linux/drivers/input/misc/drv2665.c
Thomas Gleixner 1802d0beec treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:41 -07:00

314 lines
7.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* DRV2665 haptics driver family
*
* Author: Dan Murphy <dmurphy@ti.com>
*
* Copyright: (C) 2015 Texas Instruments, Inc.
*/
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/regulator/consumer.h>
/* Contol registers */
#define DRV2665_STATUS 0x00
#define DRV2665_CTRL_1 0x01
#define DRV2665_CTRL_2 0x02
#define DRV2665_FIFO 0x0b
/* Status Register */
#define DRV2665_FIFO_FULL BIT(0)
#define DRV2665_FIFO_EMPTY BIT(1)
/* Control 1 Register */
#define DRV2665_25_VPP_GAIN 0x00
#define DRV2665_50_VPP_GAIN 0x01
#define DRV2665_75_VPP_GAIN 0x02
#define DRV2665_100_VPP_GAIN 0x03
#define DRV2665_DIGITAL_IN 0xfc
#define DRV2665_ANALOG_IN BIT(2)
/* Control 2 Register */
#define DRV2665_BOOST_EN BIT(1)
#define DRV2665_STANDBY BIT(6)
#define DRV2665_DEV_RST BIT(7)
#define DRV2665_5_MS_IDLE_TOUT 0x00
#define DRV2665_10_MS_IDLE_TOUT 0x04
#define DRV2665_15_MS_IDLE_TOUT 0x08
#define DRV2665_20_MS_IDLE_TOUT 0x0c
/**
* struct drv2665_data -
* @input_dev - Pointer to the input device
* @client - Pointer to the I2C client
* @regmap - Register map of the device
* @work - Work item used to off load the enable/disable of the vibration
* @regulator - Pointer to the regulator for the IC
*/
struct drv2665_data {
struct input_dev *input_dev;
struct i2c_client *client;
struct regmap *regmap;
struct work_struct work;
struct regulator *regulator;
};
/* 8kHz Sine wave to stream to the FIFO */
static const u8 drv2665_sine_wave_form[] = {
0x00, 0x10, 0x20, 0x2e, 0x3c, 0x48, 0x53, 0x5b, 0x61, 0x65, 0x66,
0x65, 0x61, 0x5b, 0x53, 0x48, 0x3c, 0x2e, 0x20, 0x10,
0x00, 0xf0, 0xe0, 0xd2, 0xc4, 0xb8, 0xad, 0xa5, 0x9f, 0x9b, 0x9a,
0x9b, 0x9f, 0xa5, 0xad, 0xb8, 0xc4, 0xd2, 0xe0, 0xf0, 0x00,
};
static const struct reg_default drv2665_reg_defs[] = {
{ DRV2665_STATUS, 0x02 },
{ DRV2665_CTRL_1, 0x28 },
{ DRV2665_CTRL_2, 0x40 },
{ DRV2665_FIFO, 0x00 },
};
static void drv2665_worker(struct work_struct *work)
{
struct drv2665_data *haptics =
container_of(work, struct drv2665_data, work);
unsigned int read_buf;
int error;
error = regmap_read(haptics->regmap, DRV2665_STATUS, &read_buf);
if (error) {
dev_err(&haptics->client->dev,
"Failed to read status: %d\n", error);
return;
}
if (read_buf & DRV2665_FIFO_EMPTY) {
error = regmap_bulk_write(haptics->regmap,
DRV2665_FIFO,
drv2665_sine_wave_form,
ARRAY_SIZE(drv2665_sine_wave_form));
if (error) {
dev_err(&haptics->client->dev,
"Failed to write FIFO: %d\n", error);
return;
}
}
}
static int drv2665_haptics_play(struct input_dev *input, void *data,
struct ff_effect *effect)
{
struct drv2665_data *haptics = input_get_drvdata(input);
schedule_work(&haptics->work);
return 0;
}
static void drv2665_close(struct input_dev *input)
{
struct drv2665_data *haptics = input_get_drvdata(input);
int error;
cancel_work_sync(&haptics->work);
error = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
DRV2665_STANDBY, DRV2665_STANDBY);
if (error)
dev_err(&haptics->client->dev,
"Failed to enter standby mode: %d\n", error);
}
static const struct reg_sequence drv2665_init_regs[] = {
{ DRV2665_CTRL_2, 0 | DRV2665_10_MS_IDLE_TOUT },
{ DRV2665_CTRL_1, DRV2665_25_VPP_GAIN },
};
static int drv2665_init(struct drv2665_data *haptics)
{
int error;
error = regmap_register_patch(haptics->regmap,
drv2665_init_regs,
ARRAY_SIZE(drv2665_init_regs));
if (error) {
dev_err(&haptics->client->dev,
"Failed to write init registers: %d\n",
error);
return error;
}
return 0;
}
static const struct regmap_config drv2665_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = DRV2665_FIFO,
