linux/arch/arm/mach-omap2/clock.c
Tero Kristo e9e63088e4 clk: ti: remove exported ll_ops struct, instead add an API for registration
We should avoid exporting data from drivers, instead use an API for
registering the clock low level operations.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:46 +03:00

329 lines
8.8 KiB
C

/*
* linux/arch/arm/mach-omap2/clock.c
*
* Copyright (C) 2005-2008 Texas Instruments, Inc.
* Copyright (C) 2004-2010 Nokia Corporation
*
* Contacts:
* Richard Woodruff <r-woodruff2@ti.com>
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/regmap.h>
#include <linux/of_address.h>
#include <linux/bootmem.h>
#include <asm/cpu.h>
#include <trace/events/power.h>
#include "soc.h"
#include "clockdomain.h"
#include "clock.h"
#include "cm.h"
#include "cm2xxx.h"
#include "cm3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
#include "common.h"
u16 cpu_mask;
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000
#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000
/*
* DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
* From device data manual section 4.3 "DPLL and DLL Specifications".
*/
#define OMAP3PLUS_DPLL_FINT_MIN 32000
#define OMAP3PLUS_DPLL_FINT_MAX 52000000
struct clk_iomap {
struct regmap *regmap;
void __iomem *mem;
};
static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
static void clk_memmap_writel(u32 val, void __iomem *reg)
{
struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
struct clk_iomap *io = clk_memmaps[r->index];
if (io->regmap)
regmap_write(io->regmap, r->offset, val);
else
writel_relaxed(val, io->mem + r->offset);
}
static u32 clk_memmap_readl(void __iomem *reg)
{
u32 val;
struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
struct clk_iomap *io = clk_memmaps[r->index];
if (io->regmap)
regmap_read(io->regmap, r->offset, &val);
else
val = readl_relaxed(io->mem + r->offset);
return val;
}
void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
{
if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
writel_relaxed(val, reg);
else
clk_memmap_writel(val, reg);
}
u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
{
if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
return readl_relaxed(reg);
else
return clk_memmap_readl(reg);
}
static struct ti_clk_ll_ops omap_clk_ll_ops = {
.clk_readl = clk_memmap_readl,
.clk_writel = clk_memmap_writel,
.clkdm_clk_enable = clkdm_clk_enable,
.clkdm_clk_disable = clkdm_clk_disable,
.cm_wait_module_ready = omap_cm_wait_module_ready,
.cm_split_idlest_reg = cm_split_idlest_reg,
};
/**
* omap2_clk_setup_ll_ops - setup clock driver low-level ops
*
* Sets up clock driver low-level platform ops. These are needed
* for register accesses and various other misc platform operations.
* Returns 0 on success, -EBUSY if low level ops have been registered
* already.
*/
int __init omap2_clk_setup_ll_ops(void)
{
return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
}
/**
* omap2_clk_provider_init - initialize a clock provider
* @match_table: DT device table to match for devices to init
* @np: device node pointer for the this clock provider
* @index: index for the clock provider
+ @syscon: syscon regmap pointer
* @mem: iomem pointer for the clock provider memory area, only used if
* syscon is not provided
*
* Initializes a clock provider module (CM/PRM etc.), registering
* the memory mapping at specified index and initializing the
* low level driver infrastructure. Returns 0 in success.
*/
int __init omap2_clk_provider_init(struct device_node *np, int index,
struct regmap *syscon, void __iomem *mem)
{
struct clk_iomap *io;
io = kzalloc(sizeof(*io), GFP_KERNEL);
io->regmap = syscon;
io->mem = mem;
clk_memmaps[index] = io;
ti_dt_clk_init_provider(np, index);
return 0;
}
/**
* omap2_clk_legacy_provider_init - initialize a legacy clock provider
* @index: index for the clock provider
* @mem: iomem pointer for the clock provider memory area
*
* Initializes a legacy clock provider memory mapping.
*/
void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
{
struct clk_iomap *io;
io = memblock_virt_alloc(sizeof(*io), 0);
io->mem = mem;
clk_memmaps[index] = io;
}
/*
* OMAP2+ specific clock functions
*/
/* Private functions */
/* Public functions */
/**
* omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
* @clk: OMAP clock struct ptr to use
*
* Convert a clockdomain name stored in a struct clk 'clk' into a
* clockdomain pointer, and save it into the struct clk. Intended to be
* called during clk_register(). No return value.
*/
void omap2_init_clk_clkdm(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
struct clockdomain *clkdm;
const char *clk_name;
if (!clk->clkdm_name)
return;
clk_name = __clk_get_name(hw->clk);
clkdm = clkdm_lookup(clk->clkdm_name);
if (clkdm) {
pr_debug("clock: associated clk %s to clkdm %s\n",
clk_name, clk->clkdm_name);
clk->clkdm = clkdm;
} else {
pr_debug("clock: could not associate clk %s to clkdm %s\n",
clk_name, clk->clkdm_name);
}
}
static int __initdata mpurate;
/*
* By default we use the rate set by the bootloader.
* You can override this with mpurate= cmdline option.
*/
static int __init omap_clk_setup(char *str)
{
get_option(&str, &mpurate);
if (!mpurate)
return 1;
if (mpurate < 1000)
mpurate *= 1000000;
return 1;
}
__setup("mpurate=", omap_clk_setup);
/**
* omap2_clk_print_new_rates - print summary of current clock tree rates
* @hfclkin_ck_name: clk name for the off-chip HF oscillator
* @core_ck_name: clk name for the on-chip CORE_CLK
* @mpu_ck_name: clk name for the ARM MPU clock
*
* Prints a short message to the console with the HFCLKIN oscillator
* rate, the rate of the CORE clock, and the rate of the ARM MPU clock.
* Called by the boot-time MPU rate switching code. XXX This is intended
* to be handled by the OPP layer code in the near future and should be
* removed from the clock code. No return value.
*/
void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name)
{
struct clk *hfclkin_ck, *core_ck, *mpu_ck;
unsigned long hfclkin_rate;
mpu_ck = clk_get(NULL, mpu_ck_name);
if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name))
return;
core_ck = clk_get(NULL, core_ck_name);
if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name))
return;
hfclkin_ck = clk_get(NULL, hfclkin_ck_name);
if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name))
return;
hfclkin_rate = clk_get_rate(hfclkin_ck);
pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
(hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10),
(clk_get_rate(core_ck) / 1000000),
(clk_get_rate(mpu_ck) / 1000000));
}
/**
* ti_clk_init_features - init clock features struct for the SoC
*
* Initializes the clock features struct based on the SoC type.
*/
void __init ti_clk_init_features(void)
{
struct ti_clk_features features = { 0 };
/* Fint setup for DPLLs */
if (cpu_is_omap3430()) {
features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
} else {
features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
}
/* Bypass value setup for DPLLs */
if (cpu_is_omap24xx()) {
features.dpll_bypass_vals |=
(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
} else if (cpu_is_omap34xx()) {
features.dpll_bypass_vals |=
(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
soc_is_omap54xx() || soc_is_dra7xx()) {
features.dpll_bypass_vals |=
(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
}
/* Jitter correction only available on OMAP343X */
if (cpu_is_omap343x())
features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
/* Idlest value for interface clocks.
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
if (cpu_is_omap24xx())
features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
else if (cpu_is_omap34xx())
features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
if (omap_rev() == OMAP3430_REV_ES1_0)
features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
ti_clk_setup_features(&features);
}