linux/arch/powerpc/platforms/powermac/time.c
Joe Perches 28f65c11f2 treewide: Convert uses of struct resource to resource_size(ptr)
Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-10 14:55:36 +02:00

336 lines
8.1 KiB
C

/*
* Support for periodic interrupts (100 per second) and for getting
* the current time from the RTC on Power Macintoshes.
*
* We use the decrementer register for our periodic interrupts.
*
* Paul Mackerras August 1996.
* Copyright (C) 1996 Paul Mackerras.
* Copyright (C) 2003-2005 Benjamin Herrenschmidt.
*
*/
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
#include <linux/interrupt.h>
#include <linux/hardirq.h>
#include <linux/rtc.h>
#include <asm/sections.h>
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/machdep.h>
#include <asm/time.h>
#include <asm/nvram.h>
#include <asm/smu.h>
#undef DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
/* Apparently the RTC stores seconds since 1 Jan 1904 */
#define RTC_OFFSET 2082844800
/*
* Calibrate the decrementer frequency with the VIA timer 1.
*/
#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */
/* VIA registers */
#define RS 0x200 /* skip between registers */
#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
#define ACR (11*RS) /* Auxiliary control register */
#define IFR (13*RS) /* Interrupt flag register */
/* Bits in ACR */
#define T1MODE 0xc0 /* Timer 1 mode */
#define T1MODE_CONT 0x40 /* continuous interrupts */
/* Bits in IFR and IER */
#define T1_INT 0x40 /* Timer 1 interrupt */
long __init pmac_time_init(void)
{
s32 delta = 0;
#ifdef CONFIG_NVRAM
int dst;
delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
if (delta & 0x00800000UL)
delta |= 0xFF000000UL;
dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
dst ? "on" : "off");
#endif
return delta;
}
#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
static void to_rtc_time(unsigned long now, struct rtc_time *tm)
{
to_tm(now, tm);
tm->tm_year -= 1900;
tm->tm_mon -= 1;
}
#endif
#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) || \
defined(CONFIG_PMAC_SMU)
static unsigned long from_rtc_time(struct rtc_time *tm)
{
return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
}
#endif
#ifdef CONFIG_ADB_CUDA
static unsigned long cuda_get_time(void)
{
struct adb_request req;
unsigned int now;
if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
return 0;
while (!req.complete)
cuda_poll();
if (req.reply_len != 7)
printk(KERN_ERR "cuda_get_time: got %d byte reply\n",
req.reply_len);
now = (req.reply[3] << 24) + (req.reply[4] << 16)
+ (req.reply[5] << 8) + req.reply[6];
return ((unsigned long)now) - RTC_OFFSET;
}
#define cuda_get_rtc_time(tm) to_rtc_time(cuda_get_time(), (tm))
static int cuda_set_rtc_time(struct rtc_time *tm)
{
unsigned int nowtime;
struct adb_request req;
nowtime = from_rtc_time(tm) + RTC_OFFSET;
if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
nowtime >> 24, nowtime >> 16, nowtime >> 8,
nowtime) < 0)
return -ENXIO;
while (!req.complete)
cuda_poll();
if ((req.reply_len != 3) && (req.reply_len != 7))
printk(KERN_ERR "cuda_set_rtc_time: got %d byte reply\n",
req.reply_len);
return 0;
}
#else
#define cuda_get_time() 0
#define cuda_get_rtc_time(tm)
#define cuda_set_rtc_time(tm) 0
#endif
#ifdef CONFIG_ADB_PMU
static unsigned long pmu_get_time(void)
{
struct adb_request req;
unsigned int now;
if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
return 0;
pmu_wait_complete(&req);
if (req.reply_len != 4)
printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n",
req.reply_len);
now = (req.reply[0] << 24) + (req.reply[1] << 16)
+ (req.reply[2] << 8) + req.reply[3];
return ((unsigned long)now) - RTC_OFFSET;
}
#define pmu_get_rtc_time(tm) to_rtc_time(pmu_get_time(), (tm))
