system/linux
system/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux synced 2024-10-28 14:18:20 +00:00
Code Issues Packages Projects Releases Wiki Activity
linux/arch/arm/mach-s3c24xx/common.c
Linus Torvalds dfc25e4503 ARM: SoC: cleanups for 3.15 
These cleanup patches are mainly move stuff around and should all
 be harmless. They are mainly split out so that other branches can
 be based on top to avoid conflicts.
 
 Notable changes are:
 
 * We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
   longer used. (Uwe Kleine-König)
 * The Qualcomm MSM platform is split out into legacy mach-msm and
   new-style mach-qcom, to allow easier maintainance of the new
   hardware support without regressions. (Kumar Gala)
 * A rework of some of the Kconfig logic to simplify multiplatform
   support (Rob Herring)
 * Samsung Exynos gets closer to supporting multiplatform (Sachin
   Kamat and others)
 * mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
 * at91 gains some common clock framework support (Alexandre Belloni,
   Jean-Jacques Hiblot and other French people).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/yOWCrR//JCVInAQLOPBAAwTMkMrD8S8ggz6vfiQHZNdRPAC7NUJ46
 +eYKmBVi5d6EdnjNuRElWENsh0ZosSAUFHrXsIC2NdH9sAJ9HOqWNNLymuA59Jo9
 HZ/Ze6xQXDPNV7TROPoXuIli/2OCOXyyQHJsfI7h9V3PCx31qo0B5OdCxU0mtXK6
 r1giREhnJFwfQMF/FTdnzhalFJoSjWwv/nkpNmQDJKRLKj9GzwQqItqw68gV6RzU
 Gnt6YK+9xC1B0cfWTFhAm6kbr9i7mvHoMG5tE3no2uuJMn4K7TgeMqOyvPWhmUeB
 EZi656szT1m5VfRWOqG+7coZO2VM4GO4NI0Xfin3GHllugOYls1il/FAfCPMLiwh
 RvuOmQGCkLIpdkuHop5QaI/h1EzlHA59nzTjmGf1+wWPsm0CIg08XOD9izQbRnN9
 EmRqn1/8POIi17xcWyeMp8LB0APsTI+IflZFaYprEY9VlLLA/Pd+7udULhs8Bq8y
 1l6fB6aPZKnDKCBy/PEIR+y+EHFEbwfrx6zm/pxVDX6P5DlQMFWL78pdBoJUa2h8
 3pm/bSzNU5OSz1nJMLJv2jBTtnM5BvFgQBUi2qJ9Lr+nUhJXKCJ80kE/nOlXoCIU
 J952p3OhkYTQQcjuUVQeTXvRUOGB7mKok0pDFZNE6c7faqxTCudMABQq/KbMFstU
 eE3cH5FyYj4=
 =GcBb
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "These cleanup patches are mainly move stuff around and should all be
  harmless.  They are mainly split out so that other branches can be
  based on top to avoid conflicts.

  Notable changes are:

   - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
     longer used (Uwe Kleine-König)
   - The Qualcomm MSM platform is split out into legacy mach-msm and
     new-style mach-qcom, to allow easier maintainance of the new
     hardware support without regressions (Kumar Gala)
   - A rework of some of the Kconfig logic to simplify multiplatform
     support (Rob Herring)
   - Samsung Exynos gets closer to supporting multiplatform (Sachin
     Kamat and others)
   - mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
   - at91 gains some common clock framework support (Alexandre Belloni,
     Jean-Jacques Hiblot and other French people)"

* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
  ARM: hisi: select HAVE_ARM_SCU only for SMP
  ARM: efm32: allow uncompress debug output
  ARM: prima2: build reset code standalone
  ARM: at91: add PWM clock
  ARM: at91: move sam9261 SoC to common clk
  ARM: at91: prepare common clk transition for sam9261 SoC
  ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
  ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
  ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
  ARM: at91: dt: Add at91sam9261 dt SoC support
  ARM: at91: switch sam9rl to common clock framework
  ARM: at91/dt: define main clk frequency of at91sam9rlek
  ARM: at91/dt: define at91sam9rl clocks
  ARM: at91: prepare common clk transition for sam9rl SoCs
  ARM: at91: prepare sam9 dt boards transition to common clk
  ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
  ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
  ARM: at91: Add at91sam9rl DT SoC support
  ARM: at91: prepare at91sam9rl DT transition
  ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
  ...
2014-04-05 13:51:19 -07:00

