mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
753f15833c
The change removes redundant sysfs binary file boundary checks while reading or writing "param_eeprom" or "user_eeprom", the checks are not needed, since this task is done on caller side in fs/sysfs/file.c Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
838 lines
21 KiB
C
838 lines
21 KiB
C
/*
|
|
* 1-wire client/driver for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC
|
|
*
|
|
* Copyright (C) 2010 Indesign, LLC
|
|
*
|
|
* Author: Clifton Barnes <cabarnes@indesign-llc.com>
|
|
*
|
|
* Based on ds2760_battery and ds2782_battery drivers
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/param.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/idr.h>
|
|
|
|
#include "../w1/w1.h"
|
|
#include "../w1/slaves/w1_ds2780.h"
|
|
|
|
/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
|
|
#define DS2780_CURRENT_UNITS 1563
|
|
/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */
|
|
#define DS2780_CHARGE_UNITS 6250
|
|
/* Number of bytes in user EEPROM space */
|
|
#define DS2780_USER_EEPROM_SIZE (DS2780_EEPROM_BLOCK0_END - \
|
|
DS2780_EEPROM_BLOCK0_START + 1)
|
|
/* Number of bytes in parameter EEPROM space */
|
|
#define DS2780_PARAM_EEPROM_SIZE (DS2780_EEPROM_BLOCK1_END - \
|
|
DS2780_EEPROM_BLOCK1_START + 1)
|
|
|
|
struct ds2780_device_info {
|
|
struct device *dev;
|
|
struct power_supply *bat;
|
|
struct power_supply_desc bat_desc;
|
|
struct device *w1_dev;
|
|
};
|
|
|
|
enum current_types {
|
|
CURRENT_NOW,
|
|
CURRENT_AVG,
|
|
};
|
|
|
|
static const char model[] = "DS2780";
|
|
static const char manufacturer[] = "Maxim/Dallas";
|
|
|
|
static inline struct ds2780_device_info *
|
|
to_ds2780_device_info(struct power_supply *psy)
|
|
{
|
|
return power_supply_get_drvdata(psy);
|
|
}
|
|
|
|
static inline struct power_supply *to_power_supply(struct device *dev)
|
|
{
|
|
return dev_get_drvdata(dev);
|
|
}
|
|
|
|
static inline int ds2780_battery_io(struct ds2780_device_info *dev_info,
|
|
char *buf, int addr, size_t count, int io)
|
|
{
|
|
return w1_ds2780_io(dev_info->w1_dev, buf, addr, count, io);
|
|
}
|
|
|
|
static inline int ds2780_read8(struct ds2780_device_info *dev_info, u8 *val,
|
|
int addr)
|
|
{
|
|
return ds2780_battery_io(dev_info, val, addr, sizeof(u8), 0);
|
|
}
|
|
|
|
static int ds2780_read16(struct ds2780_device_info *dev_info, s16 *val,
|
|
int addr)
|
|
{
|
|
int ret;
|
|
u8 raw[2];
|
|
|
|
ret = ds2780_battery_io(dev_info, raw, addr, sizeof(raw), 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = (raw[0] << 8) | raw[1];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int ds2780_read_block(struct ds2780_device_info *dev_info,
|
|
u8 *val, int addr, size_t count)
|
|
{
|
|
return ds2780_battery_io(dev_info, val, addr, count, 0);
|
|
}
|
|
|
|
static inline int ds2780_write(struct ds2780_device_info *dev_info, u8 *val,
|
|
int addr, size_t count)
|
|
{
|
|
return ds2780_battery_io(dev_info, val, addr, count, 1);
|
|
}
|
|
|
|
static inline int ds2780_store_eeprom(struct device *dev, int addr)
|
|
{
|
|
return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_COPY_DATA);
|
|
}
|
|
|
|
static inline int ds2780_recall_eeprom(struct device *dev, int addr)
|
|
{
|
|
return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_RECALL_DATA);
|
|
}
|
|
|
|
