Jerome Brunet e39f9dd820 pinctrl: meson: fix pinconf bias disable ... If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set() with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will force a pull-down bias on the pin. Instead of the pull type register bank, the driver should access the pull enable register bank. Fixes: 6ac7309511 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>		2018-11-05 09:33:22 +01:00
..
Kconfig	pinctrl: meson-g12a: add pinctrl driver support	2018-08-29 10:34:53 +02:00
Makefile	pinctrl: meson-g12a: add pinctrl driver support	2018-08-29 10:34:53 +02:00
pinctrl-meson-axg-pmx.c	pinctrl: meson-axg: Introduce a pinctrl pinmux ops for Meson-AXG SoC	2017-11-30 14:28:16 +01:00
pinctrl-meson-axg-pmx.h	pinctrl: meson-axg: Introduce a pinctrl pinmux ops for Meson-AXG SoC	2017-11-30 14:28:16 +01:00
pinctrl-meson-axg.c	pinctrl: meson: add gen_clk pins	2018-07-16 14:46:11 +02:00
pinctrl-meson-g12a.c	pinctrl: meson-g12a: add pinctrl driver support	2018-08-29 10:34:53 +02:00
pinctrl-meson-gxbb.c	pinctrl: meson: add gen_clk pins	2018-07-16 14:46:11 +02:00
pinctrl-meson-gxl.c	pinctrl: nand: meson-gxl: fix missing data pins	2018-05-16 16:23:57 +02:00
pinctrl-meson.c	pinctrl: meson: fix pinconf bias disable	2018-11-05 09:33:22 +01:00
pinctrl-meson.h	pinctrl: Include <linux/gpio/driver.h> nothing else	2018-09-14 15:10:57 +02:00
pinctrl-meson8-pmx.c	pinctrl: meson: rework pinmux ops	2017-10-16 23:14:10 +02:00
pinctrl-meson8-pmx.h	pinctrl: meson: rework pinmux ops	2017-10-16 23:14:10 +02:00
pinctrl-meson8.c	pinctrl: meson: meson8: add the RGMII RXD2/RXD3 and TXD2/TXD3 signals	2018-05-02 14:36:08 +02:00
pinctrl-meson8b.c	pinctrl: meson: meson8b: fix requesting GPIOs greater than GPIOZ_3	2018-03-02 10:46:42 +01:00