linux/drivers/net/pch_gbe/pch_gbe_phy.c
David Decotigny 7073949720 ethtool: cosmetic: Use ethtool ethtool_cmd_speed API
This updates the network drivers so that they don't access the
ethtool_cmd::speed field directly, but use ethtool_cmd_speed()
instead.

For most of the drivers, these changes are purely cosmetic and don't
fix any problem, such as for those 1GbE/10GbE drivers that indirectly
call their own ethtool get_settings()/mii_ethtool_gset(). The changes
are meant to enforce code consistency and provide robustness with
future larger throughputs, at the expense of a few CPU cycles for each
ethtool operation.

All drivers compiled with make allyesconfig ion x86_64 have been
updated.

Tested: make allyesconfig on x86_64 + e1000e/bnx2x work
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29 14:03:01 -07:00

275 lines
9.3 KiB
C

/*
* Copyright (C) 1999 - 2010 Intel Corporation.
* Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
*
* This code was derived from the Intel e1000e Linux driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#include "pch_gbe.h"
#include "pch_gbe_phy.h"
#define PHY_MAX_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
/* PHY 1000 MII Register/Bit Definitions */
/* PHY Registers defined by IEEE */
#define PHY_CONTROL 0x00 /* Control Register */
#define PHY_STATUS 0x01 /* Status Regiser */
#define PHY_ID1 0x02 /* Phy Id Register (word 1) */
#define PHY_ID2 0x03 /* Phy Id Register (word 2) */
#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Register */
#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Register */
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Register */
#define PHY_EXT_STATUS 0x0F /* Extended Status Register */
#define PHY_PHYSP_CONTROL 0x10 /* PHY Specific Control Register */
#define PHY_EXT_PHYSP_CONTROL 0x14 /* Extended PHY Specific Control Register */
#define PHY_LED_CONTROL 0x18 /* LED Control Register */
#define PHY_EXT_PHYSP_STATUS 0x1B /* Extended PHY Specific Status Register */
/* PHY Control Register */
#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
#define MII_CR_POWER_DOWN 0x0800 /* Power down */
#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
#define MII_CR_SPEED_1000 0x0040
#define MII_CR_SPEED_100 0x2000
#define MII_CR_SPEED_10 0x0000
/* PHY Status Register */
#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
/* Phy Id Register (word 2) */
#define PHY_REVISION_MASK 0x000F
/* PHY Specific Control Register */
#define PHYSP_CTRL_ASSERT_CRS_TX 0x0800
/* Default value of PHY register */
#define PHY_CONTROL_DEFAULT 0x1140 /* Control Register */
#define PHY_AUTONEG_ADV_DEFAULT 0x01e0 /* Autoneg Advertisement */
#define PHY_NEXT_PAGE_TX_DEFAULT 0x2001 /* Next Page TX */
#define PHY_1000T_CTRL_DEFAULT 0x0300 /* 1000Base-T Control Register */
#define PHY_PHYSP_CONTROL_DEFAULT 0x01EE /* PHY Specific Control Register */
/**
* pch_gbe_phy_get_id - Retrieve the PHY ID and revision
* @hw: Pointer to the HW structure
* Returns
* 0: Successful.
* Negative value: Failed.
*/
s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw)
{
struct pch_gbe_phy_info *phy = &hw->phy;
s32 ret;
u16 phy_id1;
u16 phy_id2;
ret = pch_gbe_phy_read_reg_miic(hw, PHY_ID1, &phy_id1);
if (ret)
return ret;
ret = pch_gbe_phy_read_reg_miic(hw, PHY_ID2, &phy_id2);
if (ret)
return ret;
/*
* PHY_ID1: [bit15-0:ID(21-6)]
* PHY_ID2: [bit15-10:ID(5-0)][bit9-4:Model][bit3-0:revision]
*/
phy->id = (u32)phy_id1;
phy->id = ((phy->id << 6) | ((phy_id2 & 0xFC00) >> 10));
phy->revision = (u32) (phy_id2 & 0x000F);
pr_debug("phy->id : 0x%08x phy->revision : 0x%08x\n",
phy->id, phy->revision);
return 0;
}
/**
* pch_gbe_phy_read_reg_miic - Read MII control register
* @hw: Pointer to the HW structure
* @offset: Register offset to be read
* @data: Pointer to the read data
* Returns
* 0: Successful.
* -EINVAL: Invalid argument.
*/