static int ds2780_save_eeprom(struct ds2780_device_info *dev_info, int reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = ds2780_store_eeprom(dev_info->w1_dev, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ds2780_recall_eeprom(dev_info->w1_dev, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set sense resistor value in mhos */
|
|
static int ds2780_set_sense_register(struct ds2780_device_info *dev_info,
|
|
u8 conductance)
|
|
{
|
|
int ret;
|
|
|
|
ret = ds2780_write(dev_info, &conductance,
|
|
DS2780_RSNSP_REG, sizeof(u8));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ds2780_save_eeprom(dev_info, DS2780_RSNSP_REG);
|
|
}
|
|
|
|
/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */
|
|
static int ds2780_get_rsgain_register(struct ds2780_device_info *dev_info,
|
|
u16 *rsgain)
|
|
{
|
|
return ds2780_read16(dev_info, rsgain, DS2780_RSGAIN_MSB_REG);
|
|
}
|
|
|
|
/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
|
|
static int ds2780_set_rsgain_register(struct ds2780_device_info *dev_info,
|
|
u16 rsgain)
|
|
{
|
|
int ret;
|
|
u8 raw[] = {rsgain >> 8, rsgain & 0xFF};
|
|
|
|
ret = ds2780_write(dev_info, raw,
|
|
DS2780_RSGAIN_MSB_REG, sizeof(raw));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ds2780_save_eeprom(dev_info, DS2780_RSGAIN_MSB_REG);
|
|
}
|
|
|
|
static int ds2780_get_voltage(struct ds2780_device_info *dev_info,
|
|
int *voltage_uV)
|
|
{
|
|
int ret;
|
|
s16 voltage_raw;
|
|
|
|
/*
|
|
* The voltage value is located in 10 bits across the voltage MSB
|
|
* and LSB registers in two's compliment form
|
|
* Sign bit of the voltage value is in bit 7 of the voltage MSB register
|
|
* Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
|
|
* voltage MSB register
|
|
* Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
|
|
* voltage LSB register
|
|
*/
|
|
ret = ds2780_read16(dev_info, &voltage_raw,
|
|
DS2780_VOLT_MSB_REG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* DS2780 reports voltage in units of 4.88mV, but the battery class
|
|
* reports in units of uV, so convert by multiplying by 4880.
|
|
*/
|
|
*voltage_uV = (voltage_raw / 32) * 4880;
|
|
return 0;
|
|
}
|
|
|
|
static int ds2780_get_temperature(struct ds2780_device_info *dev_info,
|
|
int *temperature)
|
|
{
|
|
int ret;
|
|
s16 temperature_raw;
|
|
|
|
/*
|
|
* The temperature value is located in 10 bits across the temperature
|
|
* MSB and LSB registers in two's compliment form
|
|
* Sign bit of the temperature value is in bit 7 of the temperature
|
|
* MSB register
|
|
* Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
|
|
* temperature MSB register
|
|
* Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
|
|
* temperature LSB register
|
|
*/
|
|
ret = ds2780_read16(dev_info, &temperature_raw,
|
|
DS2780_TEMP_MSB_REG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Temperature is measured in units of 0.125 degrees celcius, the
|
|
* power_supply class measures temperature in tenths of degrees
|
|
* celsius. The temperature value is stored as a 10 bit number, plus
|
|
* sign in the upper bits of a 16 bit register.
|
|
*/
|
|
*temperature = ((temperature_raw / 32) * 125) / 100;
|
|
return 0;
|
|
}
|
|
|
|
static int ds2780_get_current(struct ds2780_device_info *dev_info,
|
|
enum current_types type, int *current_uA)
|
|
{
|
|
int ret, sense_res;
|
|
s16 current_raw;
|
|
u8 sense_res_raw, reg_msb;
|
|
|
|
/*
|
|
* The units of measurement for current are dependent on the value of
|
|
* the sense resistor.
