linux/arch/arm/boot/dts/sama5d3_can.dtsi
Nicolas Ferre 8dafaa1f28 ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals
File name had at91 prefix, which is not the case anymore for SAMA5D3.
AT91SAM9x5 was mentioned instead of SAMA5D3 SoC.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:10 +01:00

75 lines
1.8 KiB
Plaintext

/*
* sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with
* CAN support
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
*
* Licensed under GPLv2.
*/
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
ahb {
apb {
pinctrl@fffff200 {
can0 {
pinctrl_can0_rx_tx: can0_rx_tx {
atmel,pins =
<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
};
};
can1 {
pinctrl_can1_rx_tx: can1_rx_tx {
atmel,pins =
<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */
AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */
};
};
};
pmc: pmc@fffffc00 {
periphck {
can0_clk: can0_clk {
#clock-cells = <0>;
reg = <40>;
atmel,clk-output-range = <0 66000000>;
};
can1_clk: can1_clk {
#clock-cells = <0>;
reg = <41>;
atmel,clk-output-range = <0 66000000>;
};
};
};
can0: can@f000c000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf000c000 0x300>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_rx_tx>;
clocks = <&can0_clk>;
clock-names = "can_clk";
status = "disabled";
};
can1: can@f8010000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf8010000 0x300>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_rx_tx>;
clocks = <&can1_clk>;
clock-names = "can_clk";
status = "disabled";
};
};
};
};