linux/arch/arm/boot/dts/kirkwood-dns325.dts
Sebastian Hesselbarth ab8336147b ARM: dts: kirkwood: add stdout-path property to all boards
ePAPR allows to reference the device used for console output by
stdout-path property. With node labels for Kirkwood UART0, now
reference it on all Kirkwood boards that already have ttyS0 in
their bootargs property.

While at it, fix some whitespace issues on mplcec4's chosen node
(there are more, but we only fix the chosen node now)

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-4-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05 00:48:35 +00:00

63 lines
1.2 KiB
Plaintext

/dts-v1/;
#include "kirkwood-dnskw.dtsi"
/ {
model = "D-Link DNS-325 NAS (Rev A1)";
compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
&pmx_led_red_left_hdd &pmx_led_red_right_hdd
&pmx_led_white_usb>;
pinctrl-names = "default";
white-power {
label = "dns325:white:power";
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
white-usb {
label = "dns325:white:usb";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
};
red-l_hdd {
label = "dns325:red:l_hdd";
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
red-r_hdd {
label = "dns325:red:r_hdd";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
red-usb {
label = "dns325:red:usb";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
ocp@f1000000 {
i2c@11000 {
status = "okay";
lm75: lm75@48 {
compatible = "national,lm75";
reg = <0x48>;
};
};
serial@12000 {
status = "okay";
};
};
};