|
|
*/
|
|
ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (sense_res_raw == 0) {
|
|
dev_err(dev_info->dev, "sense resistor value is 0\n");
|
|
return -EINVAL;
|
|
}
|
|
sense_res = 1000 / sense_res_raw;
|
|
|
|
if (type == CURRENT_NOW)
|
|
reg_msb = DS2780_CURRENT_MSB_REG;
|
|
else if (type == CURRENT_AVG)
|
|
reg_msb = DS2780_IAVG_MSB_REG;
|
|
else
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* The current value is located in 16 bits across the current MSB
|
|
* and LSB registers in two's compliment form
|
|
* Sign bit of the current value is in bit 7 of the current MSB register
|
|
* Bits 14 - 8 of the current value are in bits 6 - 0 of the current
|
|
* MSB register
|
|
* Bits 7 - 0 of the current value are in bits 7 - 0 of the current
|
|
* LSB register
|
|
*/
|
|
ret = ds2780_read16(dev_info, ¤t_raw, reg_msb);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*current_uA = current_raw * (DS2780_CURRENT_UNITS / sense_res);
|
|
return 0;
|
|
}
|
|
|
|
static int ds2780_get_accumulated_current(struct ds2780_device_info *dev_info,
|
|
int *accumulated_current)
|
|
{
|
|
int ret, sense_res;
|
|
s16 current_raw;
|
|
u8 sense_res_raw;
|
|
|
|
/*
|
|
* The units of measurement for accumulated current are dependent on
|
|
* the value of the sense resistor.
|
|
*/
|
|
ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (sense_res_raw == 0) {
|
|
dev_err(dev_info->dev, "sense resistor value is 0\n");
|
|
return -ENXIO;
|
|
}
|
|
sense_res = 1000 / sense_res_raw;
|
|
|
|
/*
|
|
* The ACR value is located in 16 bits across the ACR MSB and
|
|
* LSB registers
|
|
* Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR
|
|
* MSB register
|
|
* Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
|
|
* LSB register
|
|
*/
|
|
ret = ds2780_read16(dev_info, ¤t_raw, DS2780_ACR_MSB_REG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*accumulated_current = current_raw * (DS2780_CHARGE_UNITS / sense_res);
|
|
return 0;
|
|
}
|
|
|
|
static int ds2780_get_capacity(struct ds2780_device_info *dev_info,
|
|
int *capacity)
|
|
{
|
|
int ret;
|
|
u8 raw;
|
|
|
|
ret = ds2780_read8(dev_info, &raw, DS2780_RARC_REG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*capacity = raw;
|
|
return raw;
|
|
}
|
|
|
|
static int ds2780_get_status(struct ds2780_device_info *dev_info, int *status)
|
|
{
|
|
int ret, current_uA, capacity;
|
|
|
|
ret = ds2780_get_current(dev_info, CURRENT_NOW, ¤t_uA);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ds2780_get_capacity(dev_info, &capacity);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (capacity == 100)
|
|
*status = POWER_SUPPLY_STATUS_FULL;
|
|
else if (current_uA == 0)
|
|
*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
else if (current_uA < 0)
|
|
*status = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
else
|
|
*status = POWER_SUPPLY_STATUS_CHARGING;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds2780_get_charge_now(struct ds2780_device_info *dev_info,
|
|
int *charge_now)
|
|
{
|
|
int ret;
|
|
u16 charge_raw;
|
|
|
|
/*
|
|
* The RAAC value is located in 16 bits across the RAAC MSB and
|
|
* LSB registers
|
|
* Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC
|
|
* MSB register
|
|
* Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
|
|
* LSB register
|
|
*/
|
|
ret = ds2780_read16(dev_info, &charge_raw, DS2780_RAAC_MSB_REG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*charge_now = charge_raw * 1600;
|
|
return 0;
|
|
}
|
|
|
|
static int ds2780_get_control_register(struct ds2780_device_info *dev_info,
|
|
u8 *control_reg)
|
|
{
|
|
return ds2780_read8(dev_info, control_reg, DS2780_CONTROL_REG);
|
|
}
|
|
|
|
static int ds2780_set_control_register(struct ds2780_device_info *dev_info,
|
|
u8 control_reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = ds2780_write(dev_info, &control_reg,
