mirror of
https://github.com/torvalds/linux
synced 2024-07-22 11:10:46 +00:00
5c9ae5a875
CCGx has two copies of the firmware in addition to the bootloader. If the device is running FW1, FW2 can be updated with the new version. Dual firmware mode allows the CCG device to stay in a PD contract and support USB PD and Type-C functionality while a firmware update is in progress. First we read the currently flashed firmware version of both primary and secondary firmware and then compare it with version of firmware file to determine if flashing is required. Command framework is added to support sending commands to CCGx controller. We wait for response after sending the command and then read the response from RAB_RESPONSE register. Below commands are supported, - ENTER_FLASHING - RESET - PDPORT_ENABLE - JUMP_TO_BOOT - FLASH_ROW_RW - VALIDATE_FW Command specific mutex lock is also added to sync between driver and user threads. PD port number information is added which is required while sending PD_PORT_ENABLE command Signed-off-by: Ajay Gupta <ajayg@nvidia.com> [ heikki: Added ABI documentation. ] Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
7 lines
231 B
Plaintext
7 lines
231 B
Plaintext
What: /sys/bus/i2c/drivers/ucsi_ccg/.../do_flash
|
|
Date: May 2019
|
|
Contact: Ajay Gupta <ajayg@nvidia.com>
|
|
Description:
|
|
Tell the driver for Cypress CCGx Type-C controller to attempt
|
|
firmware upgrade by writing [Yy1] to the file.
|