linux/drivers/media/video/davinci/vpif.c
Uwe Kleine-König 0b0a860fec V4L/DVB (13607): vpif: move vpif_remove to .devexit
The function vpif_remove is used only wrapped by __devexit_p so define
it using __devexit.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:37 -02:00

297 lines
8.2 KiB
C

/*
* vpif - DM646x Video Port Interface driver
* VPIF is a receiver and transmitter for video data. It has two channels(0, 1)
* that receiveing video byte stream and two channels(2, 3) for video output.
* The hardware supports SDTV, HDTV formats, raw data capture.
* Currently, the driver supports NTSC and PAL standards.
*
* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed .as is. WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include "vpif.h"
MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver");
MODULE_LICENSE("GPL");
#define VPIF_CH0_MAX_MODES (22)
#define VPIF_CH1_MAX_MODES (02)
#define VPIF_CH2_MAX_MODES (15)
#define VPIF_CH3_MAX_MODES (02)
static resource_size_t res_len;
static struct resource *res;
spinlock_t vpif_lock;
void __iomem *vpif_base;
static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val)
{
if (val)
vpif_set_bit(reg, bit);
else
vpif_clr_bit(reg, bit);
}
/* This structure is used to keep track of VPIF size register's offsets */
struct vpif_registers {
u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl;
u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt;
u32 vanc1_size, width_mask, len_mask;
u8 max_modes;
};
static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = {
/* Channel0 */
{
VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01,
VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL,
VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
VPIF_CH0_MAX_MODES,
},
/* Channel1 */
{
VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01,
VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL,
VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
VPIF_CH1_MAX_MODES,
},
/* Channel2 */
{
VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01,
VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL,
VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE,
VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF,
VPIF_CH2_MAX_MODES
},
/* Channel3 */
{
VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01,
VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL,
VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE,
VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF,
VPIF_CH3_MAX_MODES
},
};
/* vpif_set_mode_info:
* This function is used to set horizontal and vertical config parameters
* As per the standard in the channel, configure the values of L1, L3,
* L5, L7 L9, L11 in VPIF Register , also write width and height
*/
static void vpif_set_mode_info(const struct vpif_channel_config_params *config,
u8 channel_id, u8 config_channel_id)
{
u32 value;
value = (config->eav2sav & vpifregs[config_channel_id].width_mask);
value <<= VPIF_CH_LEN_SHIFT;
value |= (config->sav2eav & vpifregs[config_channel_id].width_mask);
regw(value, vpifregs[channel_id].h_cfg);
value = (config->l1 & vpifregs[config_channel_id].len_mask);
value <<= VPIF_CH_LEN_SHIFT;
value |= (config->l3 & vpifregs[config_channel_id].len_mask);
regw(value, vpifregs[channel_id].v_cfg_00);
value = (config->l5 & vpifregs[config_channel_id].len_mask);
value <<= VPIF_CH_LEN_SHIFT;
value |= (config->l7 & vpifregs[config_channel_id].len_mask);
regw(value, vpifregs[channel_id].v_cfg_01);
value = (config->l9 & vpifregs[config_channel_id].len_mask);
value <<= VPIF_CH_LEN_SHIFT;
value |= (config->l11 & vpifregs[config_channel_id].len_mask);
regw(value, vpifregs[channel_id].v_cfg_02);
value = (config->vsize & vpifregs[config_channel_id].len_mask);
regw(value, vpifregs[channel_id].v_cfg);
}
/* config_vpif_params
* Function to set the parameters of a channel
* Mainly modifies the channel ciontrol register
* It sets frame format, yc mux mode
*/
static void config_vpif_params(struct vpif_params *vpifparams,
u8 channel_id, u8 found)
{
const struct vpif_channel_config_params *config = &vpifparams->std_info;
u32 value, ch_nip, reg;
u8 start, end;
int i;
start = channel_id;
end = channel_id + found;
for (i = start; i < end; i++) {
reg = vpifregs[i].ch_ctrl;
if (channel_id < 2)
ch_nip = VPIF_CAPTURE_CH_NIP;
else
ch_nip = VPIF_DISPLAY_CH_NIP;
vpif_wr_bit(reg, ch_nip, config->frm_fmt);
vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode);
vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT,
vpifparams->video_params.storage_mode);
/* Set raster scanning SDR Format */
vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT);
vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format);
if (channel_id > 1) /* Set the Pixel enable bit */
vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT);
else if (config->capture_format) {
/* Set the polarity of various pins */
vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT,
vpifparams->iface.fid_pol);
vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT,
vpifparams->iface.vd_pol);
vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT,
vpifparams->iface.hd_pol);
value = regr(reg);
/* Set data width */
value &= ((~(unsigned int)(0x3)) <<
VPIF_CH_DATA_WIDTH_BIT);
value |= ((vpifparams->params.data_sz) <<
VPIF_CH_DATA_WIDTH_BIT);
regw(value, reg);
}
/* Write the pitch in the driver */
regw((vpifparams->video_params.hpitch),
vpifregs[i].line_offset);
}
}
/* vpif_set_video_params
* This function is used to set video parameters in VPIF register
*/
int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id)
{
const struct vpif_channel_config_params *config = &vpifparams->std_info;
int found = 1;
vpif_set_mode_info(config, channel_id, channel_id);
if (!config->ycmux_mode) {
/* YC are on separate channels (HDTV formats) */
vpif_set_mode_info(config, channel_id + 1, channel_id);
found = 2;
}
config_vpif_params(vpifparams, channel_id, found);
regw(0x80, VPIF_REQ_SIZE);
regw(0x01, VPIF_EMULATION_CTRL);
return found;
}
EXPORT_SYMBOL(vpif_set_video_params);
void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams,
u8 channel_id)
{
u32 value;
value = 0x3F8 & (vbiparams->hstart0);
value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16);
regw(value, vpifregs[channel_id].vanc0_strt);
value = 0x3F8 & (vbiparams->hstart1);
value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16);
regw(value, vpifregs[channel_id].vanc1_strt);
value = 0x3F8 & (vbiparams->hsize0);
value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16);
regw(value, vpifregs[channel_id].vanc0_size);
value = 0x3F8 & (vbiparams->hsize1);
value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16);
regw(value, vpifregs[channel_id].vanc1_size);
}
EXPORT_SYMBOL(vpif_set_vbi_display_params);
int vpif_channel_getfid(u8 channel_id)
{
return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK)
>> VPIF_CH_FID_SHIFT;
}
EXPORT_SYMBOL(vpif_channel_getfid);
static int __init vpif_probe(struct platform_device *pdev)
{
int status = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENOENT;
res_len = res->end - res->start + 1;
res = request_mem_region(res->start, res_len, res->name);
if (!res)
return -EBUSY;
vpif_base = ioremap(res->start, res_len);
if (!vpif_base) {
status = -EBUSY;
goto fail;
}
spin_lock_init(&vpif_lock);
dev_info(&pdev->dev, "vpif probe success\n");
return 0;
fail:
release_mem_region(res->start, res_len);
return status;
}
static int __devexit vpif_remove(struct platform_device *pdev)
{
iounmap(vpif_base);
release_mem_region(res->start, res_len);
return 0;
}
static struct platform_driver vpif_driver = {
.driver = {
.name = "vpif",
.owner = THIS_MODULE,
},
.remove = __devexit_p(vpif_remove),
.probe = vpif_probe,
};
static void vpif_exit(void)
{
platform_driver_unregister(&vpif_driver);
}
static int __init vpif_init(void)
{
return platform_driver_register(&vpif_driver);
}
subsys_initcall(vpif_init);
module_exit(vpif_exit);