|
|
DS2780_CONTROL_REG, sizeof(u8));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ds2780_save_eeprom(dev_info, DS2780_CONTROL_REG);
|
|
}
|
|
|
|
static int ds2780_battery_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
int ret = 0;
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
ret = ds2780_get_voltage(dev_info, &val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_TEMP:
|
|
ret = ds2780_get_temperature(dev_info, &val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_MODEL_NAME:
|
|
val->strval = model;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_MANUFACTURER:
|
|
val->strval = manufacturer;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
|
ret = ds2780_get_current(dev_info, CURRENT_NOW, &val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CURRENT_AVG:
|
|
ret = ds2780_get_current(dev_info, CURRENT_AVG, &val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
ret = ds2780_get_status(dev_info, &val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
ret = ds2780_get_capacity(dev_info, &val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CHARGE_COUNTER:
|
|
ret = ds2780_get_accumulated_current(dev_info, &val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CHARGE_NOW:
|
|
ret = ds2780_get_charge_now(dev_info, &val->intval);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum power_supply_property ds2780_battery_props[] = {
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
|
POWER_SUPPLY_PROP_TEMP,
|
|
POWER_SUPPLY_PROP_MODEL_NAME,
|
|
POWER_SUPPLY_PROP_MANUFACTURER,
|
|
POWER_SUPPLY_PROP_CURRENT_NOW,
|
|
POWER_SUPPLY_PROP_CURRENT_AVG,
|
|
POWER_SUPPLY_PROP_CAPACITY,
|
|
POWER_SUPPLY_PROP_CHARGE_COUNTER,
|
|
POWER_SUPPLY_PROP_CHARGE_NOW,
|
|
};
|
|
|
|
static ssize_t ds2780_get_pmod_enabled(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret;
|
|
u8 control_reg;
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
|
|
/* Get power mode */
|
|
ret = ds2780_get_control_register(dev_info, &control_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return sprintf(buf, "%d\n",
|
|
!!(control_reg & DS2780_CONTROL_REG_PMOD));
|
|
}
|
|
|
|
static ssize_t ds2780_set_pmod_enabled(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t count)
|
|
{
|
|
int ret;
|
|
u8 control_reg, new_setting;
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
|
|
/* Set power mode */
|
|
ret = ds2780_get_control_register(dev_info, &control_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = kstrtou8(buf, 0, &new_setting);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if ((new_setting != 0) && (new_setting != 1)) {
|
|
dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (new_setting)
|
|
control_reg |= DS2780_CONTROL_REG_PMOD;
|
|
else
|
|
control_reg &= ~DS2780_CONTROL_REG_PMOD;
|
|
|
|
ret = ds2780_set_control_register(dev_info, control_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t ds2780_get_sense_resistor_value(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret;
|
|
u8 sense_resistor;
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
|
|
ret = ds2780_read8(dev_info, &sense_resistor, DS2780_RSNSP_REG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = sprintf(buf, "%d\n", sense_resistor);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t ds2780_set_sense_resistor_value(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t count)
|
|
{
|
|
int ret;
|
|
u8 new_setting;
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
|
|
ret = kstrtou8(buf, 0, &new_setting);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ds2780_set_sense_register(dev_info, new_setting);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t ds2780_get_rsgain_setting(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret;
|
|
u16 rsgain;