537 lines
16 KiB
C
Raw Blame History

/* linux/arch/arm/plat-s3c24xx/cpu.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
* Ben Dooks <ben@simtec.co.uk>
*
* Common code for S3C24XX machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/platform_data/dma-s3c24xx.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
#include <asm/system_info.h>
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/dma.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/cpu-freq.h>
#include <plat/pll.h>
#include <plat/pwm-core.h>
#include "common.h"
/* table of supported CPUs */
static const char name_s3c2410[] = "S3C2410";
static const char name_s3c2412[] = "S3C2412";
static const char name_s3c2416[] = "S3C2416/S3C2450";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
static const char name_s3c2442b[] = "S3C2442B";
static const char name_s3c2443[] = "S3C2443";
static const char name_s3c2410a[] = "S3C2410A";
static const char name_s3c2440a[] = "S3C2440A";
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = 0x32410000,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
.init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410_init,
.name = name_s3c2410
},
{
.idcode = 0x32410002,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
.init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410a_init,
.name = name_s3c2410a
},
{
.idcode = 0x32440000,
.idmask = 0xffffffff,
.map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440
},
{
.idcode = 0x32440001,
.idmask = 0xffffffff,
.map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440a
},
{
.idcode = 0x32440aaa,
.idmask = 0xffffffff,
.map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
.name = name_s3c2442
},
{
.idcode = 0x32440aab,
.idmask = 0xffffffff,
.map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
.name = name_s3c2442b
},
{
.idcode = 0x32412001,
.idmask = 0xffffffff,
.map_io = s3c2412_map_io,
.init_clocks = s3c2412_init_clocks,
.init_uarts = s3c2412_init_uarts,
.init = s3c2412_init,
.name = name_s3c2412,
},
{ /* a newer version of the s3c2412 */
.idcode = 0x32412003,
.idmask = 0xffffffff,
.map_io = s3c2412_map_io,
.init_clocks = s3c2412_init_clocks,
.init_uarts = s3c2412_init_uarts,
.init = s3c2412_init,
.name = name_s3c2412,
},
{ /* a strange version of the s3c2416 */
.idcode = 0x32450003,
.idmask = 0xffffffff,
.map_io = s3c2416_map_io,
.init_clocks = s3c2416_init_clocks,
.init_uarts = s3c2416_init_uarts,
.init = s3c2416_init,
.name = name_s3c2416,
},
{
.idcode = 0x32443001,
.idmask = 0xffffffff,
.map_io = s3c2443_map_io,
.init_clocks = s3c2443_init_clocks,
.init_uarts = s3c2443_init_uarts,
.init = s3c2443_init,
.name = name_s3c2443,
},
};
/* minimal IO mapping */
static struct map_desc s3c_iodesc[] __initdata = {
IODESC_ENT(GPIO),
IODESC_ENT(IRQ),
IODESC_ENT(MEMCTRL),
IODESC_ENT(UART)
};
/* read cpu identificaiton code */
static unsigned long s3c24xx_read_idcode_v5(void)
{
#if defined(CONFIG_CPU_S3C2416)
/* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
u32 gs = __raw_readl(S3C24XX_GSTATUS1);
/* test for s3c2416 or similar device */
if ((gs >> 16) == 0x3245)
return gs;
#endif
#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
return __raw_readl(S3C2412_GSTATUS1);
#else
return 1UL; /* don't look like an 2400 */
#endif
}
static unsigned long s3c24xx_read_idcode_v4(void)
{
return __raw_readl(S3C2410_GSTATUS1);
}
static void s3c24xx_default_idle(void)
{
unsigned long tmp = 0;
int i;
/* idle the system by using the idle mode which will wait for an
* interrupt to happen before restarting the system.
*/
/* Warning: going into idle state upsets jtag scanning */
__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
/* the samsung port seems to do a loop and then unset idle.. */
for (i = 0; i < 50; i++)
tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
/* this bit is not cleared on re-start... */
__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
}
static struct samsung_pwm_variant s3c24xx_pwm_variant = {
.bits = 16,
.div_base = 1,
.has_tint_cstat = false,
.tclk_mask = (1 << 4),
};
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
arm_pm_idle = s3c24xx_default_idle;
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
if (cpu_architecture() >= CPU_ARCH_ARMv5) {
samsung_cpu_id = s3c24xx_read_idcode_v5();
} else {
samsung_cpu_id = s3c24xx_read_idcode_v4();
}
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
}
void __init samsung_set_timer_source(unsigned int event, unsigned int source)
{
s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
}
void __init samsung_timer_init(void)
{
unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
};
samsung_pwm_clocksource_init(S3C_VA_TIMER,
timer_irqs, &s3c24xx_pwm_variant);
}
/* Serial port registrations */
#define S3C2410_PA_UART0 (S3C24XX_PA_UART)
#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 )
#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 )
#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 )
