linux/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
Alan M Butler 4f48b7fc5a ARM: Kirkwood: Iomega ix2-200 DT support
Add support for the Iomega ix2-200.
Led's and buttons working as of kernel 3.6-rc2

the 3 lines in the network interface do seem to be required as
removing either causes the network card to not be able to reach
the network (at least on my device).

Product page:
http://go.iomega.com/en/products/network-storage-desktop/storcenter-network-storage-solution/network-hard-drive-ix2-200-cloud/?partner=4735#tech_specsItem_tab

Signed-off-by: Alan M Butler <alanbutty12@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-21 15:12:48 +00:00

106 lines
1.7 KiB
Plaintext

/dts-v1/;
/include/ "kirkwood.dtsi"
/ {
model = "Iomega StorCenter ix2-200";
compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
ocp@f1000000 {
i2c@11000 {
status = "okay";
lm63: lm63@4c {
compatible = "national,lm63";
reg = <0x4c>;
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};
nand@3000000 {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@a0000 {
label = "env";
reg = <0xa0000 0x20000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x100000 0x300000>;
};
partition@400000 {
label = "uInitrd";
reg = <0x540000 0x1000000>;
};
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_led {
label = "status:white:power_led";
gpios = <&gpio0 16 0>;
linux,default-trigger = "default-on";
};
health_led1 {
label = "status:red:health_led";
gpios = <&gpio1 5 0>;
};
health_led2 {
label = "status:white:health_led";
gpios = <&gpio1 4 0>;
};
backup_led {
label = "status:blue:backup_led";
gpios = <&gpio0 15 0>;
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
Power {
label = "Power Button";
linux,code = <116>;
gpios = <&gpio0 14 1>;
};
Reset {
label = "Reset Button";
linux,code = <0x198>;
gpios = <&gpio0 12 1>;
};
OTB {
label = "OTB Button";
linux,code = <133>;
gpios = <&gpio1 3 1>;
};
};
};