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
|
|
ret = ds2780_get_rsgain_register(dev_info, &rsgain);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return sprintf(buf, "%d\n", rsgain);
|
|
}
|
|
|
|
static ssize_t ds2780_set_rsgain_setting(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t count)
|
|
{
|
|
int ret;
|
|
u16 new_setting;
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
|
|
ret = kstrtou16(buf, 0, &new_setting);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Gain can only be from 0 to 1.999 in steps of .001 */
|
|
if (new_setting > 1999) {
|
|
dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = ds2780_set_rsgain_register(dev_info, new_setting);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t ds2780_get_pio_pin(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret;
|
|
u8 sfr;
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
|
|
ret = ds2780_read8(dev_info, &sfr, DS2780_SFR_REG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = sprintf(buf, "%d\n", sfr & DS2780_SFR_REG_PIOSC);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t ds2780_set_pio_pin(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t count)
|
|
{
|
|
int ret;
|
|
u8 new_setting;
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
|
|
ret = kstrtou8(buf, 0, &new_setting);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if ((new_setting != 0) && (new_setting != 1)) {
|
|
dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = ds2780_write(dev_info, &new_setting,
|
|
DS2780_SFR_REG, sizeof(u8));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t ds2780_read_param_eeprom_bin(struct file *filp,
|
|
struct kobject *kobj,
|
|
struct bin_attribute *bin_attr,
|
|
char *buf, loff_t off, size_t count)
|
|
{
|
|
struct device *dev = container_of(kobj, struct device, kobj);
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
|
|
return ds2780_read_block(dev_info, buf,
|
|
DS2780_EEPROM_BLOCK1_START + off, count);
|
|
}
|
|
|
|
static ssize_t ds2780_write_param_eeprom_bin(struct file *filp,
|
|
struct kobject *kobj,
|
|
struct bin_attribute *bin_attr,
|
|
char *buf, loff_t off, size_t count)
|
|
{
|
|
struct device *dev = container_of(kobj, struct device, kobj);
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
int ret;
|
|
|
|
ret = ds2780_write(dev_info, buf,
|
|
DS2780_EEPROM_BLOCK1_START + off, count);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK1_START);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static struct bin_attribute ds2780_param_eeprom_bin_attr = {
|
|
.attr = {
|
|
.name = "param_eeprom",
|
|
.mode = S_IRUGO | S_IWUSR,
|
|
},
|
|
.size = DS2780_PARAM_EEPROM_SIZE,
|
|
.read = ds2780_read_param_eeprom_bin,
|
|
.write = ds2780_write_param_eeprom_bin,
|
|
};
|
|
|
|
static ssize_t ds2780_read_user_eeprom_bin(struct file *filp,
|
|
struct kobject *kobj,
|
|
struct bin_attribute *bin_attr,
|
|
char *buf, loff_t off, size_t count)
|
|
{
|
|
struct device *dev = container_of(kobj, struct device, kobj);
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
|
|
return ds2780_read_block(dev_info, buf,
|
|
DS2780_EEPROM_BLOCK0_START + off, count);
|
|
}
|
|
|
|
static ssize_t ds2780_write_user_eeprom_bin(struct file *filp,
|
|
struct kobject *kobj,
|
|
struct bin_attribute *bin_attr,
|
|
char *buf, loff_t off, size_t count)
|
|
{
|
|
struct device *dev = container_of(kobj, struct device, kobj);
|
|
struct power_supply *psy = to_power_supply(dev);
|
|
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
|
|
int ret;
|
|
|
|
ret = ds2780_write(dev_info, buf,
|
|
DS2780_EEPROM_BLOCK0_START + off, count);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK0_START);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static struct bin_attribute ds2780_user_eeprom_bin_attr = {
|
|
.attr = {
|
|
.name = "user_eeprom",
