linux/drivers/bluetooth
Hans de Goede 0671c06623 Bluetooth: btusb: Add workaround for remote-wakeup issues with Barrot 8041a02 fake CSR controllers
With the recent btusb change to detect and deal with more fake CSR
controllers, I decided to see if fake CSR controllers with Barrot
8041a02 chips would now work.

After much experimentation I came to the conclusion that it works, if I
have autosuspend enabled initially and then disable it after the device
has suspended at least once. Yes this is very weird, but I've tried many
things, like manually clearing the remote-wakeup feature. Doing a
runtime-resume + runtime suspend is the only way to get the receiver
to actually report received data (and/or pairing info) through its
bulk rx endpoint.

But the funkyness of the bulk-endpoint does not stop there, I mainly
found out about this problem, because with autosuspend enabled
(which usually ensures the suspend at least once condition is met),
the receiver stops reporting received data through its bulk rx endpoint
as soon as autosuspend kicks in. So I initially just disabled
autosuspend, but then the receiver does not work at all.

This was with a fake CSR receiver with a Barrot 8041a02 chip with a
bcdDevice value of 0x8891, a lmp_subver of 0x1012, a hci_rev of 0x0810
and a hci_ver of BLUETOOTH_VER_4_0.

Summarizing this specific fake CSR receiver has the following 2 issues:

1. The bulk rx endpoint will never report any data unless
the device was suspended at least once.

2. They will not wakeup when autosuspended and receiving data on their
bulk rx endpoint from e.g. a keyboard or mouse (IOW remote-wakeup support
is broken for the bulk endpoint).

Add a workaround for 1. which enables runtime-suspend, force-suspends
the hci and then wakes-it up by disabling runtime-suspend again.

Add a workaround for 2. which clears the hci's can_wake flag, this way
the hci will still be autosuspended when it is not open.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07 17:01:54 +02:00
..
ath3k.c Bluetooth: ath3k: use usb_control_msg_send() and usb_control_msg_recv() 2020-09-25 16:33:59 +02:00
bcm203x.c Bluetooth: Use fallthrough pseudo-keyword 2020-07-10 19:09:42 +02:00
bfusb.c Bluetooth: bfusb: Switch from BT_ERR to bt_dev_err where possible 2020-03-11 10:05:50 +02:00
bluecard_cs.c Bluetooth: Use fallthrough pseudo-keyword 2020-07-10 19:09:42 +02:00
bpa10x.c Bluetooth: bpa10x: change return value 2019-09-04 16:11:46 +02:00
bt3c_cs.c Bluetooth: bt3c_cs: Fix obsolete function 2018-09-27 12:57:39 +02:00
btbcm.c Bluetooth: btbcm: Added 003.006.007, changed 001.003.015 2020-05-28 10:28:12 +02:00
btbcm.h Bluetooth: btbcm: Make btbcm_setup_patchram use btbcm_finalize 2020-04-22 19:43:58 +02:00
btintel.c Bluetooth: btintel: Fix endianness issue for TLV version information 2020-12-07 17:01:03 +02:00
btintel.h Bluetooth: btusb: Define a function to construct firmware filename 2020-12-07 17:01:11 +02:00
btmrvl_debugfs.c Bluetooth: btmrvl: Re-use kstrtol_from_user() 2018-05-30 08:16:05 +02:00
btmrvl_drv.h Bluetooth: btmrvl: Drop unused GPIO includes 2019-01-22 09:51:20 +01:00
btmrvl_main.c Bluetooth: btmrvl_sdio: Implement prevent_wake 2020-06-12 08:38:52 +02:00
btmrvl_sdio.c Bluetooth: btmrvl: eliminate duplicates introducing btmrvl_reg_89xx 2020-08-02 19:59:43 +02:00
btmrvl_sdio.h btmrvl: add platform specific wakeup interrupt support 2016-05-02 19:26:15 +02:00
btmtksdio.c Bluetooth: btmtksdio: Add the missed release_firmware() in mtk_setup_firmware() 2020-12-07 17:00:12 +02:00
btmtkuart.c Bluetooth: btmtkuart: Use serdev_device_write_buf() instead of serdev_device_write() 2020-06-01 08:05:07 +02:00
btqca.c Bluetooth: btqca: Use NVM files based on SoC ID for WCN3991 2020-12-07 16:59:55 +02:00
btqca.h Bluetooth: btqca: Use NVM files based on SoC ID for WCN3991 2020-12-07 16:59:55 +02:00
btqcomsmd.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
btrsi.c Bluetooth: btrsi: fix bt tx timeout issue 2018-09-27 12:53:40 +02:00
btrtl.c Bluetooth: btrtl: fix incorrect skb allocation failure check 2020-11-11 11:53:56 +01:00
btrtl.h Bluetooth: Replace zero-length array with flexible-array member 2020-02-28 08:30:02 +01:00
btsdio.c Bluetooth: btsdio: Check for valid packet type 2020-01-15 22:28:51 +01:00
btusb.c Bluetooth: btusb: Add workaround for remote-wakeup issues with Barrot 8041a02 fake CSR controllers 2020-12-07 17:01:54 +02:00
dtl1_cs.c networking: add and use skb_put_u8() 2017-06-16 11:48:40 -04:00
h4_recv.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
hci_ag6xx.c Bluetooth: hci_uart: Replace zero-length array with flexible-array member 2020-02-13 08:28:38 +01:00
hci_ath.c Bluetooth: hci_uart: check for missing tty operations 2019-07-31 13:17:33 -07:00
hci_bcm.c Bluetooth: btbcm: Make btbcm_setup_patchram use btbcm_finalize 2020-04-22 19:43:58 +02:00
hci_bcsp.c Bluetooth: Fix invalid-free in bcsp_close() 2019-11-04 15:19:02 +01:00
hci_h4.c Bluetooth: hci_h4: Remove a redundant assignment in 'h4_flush()' 2020-02-28 08:43:57 +01:00
hci_h5.c Bluetooth: hci_h5: Add OBDA0623 ACPI HID 2020-11-23 12:26:03 +01:00
hci_intel.c Bluetooth: hci_intel: enable on new platform 2020-09-11 09:03:42 +02:00
hci_ldisc.c Bluetooth: hci_uart: Cancel init work before unregistering 2020-08-02 20:01:27 +02:00
hci_ll.c Bluetooth: hci_ll: add a small delay for wl1271 enable bt_en 2020-11-11 10:57:36 +01:00
hci_mrvl.c Bluetooth: hci_uart: check for missing tty operations 2019-07-31 13:17:33 -07:00
hci_nokia.c Bluetooth: hci_nokia: Save a few cycles in 'nokia_enqueue()' 2019-10-16 19:26:40 +02:00
hci_qca.c Bluetooth: btqca: Use NVM files based on SoC ID for WCN3991 2020-12-07 16:59:55 +02:00
hci_serdev.c Bluetooth: hci_serdev: Close UART port if NON_PERSISTENT_SETUP is set 2020-09-11 09:09:48 +02:00
hci_uart.h Bluetooth: hci_h4: Add support for ISO packets 2020-01-15 22:28:51 +01:00
hci_vhci.c Bluetooth: hci_vhci: Add support for ISO packets 2020-01-15 22:28:51 +01:00
Kconfig Bluetooth: hci_h5: btrtl: Add support for RTL8822C 2020-02-18 09:22:22 +01:00
Makefile Bluetooth: btwilink: drop superseded driver 2019-10-16 21:12:52 +02:00