linux/drivers/regulator/Kconfig
Mark Brown e4ee831f94 regulator: Add WM831x DC-DC buck convertor support
The WM831x series of devices all have 3 DC-DC buck convertors. This
driver implements software control for these regulators via the
regulator API.  Use with split hardware/software control of individual
regulators is not supported, though regulators not controlled by
software may be controlled via the hardware control interfaces.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:47:06 +02:00

135 lines
4.1 KiB
Plaintext

menuconfig REGULATOR
bool "Voltage and Current Regulator Support"
default n
help
Generic Voltage and Current Regulator support.
This framework is designed to provide a generic interface to voltage
and current regulators within the Linux kernel. It's intended to
provide voltage and current control to client or consumer drivers and
also provide status information to user space applications through a
sysfs interface.
The intention is to allow systems to dynamically control regulator
output in order to save power and prolong battery life. This applies
to both voltage regulators (where voltage output is controllable) and
current sinks (where current output is controllable).
This framework safely compiles out if not selected so that client
drivers can still be used in systems with no software controllable
regulators.
If unsure, say no.
if REGULATOR
config REGULATOR_DEBUG
bool "Regulator debug support"
help
Say yes here to enable debugging support.
config REGULATOR_FIXED_VOLTAGE
tristate "Fixed voltage regulator support"
default n
help
This driver provides support for fixed voltage regulators,
useful for systems which use a combination of software
managed regulators and simple non-configurable regulators.
config REGULATOR_VIRTUAL_CONSUMER
tristate "Virtual regulator consumer support"
default n
help
This driver provides a virtual consumer for the voltage and
current regulator API which provides sysfs controls for
configuring the supplies requested. This is mainly useful
for test purposes.
If unsure, say no.
config REGULATOR_USERSPACE_CONSUMER
tristate "Userspace regulator consumer support"
default n
help
There are some classes of devices that are controlled entirely
from user space. Usersapce consumer driver provides ability to
control power supplies for such devices.
If unsure, say no.
config REGULATOR_BQ24022
tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
default n
help
This driver controls a TI bq24022 Charger attached via
GPIOs. The provided current regulator can enable/disable
charging select between 100 mA and 500 mA charging current
limit.
config REGULATOR_MAX1586
tristate "Maxim 1586/1587 voltage regulator"
depends on I2C
default n
help
This driver controls a Maxim 1586 or 1587 voltage output
regulator via I2C bus. The provided regulator is suitable
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
config REGULATOR_TWL4030
bool "TI TWL4030/TWL5030/TPS695x0 PMIC"
depends on TWL4030_CORE
help
This driver supports the voltage regulators provided by
this family of companion chips.
config REGULATOR_WM831X
tristate "Wolfson Microelcronics WM831x PMIC regulators"
depends on MFD_WM831X
help
Support the voltage and current regulators of the WM831x series
of PMIC devices.
config REGULATOR_WM8350
tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC"
depends on MFD_WM8350
help
This driver provides support for the voltage and current regulators
of the WM8350 AudioPlus PMIC.
config REGULATOR_WM8400
tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC"
depends on MFD_WM8400
help
This driver provides support for the voltage regulators of the
WM8400 AudioPlus PMIC.
config REGULATOR_DA903X
tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC"
depends on PMIC_DA903X
help
Say y here to support the BUCKs and LDOs regulators found on
Dialog Semiconductor DA9030/DA9034 PMIC.
config REGULATOR_PCF50633
tristate "PCF50633 regulator driver"
depends on MFD_PCF50633
help
Say Y here to support the voltage regulators and convertors
on PCF50633
config REGULATOR_LP3971
tristate "National Semiconductors LP3971 PMIC regulator driver"
depends on I2C
help
Say Y here to support the voltage regulators and convertors
on National Semiconductors LP3971 PMIC
config REGULATOR_PCAP
tristate "PCAP2 regulator driver"
depends on EZX_PCAP
help
This driver provides support for the voltage regulators of the
PCAP2 PMIC.
endif