linux/drivers/mfd/tps6105x.c
Uwe Kleine-König 9816d85923 mfd: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230515182752.10050-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-15 09:19:37 +01:00

232 lines
5.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Core driver for TPS61050/61052 boost converters, used for while LED
* driving, audio power amplification, white LED flash, and generic
* boost conversion. Additionally it provides a 1-bit GPIO pin (out or in)
* and a flash synchronization pin to synchronize flash events when used as
* flashgun.
*
* Copyright (C) 2011 ST-Ericsson SA
* Written on behalf of Linaro for ST-Ericsson
*
* Author: Linus Walleij <linus.walleij@linaro.org>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/gpio.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps6105x.h>
static struct regmap_config tps6105x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = TPS6105X_REG_3,
};
static int tps6105x_startup(struct tps6105x *tps6105x)
{
int ret;
unsigned int regval;
ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, &regval);
if (ret)
return ret;
switch (regval >> TPS6105X_REG0_MODE_SHIFT) {
case TPS6105X_REG0_MODE_SHUTDOWN:
dev_info(&tps6105x->client->dev,
"TPS6105x found in SHUTDOWN mode\n");
break;
case TPS6105X_REG0_MODE_TORCH:
dev_info(&tps6105x->client->dev,
"TPS6105x found in TORCH mode\n");
break;
case TPS6105X_REG0_MODE_TORCH_FLASH:
dev_info(&tps6105x->client->dev,
"TPS6105x found in FLASH mode\n");
break;
case TPS6105X_REG0_MODE_VOLTAGE:
dev_info(&tps6105x->client->dev,
"TPS6105x found in VOLTAGE mode\n");
break;
default:
break;
}
return ret;
}
/*
* MFD cells - we always have a GPIO cell and we have one cell
* which is selected operation mode.
*/
static struct mfd_cell tps6105x_gpio_cell = {
.name = "tps6105x-gpio",
};
static struct mfd_cell tps6105x_leds_cell = {
.name = "tps6105x-leds",
};
static struct mfd_cell tps6105x_flash_cell = {
.name = "tps6105x-flash",
};
static struct mfd_cell tps6105x_regulator_cell = {
.name = "tps6105x-regulator",
};
static int tps6105x_add_device(struct tps6105x *tps6105x,
struct mfd_cell *cell)
{
cell->platform_data = tps6105x;
cell->pdata_size = sizeof(*tps6105x);
return mfd_add_devices(&tps6105x->client->dev,
PLATFORM_DEVID_AUTO, cell, 1, NULL, 0, NULL);
}
static struct tps6105x_platform_data *tps6105x_parse_dt(struct device *dev)
{
struct device_node *np = dev->of_node;
struct tps6105x_platform_data *pdata;
struct device_node *child;
if (!np)
return ERR_PTR(-EINVAL);
if (of_get_available_child_count(np) > 1) {
dev_err(dev, "cannot support multiple operational modes");
return ERR_PTR(-EINVAL);
}
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return ERR_PTR(-ENOMEM);
pdata->mode = TPS6105X_MODE_SHUTDOWN;
for_each_available_child_of_node(np, child) {
if (child->name && !of_node_cmp(child->name, "regulator"))
pdata->mode = TPS6105X_MODE_VOLTAGE;
else if (child->name && !of_node_cmp(child->name, "led"))
pdata->mode = TPS6105X_MODE_TORCH;
}
return pdata;
}
static int tps6105x_probe(struct i2c_client *client)
{
struct tps6105x *tps6105x;
struct tps6105x_platform_data *pdata;
int ret;
pdata = dev_get_platdata(&client->dev);
if (!pdata)
pdata = tps6105x_parse_dt(&client->dev);
if (IS_ERR(pdata)) {
dev_err(&client->dev, "No platform data or DT found");
return PTR_ERR(pdata);
}
tps6105x = devm_kmalloc(&client->dev, sizeof(*tps6105x), GFP_KERNEL);
if (!tps6105x)
return -ENOMEM;
tps6105x->regmap = devm_regmap_init_i2c(client, &tps6105x_regmap_config);
if (IS_ERR(tps6105x->regmap))
return PTR_ERR(tps6105x->regmap);
i2c_set_clientdata(client, tps6105x);
tps6105x->client = client;
tps6105x->pdata = pdata;
ret = tps6105x_startup(tps6105x);
if (ret) {
dev_err(&client->dev, "chip initialization failed\n");
return ret;
}
ret = tps6105x_add_device(tps6105x, &tps6105x_gpio_cell);
if (ret)
return ret;
switch (pdata->mode) {
case TPS6105X_MODE_SHUTDOWN:
dev_info(&client->dev,
"present, not used for anything, only GPIO\n");
break;
case TPS6105X_MODE_TORCH:
ret = tps6105x_add_device(tps6105x, &tps6105x_leds_cell);
break;
case TPS6105X_MODE_TORCH_FLASH:
ret = tps6105x_add_device(tps6105x, &tps6105x_flash_cell);
break;
case TPS6105X_MODE_VOLTAGE:
ret = tps6105x_add_device(tps6105x, &tps6105x_regulator_cell);
break;
default:
dev_warn(&client->dev, "invalid mode: %d\n", pdata->mode);
break;
}
if (ret)
mfd_remove_devices(&client->dev);
return ret;
}
static void tps6105x_remove(struct i2c_client *client)
{
struct tps6105x *tps6105x = i2c_get_clientdata(client);
mfd_remove_devices(&client->dev);
/* Put chip in shutdown mode */
regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
TPS6105X_REG0_MODE_MASK,
TPS6105X_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT);
}
static const struct i2c_device_id tps6105x_id[] = {
{ "tps61050", 0 },
{ "tps61052", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tps6105x_id);
static const struct of_device_id tps6105x_of_match[] = {
{ .compatible = "ti,tps61050" },
{ .compatible = "ti,tps61052" },
{ },
};
MODULE_DEVICE_TABLE(of, tps6105x_of_match);
static struct i2c_driver tps6105x_driver = {
.driver = {
.name = "tps6105x",
.of_match_table = tps6105x_of_match,
},
.probe = tps6105x_probe,
.remove = tps6105x_remove,
.id_table = tps6105x_id,
};
static int __init tps6105x_init(void)
{
return i2c_add_driver(&tps6105x_driver);
}
subsys_initcall(tps6105x_init);
static void __exit tps6105x_exit(void)
{
i2c_del_driver(&tps6105x_driver);
}
module_exit(tps6105x_exit);
MODULE_AUTHOR("Linus Walleij");
MODULE_DESCRIPTION("TPS6105x White LED Boost Converter Driver");
MODULE_LICENSE("GPL v2");