linux/drivers/usb/dwc3/Kconfig
Ivan T. Ivanov d9152161b4 usb: dwc3: Add Qualcomm DWC3 glue layer driver
DWC3 glue layer is hardware layer around Synopsys DesignWare
USB3 core. Its purpose is to supply Synopsys IP with required
clocks, voltages and interface it with the rest of the SoC.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-12 15:43:48 -05:00

121 lines
3.3 KiB
Plaintext

config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
depends on (USB || USB_GADGET) && HAS_DMA
select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
help
Say Y or M here if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
If you choose to build this driver is a dynamically linked
module, the module will be called dwc3.ko.
if USB_DWC3
choice
bool "DWC3 Mode Selection"
default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
default USB_DWC3_HOST if (USB && !USB_GADGET)
default USB_DWC3_GADGET if (!USB && USB_GADGET)
config USB_DWC3_HOST
bool "Host only mode"
depends on USB=y || USB=USB_DWC3
help
Select this when you want to use DWC3 in host mode only,
thereby the gadget feature will be regressed.
config USB_DWC3_GADGET
bool "Gadget only mode"
depends on USB_GADGET=y || USB_GADGET=USB_DWC3
help
Select this when you want to use DWC3 in gadget mode only,
thereby the host feature will be regressed.
config USB_DWC3_DUAL_ROLE
bool "Dual Role mode"
depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
help
This is the default mode of working of DWC3 controller where
both host and gadget features are enabled.
endchoice
comment "Platform Glue Driver Support"
config USB_DWC3_OMAP
tristate "Texas Instruments OMAP5 and similar Platforms"
depends on EXTCON && (ARCH_OMAP2PLUS || COMPILE_TEST)
depends on OF
default USB_DWC3
help
Some platforms from Texas Instruments like OMAP5, DRA7xxx and
AM437x use this IP for USB2/3 functionality.
Say 'Y' or 'M' here if you have one such device
config USB_DWC3_EXYNOS
tristate "Samsung Exynos Platform"
depends on ARCH_EXYNOS || COMPILE_TEST
default USB_DWC3
help
Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
say 'Y' or 'M' if you have one such device.
config USB_DWC3_PCI
tristate "PCIe-based Platforms"
depends on PCI
default USB_DWC3
help
If you're using the DesignWare Core IP with a PCIe, please say
'Y' or 'M' here.
One such PCIe-based platform is Synopsys' PCIe HAPS model of
this IP.
config USB_DWC3_KEYSTONE
tristate "Texas Instruments Keystone2 Platforms"
depends on ARCH_KEYSTONE || COMPILE_TEST
default USB_DWC3
help
Support of USB2/3 functionality in TI Keystone2 platforms.
Say 'Y' or 'M' here if you have one such device
config USB_DWC3_ST
tristate "STMicroelectronics Platforms"
depends on ARCH_STI && OF
default USB_DWC3
help
STMicroelectronics SoCs with one DesignWare Core USB3 IP
inside (i.e. STiH407).
Say 'Y' or 'M' if you have one such device.
config USB_DWC3_QCOM
tristate "Qualcomm Platforms"
depends on ARCH_QCOM || COMPILE_TEST
default USB_DWC3
help
Recent Qualcomm SoCs ship with one DesignWare Core USB3 IP inside,
say 'Y' or 'M' if you have one such device.
comment "Debugging features"
config USB_DWC3_DEBUG
bool "Enable Debugging Messages"
help
Say Y here to enable debugging messages on DWC3 Driver.
config USB_DWC3_VERBOSE
bool "Enable Verbose Debugging Messages"
depends on USB_DWC3_DEBUG
help
Say Y here to enable verbose debugging messages on DWC3 Driver.
config DWC3_HOST_USB3_LPM_ENABLE
bool "Enable USB3 LPM Capability"
depends on USB_DWC3_HOST=y || USB_DWC3_DUAL_ROLE=y
default n
help
Select this when you want to enable USB3 LPM with dwc3 xhci host.
endif