linux/drivers/input/touchscreen/fujitsu_ts.c
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00

174 lines
3.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Fujitsu serial touchscreen driver
*
* Copyright (c) Dmitry Torokhov <dtor@mail.ru>
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#define DRIVER_DESC "Fujitsu serial touchscreen driver"
MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
#define FUJITSU_LENGTH 5
/*
* Per-touchscreen data.
*/
struct fujitsu {
struct input_dev *dev;
struct serio *serio;
int idx;
unsigned char data[FUJITSU_LENGTH];
char phys[32];
};
/*
* Decode serial data (5 bytes per packet)
* First byte
* 1 C 0 0 R S S S
* Where C is 1 while in calibration mode (which we don't use)
* R is 1 when no coordinate corection was done.
* S are button state
*/
static irqreturn_t fujitsu_interrupt(struct serio *serio,
unsigned char data, unsigned int flags)
{
struct fujitsu *fujitsu = serio_get_drvdata(serio);
struct input_dev *dev = fujitsu->dev;
if (fujitsu->idx == 0) {
/* resync skip until start of frame */
if ((data & 0xf0) != 0x80)
return IRQ_HANDLED;
} else {
/* resync skip garbage */
if (data & 0x80) {
fujitsu->idx = 0;
return IRQ_HANDLED;
}
}
fujitsu->data[fujitsu->idx++] = data;
if (fujitsu->idx == FUJITSU_LENGTH) {
input_report_abs(dev, ABS_X,
(fujitsu->data[2] << 7) | fujitsu->data[1]);
input_report_abs(dev, ABS_Y,
(fujitsu->data[4] << 7) | fujitsu->data[3]);
input_report_key(dev, BTN_TOUCH,
(fujitsu->data[0] & 0x03) != 2);
input_sync(dev);
fujitsu->idx = 0;
}
return IRQ_HANDLED;
}
/*
* fujitsu_disconnect() is the opposite of fujitsu_connect()
*/
static void fujitsu_disconnect(struct serio *serio)
{
struct fujitsu *fujitsu = serio_get_drvdata(serio);
input_get_device(fujitsu->dev);
input_unregister_device(fujitsu->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
input_put_device(fujitsu->dev);
kfree(fujitsu);
}
/*
* fujitsu_connect() is the routine that is called when someone adds a
* new serio device that supports the Fujitsu protocol and registers it
* as input device.
*/
static int fujitsu_connect(struct serio *serio, struct serio_driver *drv)
{
struct fujitsu *fujitsu;
struct input_dev *input_dev;
int err;
fujitsu = kzalloc(sizeof(struct fujitsu), GFP_KERNEL);
input_dev = input_allocate_device();
if (!fujitsu || !input_dev) {
err = -ENOMEM;
goto fail1;
}
fujitsu->serio = serio;
fujitsu->dev = input_dev;
snprintf(fujitsu->phys, sizeof(fujitsu->phys),
"%s/input0", serio->phys);
input_dev->name = "Fujitsu Serial Touchscreen";
input_dev->phys = fujitsu->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_FUJITSU;
input_dev->id.product = 0;
input_dev->id.version = 0x0100;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(input_dev, ABS_X, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Y, 0, 4096, 0, 0);
serio_set_drvdata(serio, fujitsu);
err = serio_open(serio, drv);
if (err)
goto fail2;
err = input_register_device(fujitsu->dev);
if (err)
goto fail3;
return 0;
fail3:
serio_close(serio);
fail2:
serio_set_drvdata(serio, NULL);
fail1:
input_free_device(input_dev);
kfree(fujitsu);
return err;
}
/*
* The serio driver structure.
*/
static const struct serio_device_id fujitsu_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_FUJITSU,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, fujitsu_serio_ids);
static struct serio_driver fujitsu_drv = {
.driver = {
.name = "fujitsu_ts",
},
.description = DRIVER_DESC,
.id_table = fujitsu_serio_ids,
.interrupt = fujitsu_interrupt,
.connect = fujitsu_connect,
.disconnect = fujitsu_disconnect,
};
module_serio_driver(fujitsu_drv);