linux/arch/powerpc/boot/dts/mpc8272ads.dts
Vitaly Bordug e02f73e9fd POWERPC: Added devicetree for mpc8272ads board
This adds current dts file used with MPC8272ADS,
introducing new mdio bitbang defines, as well as
fully-CPM2-SoC board design.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-10-03 21:35:46 +04:00

224 lines
8.8 KiB
Plaintext

/*
* MPC8272 ADS Device Tree Source
*
* Copyright 2005 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "MPC8272ADS";
compatible = "MPC8260ADS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8272@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <4000>; // L1, 16K
i-cache-size = <4000>; // L1, 16K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
32-bit;
linux,phandle = <201>;
linux,boot-cpu;
};
};
interrupt-controller@f8200000 {
linux,phandle = <f8200000>;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupt-controller;
reg = <f8200000 f8200004>;
built-in;
device_type = "pci-pic";
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 4000000 f4500000 00000020>;
};
soc8272@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
ranges = < 0 0 2 00000000 f0000000 00053000>;
reg = <f0000000 0>;
mdio@0 {
device_type = "mdio";
compatible = "fs_enet";
reg = <0 0>;
linux,phandle = <24520>;
#address-cells = <1>;
#size-cells = <0>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <10c00>;
interrupts = <19 1>;
reg = <0>;
bitbang = [ 12 12 13 02 02 01 ];
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <10c00>;
interrupts = <19 1>;
bitbang = [ 12 12 13 02 02 01 ];
reg = <3>;
device_type = "ethernet-phy";
};
};
ethernet@24000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
device-id = <2>;
compatible = "fs_enet";
model = "FCC";
reg = <11300 20 8400 100 11380 30>;
mac-address = [ 00 11 2F 99 43 54 ];
interrupts = <20 2>;
interrupt-parent = <10c00>;
phy-handle = <2452000>;
rx-clock = <13>;
tx-clock = <12>;
};
ethernet@25000 {
device_type = "network";
device-id = <3>;
compatible = "fs_enet";
model = "FCC";
reg = <11320 20 8500 100 113b0 30>;
mac-address = [ 00 11 2F 99 44 54 ];
interrupts = <21 2>;
interrupt-parent = <10c00>;
phy-handle = <2452001>;
rx-clock = <17>;
tx-clock = <18>;
};
cpm@f0000000 {
linux,phandle = <f0000000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "cpm";
model = "CPM2";
ranges = <00000000 00000000 3ffff>;
reg = <10d80 3280>;
command-proc = <119c0>;
brg-frequency = <17D7840>;
cpm_clk = <BEBC200>;
scc@11a00 {
device_type = "serial";
compatible = "cpm_uart";
model = "SCC";
device-id = <2>;
reg = <11a00 20 8000 100>;
current-speed = <1c200>;
interrupts = <28 2>;
interrupt-parent = <10c00>;
clock-setup = <0 00ffffff>;
rx-clock = <1>;
tx-clock = <1>;
};
scc@11a60 {
device_type = "serial";
compatible = "cpm_uart";
model = "SCC";
device-id = <5>;
reg = <11a60 20 8300 100>;
current-speed = <1c200>;
interrupts = <2b 2>;
interrupt-parent = <10c00>;
clock-setup = <1b ffffff00>;
rx-clock = <4>;
tx-clock = <4>;
};
};
interrupt-controller@10c00 {
linux,phandle = <10c00>;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupt-controller;
reg = <10c00 80>;
built-in;
device_type = "cpm-pic";
compatible = "CPM2";
};
pci@0500 {
linux,phandle = <0500>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "8272";
device_type = "pci";
reg = <10430 4dc>;
clock-frequency = <3f940aa>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x16 */
b000 0 0 1 f8200000 40 0
b000 0 0 2 f8200000 41 0
b000 0 0 3 f8200000 42 0
b000 0 0 4 f8200000 43 0
/* IDSEL 0x17 */
b800 0 0 1 f8200000 43 0
b800 0 0 2 f8200000 40 0
b800 0 0 3 f8200000 41 0
b800 0 0 4 f8200000 42 0
/* IDSEL 0x18 */
c000 0 0 1 f8200000 42 0
c000 0 0 2 f8200000 43 0
c000 0 0 3 f8200000 40 0
c000 0 0 4 f8200000 41 0>;
interrupt-parent = <10c00>;
interrupts = <14 3>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 40000000
01000000 0 00000000 f6000000 0 02000000>;
};
/* May need to remove if on a part without crypto engine */
crypto@30000 {
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 0>;
interrupt-parent = <10c00>;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
descriptor-types-mask = <01010ebf>;
};
};
};