously, there was no dedicated method to
disable TX while keeping RX enabled, which this patch addresses.

Note that the regular flow process in the kernel's bonding driver remains
unaffected by this patch. The extension requires explicit opt-in by the
user (in order to ensure no disruptions for existing setups) via netlink
support using the new bonding parameter coupled_control. The default value
for coupled_control is set to 1 so as to preserve existing behaviour.

Signed-off-by: Aahil Awatramani <aahila@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240202175858.1573852-1-aahila@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-06 13:17:54 +01:00

166 lines
4.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* drivers/net/bond/bond_options.h - bonding options
* Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
*/
#ifndef _NET_BOND_OPTIONS_H
#define _NET_BOND_OPTIONS_H
#include <linux/bits.h>
#include <linux/limits.h>
#include <linux/types.h>
#include <linux/string.h>
struct netlink_ext_ack;
struct nlattr;
#define BOND_OPT_MAX_NAMELEN 32
#define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
#define BOND_MODE_ALL_EX(x) (~(x))
/* Option flags:
* BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
* BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
* BOND_OPTFLAG_RAWVAL - the option parses the value itself
*/
enum {
BOND_OPTFLAG_NOSLAVES = BIT(0),
BOND_OPTFLAG_IFDOWN = BIT(1),
BOND_OPTFLAG_RAWVAL = BIT(2)
};
/* Value type flags:
* BOND_VALFLAG_DEFAULT - mark the value as default
* BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
*/
enum {
BOND_VALFLAG_DEFAULT = BIT(0),
BOND_VALFLAG_MIN = BIT(1),
BOND_VALFLAG_MAX = BIT(2)
};
/* Option IDs, their bit positions correspond to their IDs */
enum {
BOND_OPT_MODE,
BOND_OPT_PACKETS_PER_SLAVE,
BOND_OPT_XMIT_HASH,
BOND_OPT_ARP_VALIDATE,
BOND_OPT_ARP_ALL_TARGETS,
BOND_OPT_FAIL_OVER_MAC,
BOND_OPT_ARP_INTERVAL,
BOND_OPT_ARP_TARGETS,
BOND_OPT_DOWNDELAY,
BOND_OPT_UPDELAY,
BOND_OPT_LACP_RATE,
BOND_OPT_MINLINKS,
BOND_OPT_AD_SELECT,
BOND_OPT_NUM_PEER_NOTIF,
BOND_OPT_MIIMON,
BOND_OPT_PRIMARY,
BOND_OPT_PRIMARY_RESELECT,
BOND_OPT_USE_CARRIER,
BOND_OPT_ACTIVE_SLAVE,
BOND_OPT_QUEUE_ID,
BOND_OPT_ALL_SLAVES_ACTIVE,
BOND_OPT_RESEND_IGMP,
BOND_OPT_LP_INTERVAL,
BOND_OPT_SLAVES,
BOND_OPT_TLB_DYNAMIC_LB,
BOND_OPT_AD_ACTOR_SYS_PRIO,
BOND_OPT_AD_ACTOR_SYSTEM,
BOND_OPT_AD_USER_PORT_KEY,
BOND_OPT_NUM_PEER_NOTIF_ALIAS,
BOND_OPT_PEER_NOTIF_DELAY,
BOND_OPT_LACP_ACTIVE,
BOND_OPT_MISSED_MAX,
BOND_OPT_NS_TARGETS,
BOND_OPT_PRIO,
BOND_OPT_COUPLED_CONTROL,
BOND_OPT_LAST
};
/* This structure is used for storing option values and for passing option
* values when changing an option. The logic when used as an arg is as follows:
* - if value != ULLONG_MAX -> parse value
* - if string != NULL -> parse string
* - if the opt is RAW data and length less than maxlen,
* copy the data to extra storage
*/
#define BOND_OPT_EXTRA_MAXLEN 16
struct bond_opt_value {
char *string;
u64 value;
u32 flags;
union {
char extra[BOND_OPT_EXTRA_MAXLEN];
struct net_device *slave_dev;
};
};
struct bonding;
struct bond_option {
int id;
const char *name;
const char *desc;
u32 flags;
/* unsuppmodes is used to denote modes in which the option isn't
* supported.
*/
unsigned long unsuppmodes;
/* supported values which this option can have, can be a subset of
* BOND_OPTVAL_RANGE's value range
*/
const struct bond_opt_value *values;
int (*set)(struct bonding *bond, const struct bond_opt_value *val);
};
int __bond_opt_set(struct bonding *bond, unsigned int option,
struct bond_opt_value *val,
struct nlattr *bad_attr, struct netlink_ext_ack *extack);
int __bond_opt_set_notify(struct bonding *bond, unsigned int option,
struct bond_opt_value *val);
int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
struct bond_opt_value *val);
const struct bond_option *bond_opt_get(unsigned int option);
const struct bond_option *bond_opt_get_by_name(const char *name);
const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
/* This helper is used to initialize a bond_opt_value structure for parameter
* passing. There should be either a valid string or value, but not both.
* When value is ULLONG_MAX then string will be used.
*/
static inline void __bond_opt_init(struct bond_opt_value *optval,
char *string, u64 value,
void *extra, size_t extra_len)
{
memset(optval, 0, sizeof(*optval));
optval->value = ULLONG_MAX;
if (value != ULLONG_MAX)
optval->value = value;
else if (string)
optval->string = string;
if (extra && extra_len <= BOND_OPT_EXTRA_MAXLEN)
memcpy(optval->extra, extra, extra_len);
}
#define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value, NULL, 0)
#define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX, NULL, 0)
#define bond_opt_initextra(optval, extra, extra_len) \
__bond_opt_init(optval, NULL, ULLONG_MAX, extra, extra_len)
#define bond_opt_slave_initval(optval, slave_dev, value) \
__bond_opt_init(optval, NULL, value, slave_dev, sizeof(struct net_device *))
void bond_option_arp_ip_targets_clear(struct bonding *bond);
#if IS_ENABLED(CONFIG_IPV6)
void bond_option_ns_ip6_targets_clear(struct bonding *bond);
#endif
#endif /* _NET_BOND_OPTIONS_H */