linux/drivers/scsi/ufs/ufs-qcom.h
Yaniv Gardi f06fcc7155 scsi: ufs-qcom: add QUniPro hardware support and power optimizations
New revisions of UFS host controller supports the new UniPro
hardware controller (referred as QUniPro). This patch adds
the support to enable this new UniPro controller hardware.

This change also adds power optimization for bus scaling feature,
as well as support for HS-G3 power mode.

Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-09 18:03:55 -05:00

259 lines
7.3 KiB
C

/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef UFS_QCOM_H_
#define UFS_QCOM_H_
#define MAX_UFS_QCOM_HOSTS 1
#define MAX_U32 (~(u32)0)
#define MPHY_TX_FSM_STATE 0x41
#define TX_FSM_HIBERN8 0x1
#define HBRN8_POLL_TOUT_MS 100
#define DEFAULT_CLK_RATE_HZ 1000000
#define BUS_VECTOR_NAME_LEN 32
#define UFS_HW_VER_MAJOR_SHFT (28)
#define UFS_HW_VER_MAJOR_MASK (0x000F << UFS_HW_VER_MAJOR_SHFT)
#define UFS_HW_VER_MINOR_SHFT (16)
#define UFS_HW_VER_MINOR_MASK (0x0FFF << UFS_HW_VER_MINOR_SHFT)
#define UFS_HW_VER_STEP_SHFT (0)
#define UFS_HW_VER_STEP_MASK (0xFFFF << UFS_HW_VER_STEP_SHFT)
/* vendor specific pre-defined parameters */
#define SLOW 1
#define FAST 2
#define UFS_QCOM_LIMIT_NUM_LANES_RX 2
#define UFS_QCOM_LIMIT_NUM_LANES_TX 2
#define UFS_QCOM_LIMIT_HSGEAR_RX UFS_HS_G3
#define UFS_QCOM_LIMIT_HSGEAR_TX UFS_HS_G3
#define UFS_QCOM_LIMIT_PWMGEAR_RX UFS_PWM_G4
#define UFS_QCOM_LIMIT_PWMGEAR_TX UFS_PWM_G4
#define UFS_QCOM_LIMIT_RX_PWR_PWM SLOW_MODE
#define UFS_QCOM_LIMIT_TX_PWR_PWM SLOW_MODE
#define UFS_QCOM_LIMIT_RX_PWR_HS FAST_MODE
#define UFS_QCOM_LIMIT_TX_PWR_HS FAST_MODE
#define UFS_QCOM_LIMIT_HS_RATE PA_HS_MODE_B
#define UFS_QCOM_LIMIT_DESIRED_MODE FAST
/* QCOM UFS host controller vendor specific registers */
enum {
REG_UFS_SYS1CLK_1US = 0xC0,
REG_UFS_TX_SYMBOL_CLK_NS_US = 0xC4,
REG_UFS_LOCAL_PORT_ID_REG = 0xC8,
REG_UFS_PA_ERR_CODE = 0xCC,
REG_UFS_RETRY_TIMER_REG = 0xD0,
REG_UFS_PA_LINK_STARTUP_TIMER = 0xD8,
REG_UFS_CFG1 = 0xDC,
REG_UFS_CFG2 = 0xE0,
REG_UFS_HW_VERSION = 0xE4,
UFS_TEST_BUS = 0xE8,
UFS_TEST_BUS_CTRL_0 = 0xEC,
UFS_TEST_BUS_CTRL_1 = 0xF0,
UFS_TEST_BUS_CTRL_2 = 0xF4,
UFS_UNIPRO_CFG = 0xF8,
/*
* QCOM UFS host controller vendor specific registers
* added in HW Version 3.0.0
*/
UFS_AH8_CFG = 0xFC,
};
/* QCOM UFS host controller vendor specific debug registers */
enum {
UFS_DBG_RD_REG_UAWM = 0x100,
UFS_DBG_RD_REG_UARM = 0x200,
UFS_DBG_RD_REG_TXUC = 0x300,
UFS_DBG_RD_REG_RXUC = 0x400,
UFS_DBG_RD_REG_DFC = 0x500,
UFS_DBG_RD_REG_TRLUT = 0x600,
UFS_DBG_RD_REG_TMRLUT = 0x700,
UFS_UFS_DBG_RD_REG_OCSC = 0x800,
UFS_UFS_DBG_RD_DESC_RAM = 0x1500,
UFS_UFS_DBG_RD_PRDT_RAM = 0x1700,
UFS_UFS_DBG_RD_RESP_RAM = 0x1800,
UFS_UFS_DBG_RD_EDTL_RAM = 0x1900,
};
#define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x) (0x000 + x)
#define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x) (0x400 + x)
/* bit definitions for REG_UFS_CFG1 register */
#define QUNIPRO_SEL UFS_BIT(0)
#define TEST_BUS_EN BIT(18)
#define TEST_BUS_SEL GENMASK(22, 19)
/* bit definitions for REG_UFS_CFG2 register */
#define UAWM_HW_CGC_EN (1 << 0)
#define UARM_HW_CGC_EN (1 << 1)
#define TXUC_HW_CGC_EN (1 << 2)
#define RXUC_HW_CGC_EN (1 << 3)
#define DFC_HW_CGC_EN (1 << 4)
#define TRLUT_HW_CGC_EN (1 << 5)
#define TMRLUT_HW_CGC_EN (1 << 6)
#define OCSC_HW_CGC_EN (1 << 7)
/* bit definition for UFS_UFS_TEST_BUS_CTRL_n */
#define TEST_BUS_SUB_SEL_MASK 0x1F /* All XXX_SEL fields are 5 bits wide */
#define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\
TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\
DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\
TMRLUT_HW_CGC_EN | OCSC_HW_CGC_EN)
/* bit offset */
enum {
OFFSET_UFS_PHY_SOFT_RESET = 1,
OFFSET_CLK_NS_REG = 10,
};
/* bit masks */
enum {
MASK_UFS_PHY_SOFT_RESET = 0x2,
MASK_TX_SYMBOL_CLK_1US_REG = 0x3FF,
MASK_CLK_NS_REG = 0xFFFC00,
};
enum ufs_qcom_phy_init_type {
UFS_PHY_INIT_FULL,
UFS_PHY_INIT_CFG_RESTORE,
};
/* QCOM UFS debug print bit mask */
#define UFS_QCOM_DBG_PRINT_REGS_EN BIT(0)
#define UFS_QCOM_DBG_PRINT_ICE_REGS_EN BIT(1)
#define UFS_QCOM_DBG_PRINT_TEST_BUS_EN BIT(2)
#define UFS_QCOM_DBG_PRINT_ALL \
(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_ICE_REGS_EN | \
UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
/* QUniPro Vendor specific attributes */
#define DME_VS_CORE_CLK_CTRL 0xD002
/* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT BIT(8)
#define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK 0xFF
static inline void
ufs_qcom_get_controller_revision(struct ufs_hba *hba,
u8 *major, u16 *minor, u16 *step)
{
u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION);
*major = (ver & UFS_HW_VER_MAJOR_MASK) >> UFS_HW_VER_MAJOR_SHFT;
*minor = (ver & UFS_HW_VER_MINOR_MASK) >> UFS_HW_VER_MINOR_SHFT;
*step = (ver & UFS_HW_VER_STEP_MASK) >> UFS_HW_VER_STEP_SHFT;
};
static inline void ufs_qcom_assert_reset(struct ufs_hba *hba)
{
ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
1 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
/*
* Make sure assertion of ufs phy reset is written to
* register before returning
*/
mb();
}
static inline void ufs_qcom_deassert_reset(struct ufs_hba *hba)
{
ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
0 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
/*
* Make sure de-assertion of ufs phy reset is written to
* register before returning
*/
mb();
}
struct ufs_qcom_bus_vote {
uint32_t client_handle;
uint32_t curr_vote;
int min_bw_vote;
int max_bw_vote;
int saved_vote;
bool is_max_bw_needed;
struct device_attribute max_bus_bw;
};
/* Host controller hardware version: major.minor.step */
struct ufs_hw_version {
u16 step;
u16 minor;
u8 major;
};
struct ufs_qcom_testbus {
u8 select_major;
u8 select_minor;
};
struct ufs_qcom_host {
/*
* Set this capability if host controller supports the QUniPro mode
* and if driver wants the Host controller to operate in QUniPro mode.
* Note: By default this capability will be kept enabled if host
* controller supports the QUniPro mode.
*/
#define UFS_QCOM_CAP_QUNIPRO UFS_BIT(0)
/*
* Set this capability if host controller can retain the secure
* configuration even after UFS controller core power collapse.
*/
#define UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE UFS_BIT(1)
u32 caps;
struct phy *generic_phy;
struct ufs_hba *hba;
struct ufs_qcom_bus_vote bus_vote;
struct ufs_pa_layer_attr dev_req_params;
struct clk *rx_l0_sync_clk;
struct clk *tx_l0_sync_clk;
struct clk *rx_l1_sync_clk;
struct clk *tx_l1_sync_clk;
bool is_lane_clks_enabled;
void __iomem *dev_ref_clk_ctrl_mmio;
bool is_dev_ref_clk_enabled;
struct ufs_hw_version hw_ver;
u32 dev_ref_clk_en_mask;
/* Bitmask for enabling debug prints */
u32 dbg_print_en;
struct ufs_qcom_testbus testbus;
};
#define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
#define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
#define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
int ufs_qcom_testbus_config(struct ufs_qcom_host *host);
static inline bool ufs_qcom_cap_qunipro(struct ufs_qcom_host *host)
{
if (host->caps & UFS_QCOM_CAP_QUNIPRO)
return true;
else
return false;
}
#endif /* UFS_QCOM_H_ */