|
|
.mode = S_IRUGO | S_IWUSR,
|
|
},
|
|
.size = DS2780_USER_EEPROM_SIZE,
|
|
.read = ds2780_read_user_eeprom_bin,
|
|
.write = ds2780_write_user_eeprom_bin,
|
|
};
|
|
|
|
static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2780_get_pmod_enabled,
|
|
ds2780_set_pmod_enabled);
|
|
static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR,
|
|
ds2780_get_sense_resistor_value, ds2780_set_sense_resistor_value);
|
|
static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2780_get_rsgain_setting,
|
|
ds2780_set_rsgain_setting);
|
|
static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2780_get_pio_pin,
|
|
ds2780_set_pio_pin);
|
|
|
|
|
|
static struct attribute *ds2780_attributes[] = {
|
|
&dev_attr_pmod_enabled.attr,
|
|
&dev_attr_sense_resistor_value.attr,
|
|
&dev_attr_rsgain_setting.attr,
|
|
&dev_attr_pio_pin.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group ds2780_attr_group = {
|
|
.attrs = ds2780_attributes,
|
|
};
|
|
|
|
static int ds2780_battery_probe(struct platform_device *pdev)
|
|
{
|
|
struct power_supply_config psy_cfg = {};
|
|
int ret = 0;
|
|
struct ds2780_device_info *dev_info;
|
|
|
|
dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL);
|
|
if (!dev_info) {
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, dev_info);
|
|
|
|
dev_info->dev = &pdev->dev;
|
|
dev_info->w1_dev = pdev->dev.parent;
|
|
dev_info->bat_desc.name = dev_name(&pdev->dev);
|
|
dev_info->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
|
|
dev_info->bat_desc.properties = ds2780_battery_props;
|
|
dev_info->bat_desc.num_properties = ARRAY_SIZE(ds2780_battery_props);
|
|
dev_info->bat_desc.get_property = ds2780_battery_get_property;
|
|
|
|
psy_cfg.drv_data = dev_info;
|
|
|
|
dev_info->bat = power_supply_register(&pdev->dev, &dev_info->bat_desc,
|
|
&psy_cfg);
|
|
if (IS_ERR(dev_info->bat)) {
|
|
dev_err(dev_info->dev, "failed to register battery\n");
|
|
ret = PTR_ERR(dev_info->bat);
|
|
goto fail;
|
|
}
|
|
|
|
ret = sysfs_create_group(&dev_info->bat->dev.kobj, &ds2780_attr_group);
|
|
if (ret) {
|
|
dev_err(dev_info->dev, "failed to create sysfs group\n");
|
|
goto fail_unregister;
|
|
}
|
|
|
|
ret = sysfs_create_bin_file(&dev_info->bat->dev.kobj,
|
|
&ds2780_param_eeprom_bin_attr);
|
|
if (ret) {
|
|
dev_err(dev_info->dev,
|
|
"failed to create param eeprom bin file");
|
|
goto fail_remove_group;
|
|
}
|
|
|
|
ret = sysfs_create_bin_file(&dev_info->bat->dev.kobj,
|
|
&ds2780_user_eeprom_bin_attr);
|
|
if (ret) {
|
|
dev_err(dev_info->dev,
|
|
"failed to create user eeprom bin file");
|
|
goto fail_remove_bin_file;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail_remove_bin_file:
|
|
sysfs_remove_bin_file(&dev_info->bat->dev.kobj,
|
|
&ds2780_param_eeprom_bin_attr);
|
|
fail_remove_group:
|
|
sysfs_remove_group(&dev_info->bat->dev.kobj, &ds2780_attr_group);
|
|
fail_unregister:
|
|
power_supply_unregister(dev_info->bat);
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
static int ds2780_battery_remove(struct platform_device *pdev)
|
|
{
|
|
struct ds2780_device_info *dev_info = platform_get_drvdata(pdev);
|
|
|
|
/*
|
|
* Remove attributes before unregistering power supply
|
|
* because 'bat' will be freed on power_supply_unregister() call.
|
|
*/
|
|
sysfs_remove_group(&dev_info->bat->dev.kobj, &ds2780_attr_group);
|
|
|
|
power_supply_unregister(dev_info->bat);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ds2780_battery_driver = {
|
|
.driver = {
|
|
.name = "ds2780-battery",
|
|
},
|
|
.probe = ds2780_battery_probe,
|
|
.remove = ds2780_battery_remove,
|
|
};
|
|
|
|
module_platform_driver(ds2780_battery_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>");
|
|
MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauage IC driver");
|
|
MODULE_ALIAS("platform:ds2780-battery");
|