linux/arch/i386/kernel/vmlinux.lds.S
Vivek Goyal f8657e1b55 [PATCH] i386: move startup_32() in text.head section
o Entry startup_32 was in .text section but it was accessing some init
  data too and it prompts MODPOST to generate compilation warnings.

WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from
.text between '_text' (at offset 0xc0100029) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from
.text between '_text' (at offset 0xc0100037) and 'startup_32_smp'
WARNING: vmlinux - Section mismatch: reference to
.init.data:init_pg_tables_end from .text between '_text' (at offset
0xc0100099) and 'startup_32_smp'

o Can't move startup_32 to .init.text as this entry point has to be at the
  start of bzImage. Hence moved startup_32 to a new section .text.head and
  instructed MODPOST to not to generate warnings if init data is being
  accessed from .text.head section. This code has been audited.

o SMP boot up code (startup_32_smp) can go into .init.text if CPU hotplug
  is not supported. Otherwise it generates more warnings

WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from
.text between 'checkCPUtype' (at offset 0xc0100126) and 'is486'
WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from
.text between 'checkCPUtype' (at offset 0xc0100130) and 'is486'

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-13 13:26:22 +01:00

230 lines
5.8 KiB
ArmAsm

/* ld script to make i386 Linux kernel
* Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
*
* Don't define absolute symbols until and unless you know that symbol
* value is should remain constant even if kernel image is relocated
* at run time. Absolute symbols are not relocated. If symbol value should
* change if kernel is relocated, make the symbol section relative and
* put it inside the section definition.
*/
/* Don't define absolute symbols until and unless you know that symbol
* value is should remain constant even if kernel image is relocated
* at run time. Absolute symbols are not relocated. If symbol value should
* change if kernel is relocated, make the symbol section relative and
* put it inside the section definition.
*/
#define LOAD_OFFSET __PAGE_OFFSET
#include <asm-generic/vmlinux.lds.h>
#include <asm/thread_info.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/boot.h>
OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
OUTPUT_ARCH(i386)
ENTRY(phys_startup_32)
jiffies = jiffies_64;
_proxy_pda = 0;
PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
data PT_LOAD FLAGS(7); /* RWE */
note PT_NOTE FLAGS(4); /* R__ */
}
SECTIONS
{
. = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
phys_startup_32 = startup_32 - LOAD_OFFSET;
.text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
_text = .; /* Text and read-only data */
*(.text.head)
} :text = 0x9090
/* read-only */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
*(.text)
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
*(.fixup)
*(.gnu.warning)
_etext = .; /* End of text section */
} :text = 0x9090
. = ALIGN(16); /* Exception table */
__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
__start___ex_table = .;
*(__ex_table)
__stop___ex_table = .;
}
RODATA
BUG_TABLE
. = ALIGN(4);
.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
__tracedata_start = .;
*(.tracedata)
__tracedata_end = .;
}
/* writeable */
. = ALIGN(4096);
.data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
*(.data)
CONSTRUCTORS
} :data
.paravirtprobe : AT(ADDR(.paravirtprobe) - LOAD_OFFSET) {
__start_paravirtprobe = .;
*(.paravirtprobe)
__stop_paravirtprobe = .;
}
. = ALIGN(4096);
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
__nosave_begin = .;
*(.data.nosave)
. = ALIGN(4096);
__nosave_end = .;
}
. = ALIGN(4096);
.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
*(.data.idt)
}
. = ALIGN(32);
.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
*(.data.cacheline_aligned)
}
/* rarely changed data like cpu maps */
. = ALIGN(32);
.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
*(.data.read_mostly)
_edata = .; /* End of data section */
}
. = ALIGN(THREAD_SIZE); /* init_task */
.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
*(.data.init_task)
}
/* might get freed after init */
. = ALIGN(4096);
.smp_altinstructions : AT(ADDR(.smp_altinstructions) - LOAD_OFFSET) {
__smp_alt_begin = .;
__smp_alt_instructions = .;
*(.smp_altinstructions)
__smp_alt_instructions_end = .;
}
. = ALIGN(4);
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
__smp_locks = .;
*(.smp_locks)
__smp_locks_end = .;
}
.smp_altinstr_replacement : AT(ADDR(.smp_altinstr_replacement) - LOAD_OFFSET) {
*(.smp_altinstr_replacement)
__smp_alt_end = .;
}
/* will be freed after init
* Following ALIGN() is required to make sure no other data falls on the
* same page where __smp_alt_end is pointing as that page might be freed
* after boot. Always make sure that ALIGN() directive is present after
* the section which contains __smp_alt_end.
*/
. = ALIGN(4096);
/* will be freed after init */
. = ALIGN(4096); /* Init code and data */
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
__init_begin = .;
_sinittext = .;
*(.init.text)
_einittext = .;
}
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) }
. = ALIGN(16);
.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
__setup_start = .;
*(.init.setup)
__setup_end = .;
}
.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
__initcall_start = .;
INITCALLS
__initcall_end = .;
}
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
}
SECURITY_INIT
. = ALIGN(4);
.altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
__alt_instructions = .;
*(.altinstructions)
__alt_instructions_end = .;
}
.altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
*(.altinstr_replacement)
}
. = ALIGN(4);
.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
__start_parainstructions = .;
*(.parainstructions)
__stop_parainstructions = .;
}
/* .exit.text is discard at runtime, not link time, to deal with references
from .altinstructions and .eh_frame */
.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) }
.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) }
#if defined(CONFIG_BLK_DEV_INITRD)
. = ALIGN(4096);
.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
#endif
. = ALIGN(L1_CACHE_BYTES);
.data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
__per_cpu_start = .;
*(.data.percpu)
__per_cpu_end = .;
}
. = ALIGN(4096);
/* freed after init ends here */
.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
__init_end = .;
__bss_start = .; /* BSS */
*(.bss.page_aligned)
*(.bss)
. = ALIGN(4);
__bss_stop = .;
_end = . ;
/* This is where the kernel creates the early boot page tables */
. = ALIGN(4096);
pg0 = . ;
}
/* Sections to be discarded */
/DISCARD/ : {
*(.exitcall.exit)
}
STABS_DEBUG
DWARF_DEBUG
NOTES
}