mirror of
https://github.com/torvalds/linux
synced 2024-10-21 10:49:43 +00:00
e10db1f00a
This patch just adds the DT support to gpmi-nand. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
34 lines
1 KiB
Plaintext
34 lines
1 KiB
Plaintext
* Freescale General-Purpose Media Interface (GPMI)
|
|
|
|
The GPMI nand controller provides an interface to control the
|
|
NAND flash chips. We support only one NAND chip now.
|
|
|
|
Required properties:
|
|
- compatible : should be "fsl,<chip>-gpmi-nand"
|
|
- reg : should contain registers location and length for gpmi and bch.
|
|
- reg-names: Should contain the reg names "gpmi-nand" and "bch"
|
|
- interrupts : The first is the DMA interrupt number for GPMI.
|
|
The second is the BCH interrupt number.
|
|
- interrupt-names : The interrupt names "gpmi-dma", "bch";
|
|
- fsl,gpmi-dma-channel : Should contain the dma channel it uses.
|
|
|
|
The device tree may optionally contain sub-nodes describing partitions of the
|
|
address space. See partition.txt for more detail.
|
|
|
|
Examples:
|
|
|
|
gpmi-nand@8000c000 {
|
|
compatible = "fsl,imx28-gpmi-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x8000c000 2000>, <0x8000a000 2000>;
|
|
reg-names = "gpmi-nand", "bch";
|
|
interrupts = <88>, <41>;
|
|
interrupt-names = "gpmi-dma", "bch";
|
|
fsl,gpmi-dma-channel = <4>;
|
|
|
|
partition@0 {
|
|
...
|
|
};
|
|
};
|