linux/arch/x86/kernel/apic/numaq_32.c
Rusty Russell 73e907de7d cpumask: remove x86 cpumask_t uses.
Impact: cleanup

We are removing cpumask_t in favour of struct cpumask: mainly as a
marker of what code is now CONFIG_CPUMASK_OFFSTACK-safe.

The only non-trivial change here is vector_allocation_domain():
explicitly clear the mask and set the first word, rather than using
assignment.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 14:49:57 +10:30

559 lines
14 KiB
C

/*
* Written by: Patricia Gaughen, IBM Corporation
*
* Copyright (C) 2002, IBM Corp.
* Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <gone@us.ibm.com>
*/
#include <linux/nodemask.h>
#include <linux/topology.h>
#include <linux/bootmem.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/mmzone.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/numa.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <asm/processor.h>
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/numaq.h>
#include <asm/setup.h>
#include <asm/apic.h>
#include <asm/e820.h>
#include <asm/ipi.h>
#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
int found_numaq;
/*
* Have to match translation table entries to main table entries by counter
* hence the mpc_record variable .... can't see a less disgusting way of
* doing this ....
*/
struct mpc_trans {
unsigned char mpc_type;
unsigned char trans_len;
unsigned char trans_type;
unsigned char trans_quad;
unsigned char trans_global;
unsigned char trans_local;
unsigned short trans_reserved;
};
/* x86_quirks member */
static int mpc_record;
static struct mpc_trans *translation_table[MAX_MPC_ENTRY];
int mp_bus_id_to_node[MAX_MP_BUSSES];
int mp_bus_id_to_local[MAX_MP_BUSSES];
int quad_local_to_mp_bus_id[NR_CPUS/4][4];
static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
{
struct eachquadmem *eq = scd->eq + node;
node_set_online(node);
/* Convert to pages */
node_start_pfn[node] =
MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size);
node_end_pfn[node] =
MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
e820_register_active_regions(node, node_start_pfn[node],
node_end_pfn[node]);
memory_present(node, node_start_pfn[node], node_end_pfn[node]);
node_remap_size[node] = node_memmap_size_bytes(node,
node_start_pfn[node],
node_end_pfn[node]);
}
/*
* Function: smp_dump_qct()
*
* Description: gets memory layout from the quad config table. This
* function also updates node_online_map with the nodes (quads) present.
*/
static void __init smp_dump_qct(void)
{
struct sys_cfg_data *scd;
int node;
scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
nodes_clear(node_online_map);
for_each_node(node) {
if (scd->quads_present31_0 & (1 << node))
numaq_register_node(node, scd);
}
}
void __cpuinit numaq_tsc_disable(void)
{
if (!found_numaq)
return;
if (num_online_nodes() > 1) {
printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
setup_clear_cpu_cap(X86_FEATURE_TSC);
}
}
static int __init numaq_pre_time_init(void)
{
numaq_tsc_disable();
return 0;
}
static inline int generate_logical_apicid(int quad, int phys_apicid)
{
return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
}
/* x86_quirks member */
static int mpc_apic_id(struct mpc_cpu *m)
{
int quad = translation_table[mpc_record]->trans_quad;
int logical_apicid = generate_logical_apicid(quad, m->apicid);
printk(KERN_DEBUG
"Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
(m->cpufeature & CPU_MODEL_MASK) >> 4,
m->apicver, quad, logical_apicid);
return logical_apicid;
}
/* x86_quirks member */
static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
{
int quad = translation_table[mpc_record]->trans_quad;
int local = translation_table[mpc_record]->trans_local;
mp_bus_id_to_node[m->busid] = quad;
mp_bus_id_to_local[m->busid] = local;
printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
}
/* x86_quirks member */
static void mpc_oem_pci_bus(struct mpc_bus *m)
{
int quad = translation_table[mpc_record]->trans_quad;
int local = translation_table[mpc_record]->trans_local;
quad_local_to_mp_bus_id[quad][local] = m->busid;
}
static void __init MP_translation_info(struct mpc_trans *m)
{
printk(KERN_INFO
"Translation: record %d, type %d, quad %d, global %d, local %d\n",
mpc_record, m->trans_type, m->trans_quad, m->trans_global,
m->trans_local);
if (mpc_record >= MAX_MPC_ENTRY)
printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
else
translation_table[mpc_record] = m; /* stash this for later */
if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
node_set_online(m->trans_quad);
}
static int __init mpf_checksum(unsigned char *mp, int len)
{
int sum = 0;
while (len--)
sum += *mp++;
return sum & 0xFF;
}
/*
* Read/parse the MPC oem tables
*/
static void __init
smp_read_mpc_oem(struct mpc_oemtable *oemtable, unsigned short oemsize)
{
int count = sizeof(*oemtable); /* the header size */
unsigned char *oemptr = ((unsigned char *)oemtable) + count;
mpc_record = 0;
printk(KERN_INFO
"Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
printk(KERN_WARNING
"SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
oemtable->signature[0], oemtable->signature[1],
oemtable->signature[2], oemtable->signature[3]);
return;
}
if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) {
printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
return;
}
while (count < oemtable->length) {
switch (*oemptr) {
case MP_TRANSLATION:
{
struct mpc_trans *m = (void *)oemptr;
MP_translation_info(m);
oemptr += sizeof(*m);
count += sizeof(*m);
++mpc_record;
break;
}
default:
printk(KERN_WARNING
"Unrecognised OEM table entry type! - %d\n",
(int)*oemptr);
return;
}
}
}
static int __init numaq_setup_ioapic_ids(void)
{
/* so can skip it */
return 1;
}
static struct x86_quirks numaq_x86_quirks __initdata = {
.arch_pre_time_init = numaq_pre_time_init,
.arch_time_init = NULL,
.arch_pre_intr_init = NULL,
.arch_memory_setup = NULL,
.arch_intr_init = NULL,
.arch_trap_init = NULL,
.mach_get_smp_config = NULL,
.mach_find_smp_config = NULL,
.mpc_record = &mpc_record,
.mpc_apic_id = mpc_apic_id,
.mpc_oem_bus_info = mpc_oem_bus_info,
.mpc_oem_pci_bus = mpc_oem_pci_bus,
.smp_read_mpc_oem = smp_read_mpc_oem,
.setup_ioapic_ids = numaq_setup_ioapic_ids,
};
static __init void early_check_numaq(void)
{
/*
* Find possible boot-time SMP configuration:
*/
early_find_smp_config();
/*
* get boot-time SMP configuration:
*/
if (smp_found_config)
early_get_smp_config();
if (found_numaq)
x86_quirks = &numaq_x86_quirks;
}
int __init get_memcfg_numaq(void)
{
early_check_numaq();
if (!found_numaq)
return 0;
smp_dump_qct();
return 1;
}
#define NUMAQ_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
static inline unsigned int numaq_get_apic_id(unsigned long x)
{
return (x >> 24) & 0x0F;
}
static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
{
default_send_IPI_mask_sequence_logical(mask, vector);
}
static inline void numaq_send_IPI_allbutself(int vector)
{
default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
}
static inline void numaq_send_IPI_all(int vector)
{
numaq_send_IPI_mask(cpu_online_mask, vector);
}
#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8)
#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa)
/*
* Because we use NMIs rather than the INIT-STARTUP sequence to
* bootstrap the CPUs, the APIC may be in a weird state. Kick it:
*/
static inline void numaq_smp_callin_clear_local_apic(void)
{
clear_local_APIC();
}
static inline const struct cpumask *numaq_target_cpus(void)
{
return cpu_all_mask;
}
static inline unsigned long
numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
{
return physid_isset(apicid, bitmap);
}
static inline unsigned long numaq_check_apicid_present(int bit)
{
return physid_isset(bit, phys_cpu_present_map);
}
static inline int numaq_apic_id_registered(void)
{
return 1;
}
static inline void numaq_init_apic_ldr(void)
{
/* Already done in NUMA-Q firmware */
}
static inline void numaq_setup_apic_routing(void)
{
printk(KERN_INFO
"Enabling APIC mode: NUMA-Q. Using %d I/O APICs\n",
nr_ioapics);
}
/*
* Skip adding the timer int on secondary nodes, which causes
* a small but painful rift in the time-space continuum.
*/
static inline int numaq_multi_timer_check(int apic, int irq)
{
return apic != 0 && irq == 0;
}
static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
{
/* We don't have a good way to do this yet - hack */
return physids_promote(0xFUL);
}
static inline int numaq_cpu_to_logical_apicid(int cpu)
{
if (cpu >= nr_cpu_ids)
return BAD_APICID;
return cpu_2_logical_apicid[cpu];
}
/*
* Supporting over 60 cpus on NUMA-Q requires a locality-dependent
* cpu to APIC ID relation to properly interact with the intelligent
* mode of the cluster controller.
