linux/arch/arm/mach-omap1/Makefile
Suman Anna c869c75c16 mailbox/omap: move the OMAP mailbox framework to drivers
The mailbox hardware (in OMAP) uses a queued mailbox interrupt
mechanism that provides a communication channel between processors
through a set of registers and their associated interrupt signals
by sending and receiving messages.

The OMAP mailbox framework/driver code is moved to be under
drivers/mailbox, in preparation for adapting to a common mailbox
driver framework. This allows the build for OMAP mailbox to be
enabled (it was disabled during the multi-platform support).

As part of the migration from plat and mach code:
- Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers.
- mailbox.h under plat-omap/plat/include has been split into a public
  and private header files. The public header has only the API related
  functions and types.
- The module name mailbox.ko from plat-omap is changed to
  omap-mailbox.ko
- The module name mailbox_mach.ko from mach-omapX is changed as
    mailbox_omap1.ko for OMAP1
    mailbox_omap2.ko for OMAP2+

Cc: Tony Lindgren <tony@atomide.com>
[gregkh@linuxfoundation.org: ack for staging part]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
2013-06-11 11:41:51 -05:00

64 lines
1.9 KiB
Makefile

#
# Makefile for the linux kernel.
#
# Common support
obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
serial.o devices.o dma.o fb.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
endif
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# OCPI interconnect support for 1710, 1610 and 5912
obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y)
led-y := leds.o
usb-fs-$(CONFIG_USB) := usb.o
obj-y += $(usb-fs-m) $(usb-fs-y)
# Specific board support
obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o \
board-nand.o
obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o board-nand.o
obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o board-nand.o
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \
board-nand.o
obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o
obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o
obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o
obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o ams-delta-fiq.o \
ams-delta-fiq-handler.o
obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o
obj-$(CONFIG_MACH_HERALD) += board-htcherald.o
ifeq ($(CONFIG_ARCH_OMAP15XX),y)
# Innovator-1510 FPGA
obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o
endif
# GPIO
obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
ifneq ($(CONFIG_FB_OMAP),)
obj-y += lcd_dma.o
endif