linux/arch/sparc/include/asm/pcic.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

131 lines
5.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* pcic.h: JavaEngine 1 specific PCI definitions.
*
* Copyright (C) 1998 V. Roganov and G. Raiko
*/
#ifndef __SPARC_PCIC_H
#define __SPARC_PCIC_H
#ifndef __ASSEMBLY__
#include <linux/types.h>
#include <linux/smp.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <asm/pbm.h>
struct linux_pcic {
void __iomem *pcic_regs;
unsigned long pcic_io;
void __iomem *pcic_config_space_addr;
void __iomem *pcic_config_space_data;
struct resource pcic_res_regs;
struct resource pcic_res_io;
struct resource pcic_res_cfg_addr;
struct resource pcic_res_cfg_data;
struct linux_pbm_info pbm;
struct pcic_ca2irq *pcic_imap;
int pcic_imdim;
};
#ifdef CONFIG_PCIC_PCI
int pcic_present(void);
int pcic_probe(void);
void pci_time_init(void);
void sun4m_pci_init_IRQ(void);
#else
static inline int pcic_present(void) { return 0; }
static inline int pcic_probe(void) { return 0; }
static inline void pci_time_init(void) {}
static inline void sun4m_pci_init_IRQ(void) {}
#endif
#endif
/* Size of PCI I/O space which we relocate. */
#define PCI_SPACE_SIZE 0x1000000 /* 16 MB */
/* PCIC Register Set. */
#define PCI_DIAGNOSTIC_0 0x40 /* 32 bits */
#define PCI_SIZE_0 0x44 /* 32 bits */
#define PCI_SIZE_1 0x48 /* 32 bits */
#define PCI_SIZE_2 0x4c /* 32 bits */
#define PCI_SIZE_3 0x50 /* 32 bits */
#define PCI_SIZE_4 0x54 /* 32 bits */
#define PCI_SIZE_5 0x58 /* 32 bits */
#define PCI_PIO_CONTROL 0x60 /* 8 bits */
#define PCI_DVMA_CONTROL 0x62 /* 8 bits */
#define PCI_DVMA_CONTROL_INACTIVITY_REQ (1<<0)
#define PCI_DVMA_CONTROL_IOTLB_ENABLE (1<<0)
#define PCI_DVMA_CONTROL_IOTLB_DISABLE 0
#define PCI_DVMA_CONTROL_INACTIVITY_ACK (1<<4)
#define PCI_INTERRUPT_CONTROL 0x63 /* 8 bits */
#define PCI_CPU_INTERRUPT_PENDING 0x64 /* 32 bits */
#define PCI_DIAGNOSTIC_1 0x68 /* 16 bits */
#define PCI_SOFTWARE_INT_CLEAR 0x6a /* 16 bits */
#define PCI_SOFTWARE_INT_SET 0x6e /* 16 bits */
#define PCI_SYS_INT_PENDING 0x70 /* 32 bits */
#define PCI_SYS_INT_PENDING_PIO 0x40000000
#define PCI_SYS_INT_PENDING_DMA 0x20000000
#define PCI_SYS_INT_PENDING_PCI 0x10000000
#define PCI_SYS_INT_PENDING_APSR 0x08000000
#define PCI_SYS_INT_TARGET_MASK 0x74 /* 32 bits */
#define PCI_SYS_INT_TARGET_MASK_CLEAR 0x78 /* 32 bits */
#define PCI_SYS_INT_TARGET_MASK_SET 0x7c /* 32 bits */
#define PCI_SYS_INT_PENDING_CLEAR 0x83 /* 8 bits */
#define PCI_SYS_INT_PENDING_CLEAR_ALL 0x80
#define PCI_SYS_INT_PENDING_CLEAR_PIO 0x40
#define PCI_SYS_INT_PENDING_CLEAR_DMA 0x20
#define PCI_SYS_INT_PENDING_CLEAR_PCI 0x10
#define PCI_IOTLB_CONTROL 0x84 /* 8 bits */
#define PCI_INT_SELECT_LO 0x88 /* 16 bits */
#define PCI_ARBITRATION_SELECT 0x8a /* 16 bits */
#define PCI_INT_SELECT_HI 0x8c /* 16 bits */
#define PCI_HW_INT_OUTPUT 0x8e /* 16 bits */
#define PCI_IOTLB_RAM_INPUT 0x90 /* 32 bits */
#define PCI_IOTLB_CAM_INPUT 0x94 /* 32 bits */
#define PCI_IOTLB_RAM_OUTPUT 0x98 /* 32 bits */
#define PCI_IOTLB_CAM_OUTPUT 0x9c /* 32 bits */
#define PCI_SMBAR0 0xa0 /* 8 bits */
#define PCI_MSIZE0 0xa1 /* 8 bits */
#define PCI_PMBAR0 0xa2 /* 8 bits */
#define PCI_SMBAR1 0xa4 /* 8 bits */
#define PCI_MSIZE1 0xa5 /* 8 bits */
#define PCI_PMBAR1 0xa6 /* 8 bits */
#define PCI_SIBAR 0xa8 /* 8 bits */
#define PCI_SIBAR_ADDRESS_MASK 0xf
#define PCI_ISIZE 0xa9 /* 8 bits */
#define PCI_ISIZE_16M 0xf
#define PCI_ISIZE_32M 0xe
#define PCI_ISIZE_64M 0xc
#define PCI_ISIZE_128M 0x8
#define PCI_ISIZE_256M 0x0
#define PCI_PIBAR 0xaa /* 8 bits */
#define PCI_CPU_COUNTER_LIMIT_HI 0xac /* 32 bits */
#define PCI_CPU_COUNTER_LIMIT_LO 0xb0 /* 32 bits */
#define PCI_CPU_COUNTER_LIMIT 0xb4 /* 32 bits */
#define PCI_SYS_LIMIT 0xb8 /* 32 bits */
#define PCI_SYS_COUNTER 0xbc /* 32 bits */
#define PCI_SYS_COUNTER_OVERFLOW (1<<31) /* Limit reached */
#define PCI_SYS_LIMIT_PSEUDO 0xc0 /* 32 bits */
#define PCI_USER_TIMER_CONTROL 0xc4 /* 8 bits */
#define PCI_USER_TIMER_CONFIG 0xc5 /* 8 bits */
#define PCI_COUNTER_IRQ 0xc6 /* 8 bits */
#define PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq) ((((sys_irq) & 0xf) << 4) | \
((cpu_irq) & 0xf))
#define PCI_COUNTER_IRQ_SYS(v) (((v) >> 4) & 0xf)
#define PCI_COUNTER_IRQ_CPU(v) ((v) & 0xf)
#define PCI_PIO_ERROR_COMMAND 0xc7 /* 8 bits */
#define PCI_PIO_ERROR_ADDRESS 0xc8 /* 32 bits */
#define PCI_IOTLB_ERROR_ADDRESS 0xcc /* 32 bits */
#define PCI_SYS_STATUS 0xd0 /* 8 bits */
#define PCI_SYS_STATUS_RESET_ENABLE (1<<0)
#define PCI_SYS_STATUS_RESET (1<<1)
#define PCI_SYS_STATUS_WATCHDOG_RESET (1<<4)
#define PCI_SYS_STATUS_PCI_RESET (1<<5)
#define PCI_SYS_STATUS_PCI_RESET_ENABLE (1<<6)
#define PCI_SYS_STATUS_PCI_SATTELITE_MODE (1<<7)
#endif /* !(__SPARC_PCIC_H) */