static int pmu_set_rtc_time(struct rtc_time *tm)
{
unsigned int nowtime;
struct adb_request req;
nowtime = from_rtc_time(tm) + RTC_OFFSET;
if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24,
nowtime >> 16, nowtime >> 8, nowtime) < 0)
return -ENXIO;
pmu_wait_complete(&req);
if (req.reply_len != 0)
printk(KERN_ERR "pmu_set_rtc_time: %d byte reply from PMU\n",
req.reply_len);
return 0;
}
#else
#define pmu_get_time() 0
#define pmu_get_rtc_time(tm)
#define pmu_set_rtc_time(tm) 0
#endif
#ifdef CONFIG_PMAC_SMU
static unsigned long smu_get_time(void)
{
struct rtc_time tm;
if (smu_get_rtc_time(&tm, 1))
return 0;
return from_rtc_time(&tm);
}
#else
#define smu_get_time() 0
#define smu_get_rtc_time(tm, spin)
#define smu_set_rtc_time(tm, spin) 0
#endif
/* Can't be __init, it's called when suspending and resuming */
unsigned long pmac_get_boot_time(void)
{
/* Get the time from the RTC, used only at boot time */
switch (sys_ctrler) {
case SYS_CTRLER_CUDA:
return cuda_get_time();
case SYS_CTRLER_PMU:
return pmu_get_time();
case SYS_CTRLER_SMU:
return smu_get_time();
default:
return 0;
}
}
void pmac_get_rtc_time(struct rtc_time *tm)
{
/* Get the time from the RTC, used only at boot time */
switch (sys_ctrler) {
case SYS_CTRLER_CUDA:
cuda_get_rtc_time(tm);
break;
case SYS_CTRLER_PMU:
pmu_get_rtc_time(tm);
break;
case SYS_CTRLER_SMU:
smu_get_rtc_time(tm, 1);
break;
default:
;
}
}
int pmac_set_rtc_time(struct rtc_time *tm)
{
switch (sys_ctrler) {
case SYS_CTRLER_CUDA:
return cuda_set_rtc_time(tm);
case SYS_CTRLER_PMU:
return pmu_set_rtc_time(tm);
case SYS_CTRLER_SMU:
return smu_set_rtc_time(tm, 1);
default:
return -ENODEV;
}
}
#ifdef CONFIG_PPC32
/*
* Calibrate the decrementer register using VIA timer 1.
* This is used both on powermacs and CHRP machines.
*/
int __init via_calibrate_decr(void)
{
struct device_node *vias;
volatile unsigned char __iomem *via;
int count = VIA_TIMER_FREQ_6 / 100;
unsigned int dstart, dend;
struct resource rsrc;
vias = of_find_node_by_name(NULL, "via-cuda");
if (vias == NULL)
vias = of_find_node_by_name(NULL, "via-pmu");
if (vias == NULL)
vias = of_find_node_by_name(NULL, "via");
if (vias == NULL || of_address_to_resource(vias, 0, &rsrc)) {
of_node_put(vias);
return 0;
}
of_node_put(vias);
via = ioremap(rsrc.start, resource_size(&rsrc));
if (via == NULL) {
printk(KERN_ERR "Failed to map VIA for timer calibration !\n");
return 0;
}
/* set timer 1 for continuous interrupts */
out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
/* set the counter to a small value */
out_8(&via[T1CH], 2);
/* set the latch to `count' */
out_8(&via[T1LL], count);
out_8(&via[T1LH], count >> 8);
/* wait until it hits 0 */
while ((in_8(&via[IFR]) & T1_INT) == 0)
;
dstart = get_dec();
/* clear the interrupt & wait until it hits 0 again */
in_8(&via[T1CL]);
while ((in_8(&via[IFR]) & T1_INT) == 0)
;
dend = get_dec();
ppc_tb_freq = (dstart - dend) * 100 / 6;
iounmap(via);
return 1;
}
#endif
/*
* Query the OF and get the decr frequency.
*/
void __init pmac_calibrate_decr(void)
{
generic_calibrate_decr();
#ifdef CONFIG_PPC32
/* We assume MacRISC2 machines have correct device-tree
* calibration. That's better since the VIA itself seems
* to be slightly off. --BenH
*/
if (!of_machine_is_compatible("MacRISC2") &&
!of_machine_is_compatible("MacRISC3") &&
!of_machine_is_compatible("MacRISC4"))
if (via_calibrate_decr())
return;
/* Special case: QuickSilver G4s seem to have a badly calibrated
* timebase-frequency in OF, VIA is much better on these. We should
* probably implement calibration based on the KL timer on these
* machines anyway... -BenH
*/
if (of_machine_is_compatible("PowerMac3,5"))
if (via_calibrate_decr())
return;
#endif
}