linux/arch/arm/boot/dts/bcm2835-rpi-b.dts
Daniel Mack 805b4db807 ARM: bcm2835: Add Raspberry Pi's ACT LED to DT
The Raspberry Pi board has one GPIO-controlled LED labeled "ACT". Add it
to the DT via the gpio-leds driver, so users can control it from
userspace. If CONFIG_LEDS_TRIGGER_HEARTBEAT is set, the LED will also
signal some sign of life.

The GPIO circuitry is low-active. And as the bootloader may decide to
switch the LED on at boot time, the default state is 'keep'.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2013-05-16 20:29:48 -06:00

53 lines
764 B
Plaintext

/dts-v1/;
/include/ "bcm2835.dtsi"
/ {
compatible = "raspberrypi,model-b", "brcm,bcm2835";
model = "Raspberry Pi Model B";
memory {
reg = <0 0x10000000>;
};
leds {
compatible = "gpio-leds";
act {
label = "ACT";
gpios = <&gpio 16 1>;
default-state = "keep";
linux,default-trigger = "heartbeat";
};
};
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&alt0 &alt3>;
alt0: alt0 {
brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 14 15 40 45>;
brcm,function = <4>; /* alt0 */
};
alt3: alt3 {
brcm,pins = <48 49 50 51 52 53>;
brcm,function = <7>; /* alt3 */
};
};
&i2c0 {
status = "okay";
clock-frequency = <100000>;
};
&i2c1 {
status = "okay";
clock-frequency = <100000>;
};
&sdhci {
status = "okay";
bus-width = <4>;
};