linux/arch/arm/mach-footbridge/dc21285-timer.c
afzal mohammed 5926e7e166 ARM: 8965/2: footbridge: replace setup_irq() by request_irq()
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-03-19 09:27:40 +00:00

137 lines
3.2 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/arm/mach-footbridge/dc21285-timer.c
*
* Copyright (C) 1998 Russell King.
* Copyright (C) 1998 Phil Blundell
*/
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/sched_clock.h>
#include <asm/irq.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach/time.h>
#include <asm/system_info.h>
#include "common.h"
static u64 cksrc_dc21285_read(struct clocksource *cs)
{
return cs->mask - *CSR_TIMER2_VALUE;
}
static int cksrc_dc21285_enable(struct clocksource *cs)
{
*CSR_TIMER2_LOAD = cs->mask;
*CSR_TIMER2_CLR = 0;
*CSR_TIMER2_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
return 0;
}
static void cksrc_dc21285_disable(struct clocksource *cs)
{
*CSR_TIMER2_CNTL = 0;
}
static struct clocksource cksrc_dc21285 = {
.name = "dc21285_timer2",
.rating = 200,
.read = cksrc_dc21285_read,
.enable = cksrc_dc21285_enable,
.disable = cksrc_dc21285_disable,
.mask = CLOCKSOURCE_MASK(24),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int ckevt_dc21285_set_next_event(unsigned long delta,
struct clock_event_device *c)
{
*CSR_TIMER1_CLR = 0;
*CSR_TIMER1_LOAD = delta;
*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
return 0;
}
static int ckevt_dc21285_shutdown(struct clock_event_device *c)
{
*CSR_TIMER1_CNTL = 0;
return 0;
}
static int ckevt_dc21285_set_periodic(struct clock_event_device *c)
{
*CSR_TIMER1_CLR = 0;
*CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
TIMER_CNTL_DIV16;
return 0;
}
static struct clock_event_device ckevt_dc21285 = {
.name = "dc21285_timer1",
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
.irq = IRQ_TIMER1,
.set_next_event = ckevt_dc21285_set_next_event,
.set_state_shutdown = ckevt_dc21285_shutdown,
.set_state_periodic = ckevt_dc21285_set_periodic,
.set_state_oneshot = ckevt_dc21285_shutdown,
.tick_resume = ckevt_dc21285_set_periodic,
};
static irqreturn_t timer1_interrupt(int irq, void *dev_id)
{
struct clock_event_device *ce = dev_id;
*CSR_TIMER1_CLR = 0;
/* Stop the timer if in one-shot mode */
if (clockevent_state_oneshot(ce))
*CSR_TIMER1_CNTL = 0;
ce->event_handler(ce);
return IRQ_HANDLED;
}
/*
* Set up timer interrupt.
*/
void __init footbridge_timer_init(void)
{
struct clock_event_device *ce = &ckevt_dc21285;
unsigned rate = DIV_ROUND_CLOSEST(mem_fclk_21285, 16);
clocksource_register_hz(&cksrc_dc21285, rate);
if (request_irq(ce->irq, timer1_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
"dc21285_timer1", &ckevt_dc21285))
pr_err("Failed to request irq %d (dc21285_timer1)", ce->irq);
ce->cpumask = cpumask_of(smp_processor_id());
clockevents_config_and_register(ce, rate, 0x4, 0xffffff);
}
static u64 notrace footbridge_read_sched_clock(void)
{
return ~*CSR_TIMER3_VALUE;
}
void __init footbridge_sched_clock(void)
{
unsigned rate = DIV_ROUND_CLOSEST(mem_fclk_21285, 16);
*CSR_TIMER3_LOAD = 0;
*CSR_TIMER3_CLR = 0;
*CSR_TIMER3_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
sched_clock_register(footbridge_read_sched_clock, 24, rate);
}