linux/tools/testing/selftests/bpf/test_lirc_mode2_user.c
Sean Young 01d3240a04 media: bpf: add bpf function to report mouse movement
Some IR remotes have a directional pad or other pointer-like thing that
can be used as a mouse. Make it possible to decode these types of IR
protocols in BPF.

Cc: netdev@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-09 14:37:18 -08:00

177 lines
4.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
// test ir decoder
//
// Copyright (C) 2018 Sean Young <sean@mess.org>
// A lirc chardev is a device representing a consumer IR (cir) device which
// can receive infrared signals from remote control and/or transmit IR.
//
// IR is sent as a series of pulses and space somewhat like morse code. The
// BPF program can decode this into scancodes so that rc-core can translate
// this into input key codes using the rc keymap.
//
// This test works by sending IR over rc-loopback, so the IR is processed by
// BPF and then decoded into scancodes. The lirc chardev must be the one
// associated with rc-loopback, see the output of ir-keytable(1).
//
// The following CONFIG options must be enabled for the test to succeed:
// CONFIG_RC_CORE=y
// CONFIG_BPF_RAWIR_EVENT=y
// CONFIG_RC_LOOPBACK=y
// Steps:
// 1. Open the /dev/lircN device for rc-loopback (given on command line)
// 2. Attach bpf_lirc_mode2 program which decodes some IR.
// 3. Send some IR to the same IR device; since it is loopback, this will
// end up in the bpf program
// 4. bpf program should decode IR and report keycode
// 5. We can read keycode from same /dev/lirc device
#include <linux/bpf.h>
#include <linux/lirc.h>
#include <linux/input.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <poll.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <fcntl.h>
#include "bpf_util.h"
#include <bpf/bpf.h>
#include <bpf/libbpf.h>
int main(int argc, char **argv)
{
struct bpf_object *obj;
int ret, lircfd, progfd, inputfd;
int testir1 = 0x1dead;
int testir2 = 0x20101;
u32 prog_ids[10], prog_flags[10], prog_cnt;
if (argc != 3) {
printf("Usage: %s /dev/lircN /dev/input/eventM\n", argv[0]);
return 2;
}
ret = bpf_prog_load("test_lirc_mode2_kern.o",
BPF_PROG_TYPE_LIRC_MODE2, &obj, &progfd);
if (ret) {
printf("Failed to load bpf program\n");
return 1;
}
lircfd = open(argv[1], O_RDWR | O_NONBLOCK);
if (lircfd == -1) {
printf("failed to open lirc device %s: %m\n", argv[1]);
return 1;
}
/* Let's try detach it before it was ever attached */
ret = bpf_prog_detach2(progfd, lircfd, BPF_LIRC_MODE2);
if (ret != -1 || errno != ENOENT) {
printf("bpf_prog_detach2 not attached should fail: %m\n");
return 1;
}
inputfd = open(argv[2], O_RDONLY | O_NONBLOCK);
if (inputfd == -1) {
printf("failed to open input device %s: %m\n", argv[1]);
return 1;
}
prog_cnt = 10;
ret = bpf_prog_query(lircfd, BPF_LIRC_MODE2, 0, prog_flags, prog_ids,
&prog_cnt);
if (ret) {
printf("Failed to query bpf programs on lirc device: %m\n");
return 1;
}
if (prog_cnt != 0) {
printf("Expected nothing to be attached\n");
return 1;
}
ret = bpf_prog_attach(progfd, lircfd, BPF_LIRC_MODE2, 0);
if (ret) {
printf("Failed to attach bpf to lirc device: %m\n");
return 1;
}
/* Write raw IR */
ret = write(lircfd, &testir1, sizeof(testir1));
if (ret != sizeof(testir1)) {
printf("Failed to send test IR message: %m\n");
return 1;
}
struct pollfd pfd = { .fd = inputfd, .events = POLLIN };
struct input_event event;
for (;;) {
poll(&pfd, 1, 100);
/* Read decoded IR */
ret = read(inputfd, &event, sizeof(event));
if (ret != sizeof(event)) {
printf("Failed to read decoded IR: %m\n");
return 1;
}
if (event.type == EV_MSC && event.code == MSC_SCAN &&
event.value == 0xdead) {
break;
}
}
/* Write raw IR */
ret = write(lircfd, &testir2, sizeof(testir2));
if (ret != sizeof(testir2)) {
printf("Failed to send test IR message: %m\n");
return 1;
}
for (;;) {
poll(&pfd, 1, 100);
/* Read decoded IR */
ret = read(inputfd, &event, sizeof(event));
if (ret != sizeof(event)) {
printf("Failed to read decoded IR: %m\n");
return 1;
}
if (event.type == EV_REL && event.code == REL_Y &&
event.value == 1 ) {
break;
}
}
prog_cnt = 10;
ret = bpf_prog_query(lircfd, BPF_LIRC_MODE2, 0, prog_flags, prog_ids,
&prog_cnt);
if (ret) {
printf("Failed to query bpf programs on lirc device: %m\n");
return 1;
}
if (prog_cnt != 1) {
printf("Expected one program to be attached\n");
return 1;
}
/* Let's try detaching it now it is actually attached */
ret = bpf_prog_detach2(progfd, lircfd, BPF_LIRC_MODE2);
if (ret) {
printf("bpf_prog_detach2: returned %m\n");
return 1;
}
return 0;
}