s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data)
{
struct pch_gbe_phy_info *phy = &hw->phy;
if (offset > PHY_MAX_REG_ADDRESS) {
pr_err("PHY Address %d is out of range\n", offset);
return -EINVAL;
}
*data = pch_gbe_mac_ctrl_miim(hw, phy->addr, PCH_GBE_HAL_MIIM_READ,
offset, (u16)0);
return 0;
}
/**
* pch_gbe_phy_write_reg_miic - Write MII control register
* @hw: Pointer to the HW structure
* @offset: Register offset to be read
* @data: data to write to register at offset
* Returns
* 0: Successful.
* -EINVAL: Invalid argument.
*/
s32 pch_gbe_phy_write_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 data)
{
struct pch_gbe_phy_info *phy = &hw->phy;
if (offset > PHY_MAX_REG_ADDRESS) {
pr_err("PHY Address %d is out of range\n", offset);
return -EINVAL;
}
pch_gbe_mac_ctrl_miim(hw, phy->addr, PCH_GBE_HAL_MIIM_WRITE,
offset, data);
return 0;
}
/**
* pch_gbe_phy_sw_reset - PHY software reset
* @hw: Pointer to the HW structure
*/
void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw)
{
u16 phy_ctrl;
pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &phy_ctrl);
phy_ctrl |= MII_CR_RESET;
pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, phy_ctrl);
udelay(1);
}
/**
* pch_gbe_phy_hw_reset - PHY hardware reset
* @hw: Pointer to the HW structure
*/
void pch_gbe_phy_hw_reset(struct pch_gbe_hw *hw)
{
pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, PHY_CONTROL_DEFAULT);
pch_gbe_phy_write_reg_miic(hw, PHY_AUTONEG_ADV,
PHY_AUTONEG_ADV_DEFAULT);
pch_gbe_phy_write_reg_miic(hw, PHY_NEXT_PAGE_TX,
PHY_NEXT_PAGE_TX_DEFAULT);
pch_gbe_phy_write_reg_miic(hw, PHY_1000T_CTRL, PHY_1000T_CTRL_DEFAULT);
pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL,
PHY_PHYSP_CONTROL_DEFAULT);
}
/**
* pch_gbe_phy_power_up - restore link in case the phy was powered down
* @hw: Pointer to the HW structure
*/
void pch_gbe_phy_power_up(struct pch_gbe_hw *hw)
{
u16 mii_reg;
mii_reg = 0;
/* Just clear the power down bit to wake the phy back up */
/* according to the manual, the phy will retain its
* settings across a power-down/up cycle */
pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &mii_reg);
mii_reg &= ~MII_CR_POWER_DOWN;
pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, mii_reg);
}
/**
* pch_gbe_phy_power_down - Power down PHY
* @hw: Pointer to the HW structure
*/
void pch_gbe_phy_power_down(struct pch_gbe_hw *hw)
{
u16 mii_reg;
mii_reg = 0;
/* Power down the PHY so no link is implied when interface is down *
* The PHY cannot be powered down if any of the following is TRUE *
* (a) WoL is enabled
* (b) AMT is active
*/
pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &mii_reg);
mii_reg |= MII_CR_POWER_DOWN;
pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, mii_reg);
mdelay(1);
}
/**
* pch_gbe_phy_set_rgmii - RGMII interface setting
* @hw: Pointer to the HW structure
*/
inline void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw)
{
pch_gbe_phy_sw_reset(hw);
}
/**
* pch_gbe_phy_init_setting - PHY initial setting
* @hw: Pointer to the HW structure
*/
void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
{
struct pch_gbe_adapter *adapter;
struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
int ret;
u16 mii_reg;
adapter = container_of(hw, struct pch_gbe_adapter, hw);
ret = mii_ethtool_gset(&adapter->mii, &cmd);
if (ret)
pr_err("Error: mii_ethtool_gset\n");
ethtool_cmd_speed_set(&cmd, hw->mac.link_speed);
cmd.duplex = hw->mac.link_duplex;
cmd.advertising = hw->phy.autoneg_advertised;
cmd.autoneg = hw->mac.autoneg;
pch_gbe_phy_write_reg_miic(hw, MII_BMCR, BMCR_RESET);
ret = mii_ethtool_sset(&adapter->mii, &cmd);
if (ret)
pr_err("Error: mii_ethtool_sset\n");
pch_gbe_phy_sw_reset(hw);
pch_gbe_phy_read_reg_miic(hw, PHY_PHYSP_CONTROL, &mii_reg);
mii_reg |= PHYSP_CTRL_ASSERT_CRS_TX;
pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL, mii_reg);
}