linux/arch/mips/alchemy/common/sleeper.S
Manuel Lauss 564365b0fc MIPS: Alchemy: Fix up PM code on Au1550/Au1200
Au1550/Au1200 have a different memory controller which requires additi-
onal code to properly put memory to sleep (code taken from AMD/RMI's
Linux-2.6.11 source package).

Also fix up the remaining pm-related paths to compile on Au1200/Au1550
platforms.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:27 +00:00

173 lines
3.6 KiB
ArmAsm

/*
* Copyright 2002 Embedded Edge, LLC
* Author: dan@embeddededge.com
*
* Sleep helper for Au1xxx sleep mode.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <asm/asm.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
.extern __flush_cache_all
.text
.set noreorder
.set noat
.align 5
/* Save all of the processor general registers and go to sleep.
* A wakeup condition will get us back here to restore the registers.
*/
LEAF(au1xxx_save_and_sleep)
subu sp, PT_SIZE
sw $1, PT_R1(sp)
sw $2, PT_R2(sp)
sw $3, PT_R3(sp)
sw $4, PT_R4(sp)
sw $5, PT_R5(sp)
sw $6, PT_R6(sp)
sw $7, PT_R7(sp)
sw $16, PT_R16(sp)
sw $17, PT_R17(sp)
sw $18, PT_R18(sp)
sw $19, PT_R19(sp)
sw $20, PT_R20(sp)
sw $21, PT_R21(sp)
sw $22, PT_R22(sp)
sw $23, PT_R23(sp)
sw $26, PT_R26(sp)
sw $27, PT_R27(sp)
sw $28, PT_R28(sp)
sw $30, PT_R30(sp)
sw $31, PT_R31(sp)
mfc0 k0, CP0_STATUS
sw k0, 0x20(sp)
mfc0 k0, CP0_CONTEXT
sw k0, 0x1c(sp)
mfc0 k0, CP0_PAGEMASK
sw k0, 0x18(sp)
mfc0 k0, CP0_CONFIG
sw k0, 0x14(sp)
/* flush caches to make sure context is in memory */
la t1, __flush_cache_all
lw t0, 0(t1)
jalr t0
nop
/* Now set up the scratch registers so the boot rom will
* return to this point upon wakeup.
* sys_scratch0 : SP
* sys_scratch1 : RA
*/
lui t3, 0xb190 /* sys_xxx */
sw sp, 0x0018(t3)
la k0, 3f /* resume path */
sw k0, 0x001c(t3)
/* Put SDRAM into self refresh: Preload instructions into cache,
* issue a precharge, auto/self refresh, then sleep commands to it.
*/
la t0, 1f
.set mips3
cache 0x14, 0(t0)
cache 0x14, 32(t0)
cache 0x14, 64(t0)
cache 0x14, 96(t0)
.set mips0
1: lui a0, 0xb400 /* mem_xxx */
#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) || \
defined(CONFIG_SOC_AU1500)
sw zero, 0x001c(a0) /* Precharge */
sync
sw zero, 0x0020(a0) /* Auto Refresh */
sync
sw zero, 0x0030(a0) /* Sleep */
sync
#endif
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
sw zero, 0x08c0(a0) /* Precharge */
sync
sw zero, 0x08d0(a0) /* Self Refresh */
sync
/* wait for sdram to enter self-refresh mode */
lui t0, 0x0100
2: lw t1, 0x0850(a0) /* mem_sdstat */
and t2, t1, t0
beq t2, zero, 2b
nop
/* disable SDRAM clocks */
lui t0, 0xcfff
ori t0, t0, 0xffff
lw t1, 0x0840(a0) /* mem_sdconfiga */
and t1, t0, t1 /* clear CE[1:0] */
sw t1, 0x0840(a0) /* mem_sdconfiga */
sync
#endif
/* put power supply and processor to sleep */
sw zero, 0x0078(t3) /* sys_slppwr */
sync
sw zero, 0x007c(t3) /* sys_sleep */
sync
nop
nop
nop
nop
nop
nop
nop
nop
/* This is where we return upon wakeup.
* Reload all of the registers and return.
*/
3: lw k0, 0x20(sp)
mtc0 k0, CP0_STATUS
lw k0, 0x1c(sp)
mtc0 k0, CP0_CONTEXT
lw k0, 0x18(sp)
mtc0 k0, CP0_PAGEMASK
lw k0, 0x14(sp)
mtc0 k0, CP0_CONFIG
/* We need to catch the early Alchemy SOCs with
* the write-only Config[OD] bit and set it back to one...
*/
jal au1x00_fixup_config_od
nop
lw $1, PT_R1(sp)
lw $2, PT_R2(sp)
lw $3, PT_R3(sp)
lw $4, PT_R4(sp)
lw $5, PT_R5(sp)
lw $6, PT_R6(sp)
lw $7, PT_R7(sp)
lw $16, PT_R16(sp)
lw $17, PT_R17(sp)
lw $18, PT_R18(sp)
lw $19, PT_R19(sp)
lw $20, PT_R20(sp)
lw $21, PT_R21(sp)
lw $22, PT_R22(sp)
lw $23, PT_R23(sp)
lw $26, PT_R26(sp)
lw $27, PT_R27(sp)
lw $28, PT_R28(sp)
lw $30, PT_R30(sp)
lw $31, PT_R31(sp)
jr ra
addiu sp, PT_SIZE
END(au1xxx_save_and_sleep)