linux/arch/arm/mach-cns3xxx/pm.c
Anton Vorontsov 6eb5d146d4 ARM: cns3xxx: Use IO memory accessors everywhere
Before it isn't too late let's switch to IO memory accessors.
This patch converts all current _REG users and _REG definitions.
There should be no functional changes.

Suggested-by: Ben Dooks <ben-linux@fluff.org>
Suggested-by: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
2010-06-08 17:31:29 +04:00

102 lines
2.2 KiB
C

/*
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/delay.h>
#include <mach/system.h>
#include <mach/cns3xxx.h>
void cns3xxx_pwr_clk_en(unsigned int block)
{
u32 reg = __raw_readl(PM_CLK_GATE_REG);
reg |= (block & PM_CLK_GATE_REG_MASK);
__raw_writel(reg, PM_CLK_GATE_REG);
}
void cns3xxx_pwr_power_up(unsigned int block)
{
u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
reg &= ~(block & CNS3XXX_PWR_PLL_ALL);
__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
/* Wait for 300us for the PLL output clock locked. */
udelay(300);
};
void cns3xxx_pwr_power_down(unsigned int block)
{
u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
/* write '1' to power down */
reg |= (block & CNS3XXX_PWR_PLL_ALL);
__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
};
static void cns3xxx_pwr_soft_rst_force(unsigned int block)
{
u32 reg = __raw_readl(PM_SOFT_RST_REG);
/*
* bit 0, 28, 29 => program low to reset,
* the other else program low and then high
*/
if (block & 0x30000001) {
reg &= ~(block & PM_SOFT_RST_REG_MASK);
} else {
reg &= ~(block & PM_SOFT_RST_REG_MASK);
reg |= (block & PM_SOFT_RST_REG_MASK);
}
__raw_writel(reg, PM_SOFT_RST_REG);
}
void cns3xxx_pwr_soft_rst(unsigned int block)
{
static unsigned int soft_reset;
if (soft_reset & block) {
/* SPI/I2C/GPIO use the same block, reset once. */
return;
} else {
soft_reset |= block;
}
cns3xxx_pwr_soft_rst_force(block);
}
void arch_reset(char mode, const char *cmd)
{
/*
* To reset, we hit the on-board reset register
* in the system FPGA.
*/
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL));
}
/*
* cns3xxx_cpu_clock - return CPU/L2 clock
* aclk: cpu clock/2
* hclk: cpu clock/4
* pclk: cpu clock/8
*/
int cns3xxx_cpu_clock(void)
{
u32 reg = __raw_readl(PM_CLK_CTRL_REG);
int cpu;
int cpu_sel;
int div_sel;
cpu_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
div_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
return cpu;
}