static struct resource s3c2410_uart0_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K),
[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \
IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \
NULL, IORESOURCE_IRQ)
};
static struct resource s3c2410_uart1_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K),
[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \
IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \
NULL, IORESOURCE_IRQ)
};
static struct resource s3c2410_uart2_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K),
[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \
IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \
NULL, IORESOURCE_IRQ)
};
static struct resource s3c2410_uart3_resource[] = {
[0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K),
[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \
IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \
NULL, IORESOURCE_IRQ)
};
struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
[0] = {
.resources = s3c2410_uart0_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
},
[1] = {
.resources = s3c2410_uart1_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
},
[2] = {
.resources = s3c2410_uart2_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
},
[3] = {
.resources = s3c2410_uart3_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
},
};
/* initialise all the clocks */
void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
unsigned long hclk,
unsigned long pclk)
{
clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
clk_xtal.rate);
clk_mpll.rate = fclk;
clk_h.rate = hclk;
clk_p.rate = pclk;
clk_f.rate = fclk;
}
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
static struct resource s3c2410_dma_resource[] = {
[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
[1] = DEFINE_RES_IRQ(IRQ_DMA0),
[2] = DEFINE_RES_IRQ(IRQ_DMA1),
[3] = DEFINE_RES_IRQ(IRQ_DMA2),
[4] = DEFINE_RES_IRQ(IRQ_DMA3),
};
#endif
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
S3C24XX_DMA_CHANREQ(2, 2) |
S3C24XX_DMA_CHANREQ(1, 3),
},
[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
S3C24XX_DMA_CHANREQ(3, 2) |
S3C24XX_DMA_CHANREQ(3, 3),
},
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
S3C24XX_DMA_CHANREQ(1, 2),
},
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
};
static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2410_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2410_device_dma = {
.name = "s3c2410-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2410_dma_platdata,
},
};
#endif
#ifdef CONFIG_CPU_S3C2412
static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
};
static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2412_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2412_device_dma = {
.name = "s3c2412-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2412_dma_platdata,
},
};
#endif
#if defined(CONFIG_CPU_S3C2440)
static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
S3C24XX_DMA_CHANREQ(6, 1) |
S3C24XX_DMA_CHANREQ(2, 2) |
S3C24XX_DMA_CHANREQ(1, 3),
},
[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
S3C24XX_DMA_CHANREQ(3, 2) |
S3C24XX_DMA_CHANREQ(3, 3),
},
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
S3C24XX_DMA_CHANREQ(1, 2),
},
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
S3C24XX_DMA_CHANREQ(0, 2),
},
[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
S3C24XX_DMA_CHANREQ(5, 2),
},
[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
S3C24XX_DMA_CHANREQ(6, 3),
},
[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
S3C24XX_DMA_CHANREQ(5, 3),
},
[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
};
static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2440_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2440_device_dma = {
.name = "s3c2410-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2440_dma_platdata,
},
};
#endif
#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
static struct resource s3c2443_dma_resource[] = {
[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
[2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
[3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
[4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
[5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
[6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
};
static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
[DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
[DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
};
static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
.num_phy_channels = 6,
.channels = s3c2443_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2443_device_dma = {
.name = "s3c2443-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2443_dma_resource),
.resource = s3c2443_dma_resource,
.dev = {
.platform_data = &s3c2443_dma_platdata,
},
};
#endif
Reference in a new issue View git blame Copy permalink