*/
static inline int numaq_cpu_present_to_apicid(int mps_cpu)
{
if (mps_cpu < 60)
return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
else
return BAD_APICID;
}
static inline int numaq_apicid_to_node(int logical_apicid)
{
return logical_apicid >> 4;
}
static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
{
int node = numaq_apicid_to_node(logical_apicid);
int cpu = __ffs(logical_apicid & 0xf);
return physid_mask_of_physid(cpu + 4*node);
}
/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;
static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
{
return 1;
}
/*
* We use physical apicids here, not logical, so just return the default
* physical broadcast to stop people from breaking us
*/
static unsigned int numaq_cpu_mask_to_apicid(const struct cpumask *cpumask)
{
return 0x0F;
}
static inline unsigned int
numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
const struct cpumask *andmask)
{
return 0x0F;
}
/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
{
return cpuid_apic >> index_msb;
}
static int
numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
{
if (strncmp(oem, "IBM NUMA", 8))
printk(KERN_ERR "Warning! Not a NUMA-Q system!\n");
else
found_numaq = 1;
return found_numaq;
}
static int probe_numaq(void)
{
/* already know from get_memcfg_numaq() */
return found_numaq;
}
static void numaq_vector_allocation_domain(int cpu, struct cpumask *retmask)
{
/* Careful. Some cpus do not strictly honor the set of cpus
* specified in the interrupt destination when using lowest
* priority interrupt delivery mode.
*
* In particular there was a hyperthreading cpu observed to
* deliver interrupts to the wrong hyperthread when only one
* hyperthread was specified in the interrupt desitination.
*/
cpumask_clear(retmask);
cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
}
static void numaq_setup_portio_remap(void)
{
int num_quads = num_online_nodes();
if (num_quads <= 1)
return;
printk(KERN_INFO
"Remapping cross-quad port I/O for %d quads\n", num_quads);
xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
printk(KERN_INFO
"xquad_portio vaddr 0x%08lx, len %08lx\n",
(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
}
struct apic apic_numaq = {
.name = "NUMAQ",
.probe = probe_numaq,
.acpi_madt_oem_check = NULL,
.apic_id_registered = numaq_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio,
/* physical delivery on LOCAL quad: */
.irq_dest_mode = 0,
.target_cpus = numaq_target_cpus,
.disable_esr = 1,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = numaq_check_apicid_used,
.check_apicid_present = numaq_check_apicid_present,
.vector_allocation_domain = numaq_vector_allocation_domain,
.init_apic_ldr = numaq_init_apic_ldr,
.ioapic_phys_id_map = numaq_ioapic_phys_id_map,
.setup_apic_routing = numaq_setup_apic_routing,
.multi_timer_check = numaq_multi_timer_check,
.apicid_to_node = numaq_apicid_to_node,
.cpu_to_logical_apicid = numaq_cpu_to_logical_apicid,
.cpu_present_to_apicid = numaq_cpu_present_to_apicid,
.apicid_to_cpu_present = numaq_apicid_to_cpu_present,
.setup_portio_remap = numaq_setup_portio_remap,
.check_phys_apicid_present = numaq_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = numaq_phys_pkg_id,
.mps_oem_check = numaq_mps_oem_check,
.get_apic_id = numaq_get_apic_id,
.set_apic_id = NULL,
.apic_id_mask = 0x0F << 24,
.cpu_mask_to_apicid = numaq_cpu_mask_to_apicid,
.cpu_mask_to_apicid_and = numaq_cpu_mask_to_apicid_and,
.send_IPI_mask = numaq_send_IPI_mask,
.send_IPI_mask_allbutself = NULL,
.send_IPI_allbutself = numaq_send_IPI_allbutself,
.send_IPI_all = numaq_send_IPI_all,
.send_IPI_self = default_send_IPI_self,
.wakeup_secondary_cpu = wakeup_secondary_cpu_via_nmi,
.trampoline_phys_low = NUMAQ_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = NUMAQ_TRAMPOLINE_PHYS_HIGH,
/* We don't do anything here because we use NMI's to boot instead */
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = numaq_smp_callin_clear_local_apic,
.inquire_remote_apic = NULL,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
};