.reg_defaults = drv2665_reg_defs,
.num_reg_defaults = ARRAY_SIZE(drv2665_reg_defs),
.cache_type = REGCACHE_NONE,
};
static int drv2665_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct drv2665_data *haptics;
int error;
haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
if (!haptics)
return -ENOMEM;
haptics->regulator = devm_regulator_get(&client->dev, "vbat");
if (IS_ERR(haptics->regulator)) {
error = PTR_ERR(haptics->regulator);
dev_err(&client->dev,
"unable to get regulator, error: %d\n", error);
return error;
}
haptics->input_dev = devm_input_allocate_device(&client->dev);
if (!haptics->input_dev) {
dev_err(&client->dev, "Failed to allocate input device\n");
return -ENOMEM;
}
haptics->input_dev->name = "drv2665:haptics";
haptics->input_dev->dev.parent = client->dev.parent;
haptics->input_dev->close = drv2665_close;
input_set_drvdata(haptics->input_dev, haptics);
input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
error = input_ff_create_memless(haptics->input_dev, NULL,
drv2665_haptics_play);
if (error) {
dev_err(&client->dev, "input_ff_create() failed: %d\n",
error);
return error;
}
INIT_WORK(&haptics->work, drv2665_worker);
haptics->client = client;
i2c_set_clientdata(client, haptics);
haptics->regmap = devm_regmap_init_i2c(client, &drv2665_regmap_config);
if (IS_ERR(haptics->regmap)) {
error = PTR_ERR(haptics->regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
error);
return error;
}
error = drv2665_init(haptics);
if (error) {
dev_err(&client->dev, "Device init failed: %d\n", error);
return error;
}
error = input_register_device(haptics->input_dev);
if (error) {
dev_err(&client->dev, "couldn't register input device: %d\n",
error);
return error;
}
return 0;
}
static int __maybe_unused drv2665_suspend(struct device *dev)
{
struct drv2665_data *haptics = dev_get_drvdata(dev);
int ret = 0;
mutex_lock(&haptics->input_dev->mutex);
if (haptics->input_dev->users) {
ret = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
DRV2665_STANDBY, DRV2665_STANDBY);
if (ret) {
dev_err(dev, "Failed to set standby mode\n");
regulator_disable(haptics->regulator);
goto out;
}
ret = regulator_disable(haptics->regulator);
if (ret) {
dev_err(dev, "Failed to disable regulator\n");
regmap_update_bits(haptics->regmap,
DRV2665_CTRL_2,
DRV2665_STANDBY, 0);
}
}
out:
mutex_unlock(&haptics->input_dev->mutex);
return ret;
}
static int __maybe_unused drv2665_resume(struct device *dev)
{
struct drv2665_data *haptics = dev_get_drvdata(dev);
int ret = 0;
mutex_lock(&haptics->input_dev->mutex);
if (haptics->input_dev->users) {
ret = regulator_enable(haptics->regulator);
if (ret) {
dev_err(dev, "Failed to enable regulator\n");
goto out;
}
ret = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
DRV2665_STANDBY, 0);
if (ret) {
dev_err(dev, "Failed to unset standby mode\n");
regulator_disable(haptics->regulator);
goto out;
}
}
out:
mutex_unlock(&haptics->input_dev->mutex);
return ret;
}
static SIMPLE_DEV_PM_OPS(drv2665_pm_ops, drv2665_suspend, drv2665_resume);
static const struct i2c_device_id drv2665_id[] = {
{ "drv2665", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, drv2665_id);
#ifdef CONFIG_OF
static const struct of_device_id drv2665_of_match[] = {
{ .compatible = "ti,drv2665", },
{ }
};
MODULE_DEVICE_TABLE(of, drv2665_of_match);
#endif
static struct i2c_driver drv2665_driver = {
.probe = drv2665_probe,
.driver = {
.name = "drv2665-haptics",
.of_match_table = of_match_ptr(drv2665_of_match),
.pm = &drv2665_pm_ops,
},
.id_table = drv2665_id,
};
module_i2c_driver(drv2665_driver);
MODULE_DESCRIPTION("TI DRV2665 haptics driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");