linux/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
Markus Pargmann 38918b7275 ARM: dts: imx27 phyCARD-S, i2c ADC device node
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:29:05 +08:00

94 lines
1.7 KiB
Plaintext

/*
* Copyright 2012 Markus Pargmann, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "imx27-phytec-phycard-s-som.dts"
/ {
model = "Phytec pca100 rapid development kit";
compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
display: display {
model = "Primeview-PD050VL1";
native-mode = <&timing0>;
bits-per-pixel = <16>; /* non-standard but required */
fsl,pcr = <0xf0c88080>; /* non-standard but required */
display-timings {
timing0: 640x480 {
hactive = <640>;
vactive = <480>;
hback-porch = <112>;
hfront-porch = <36>;
hsync-len = <32>;
vback-porch = <33>;
vfront-porch = <33>;
vsync-len = <2>;
clock-frequency = <25000000>;
};
};
};
regulators {
compatible = "simple-bus";
reg_3v3: 3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
&fb {
display = <&display>;
status = "okay";
};
&i2c1 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
adc@64 {
compatible = "maxim,max1037";
vcc-supply = <&reg_3v3>;
reg = <0x64>;
};
};
&owire {
status = "okay";
};
&sdhci2 {
cd-gpios = <&gpio3 29 0>;
status = "okay";
};
&uart1 {
fsl,uart-has-rtscts;
status = "okay";
};
&uart2 {
fsl,uart-has-rtscts;
status = "okay";
};
&uart3 {
fsl,uart-has-rtscts;
status = "okay";
};