linux/arch/arm/boot/dts/imx27.dtsi
Alexander Shiyan 93b331cec9 ARM: dts: imx27: Add VPU devicetree node
This patch adds the missing VPU devicetree node for i.MX27 CPUs.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:34 +08:00

386 lines
8.9 KiB
Plaintext

/*
* Copyright 2012 Sascha Hauer, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "skeleton.dtsi"
/ {
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
spi0 = &cspi1;
spi1 = &cspi2;
spi2 = &cspi3;
};
avic: avic-interrupt-controller@e0000000 {
compatible = "fsl,imx27-avic", "fsl,avic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10040000 0x1000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc26m {
compatible = "fsl,imx-osc26m", "fixed-clock";
clock-frequency = <26000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&avic>;
ranges;
aipi@10000000 { /* AIPI1 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x10000000 0x20000>;
ranges;
dma: dma@10001000 {
compatible = "fsl,imx27-dma";
reg = <0x10001000 0x1000>;
interrupts = <32>;
clocks = <&clks 50>, <&clks 70>;
clock-names = "ipg", "ahb";
#dma-cells = <1>;
#dma-channels = <16>;
};
wdog: wdog@10002000 {
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
reg = <0x10002000 0x1000>;
interrupts = <27>;
clocks = <&clks 0>;
};
gpt1: timer@10003000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10003000 0x1000>;
interrupts = <26>;
clocks = <&clks 46>, <&clks 61>;
clock-names = "ipg", "per";
};
gpt2: timer@10004000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10004000 0x1000>;
interrupts = <25>;
clocks = <&clks 45>, <&clks 61>;
clock-names = "ipg", "per";
};
gpt3: timer@10005000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10005000 0x1000>;
interrupts = <24>;
clocks = <&clks 44>, <&clks 61>;
clock-names = "ipg", "per";
};
pwm0: pwm@10006000 {
compatible = "fsl,imx27-pwm";
reg = <0x10006000 0x1000>;
interrupts = <23>;
clocks = <&clks 34>, <&clks 61>;
clock-names = "ipg", "per";
};
uart1: serial@1000a000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000a000 0x1000>;
interrupts = <20>;
clocks = <&clks 81>, <&clks 61>;
clock-names = "ipg", "per";
status = "disabled";
};
uart2: serial@1000b000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000b000 0x1000>;
interrupts = <19>;
clocks = <&clks 80>, <&clks 61>;
clock-names = "ipg", "per";
status = "disabled";
};
uart3: serial@1000c000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000c000 0x1000>;
interrupts = <18>;
clocks = <&clks 79>, <&clks 61>;
clock-names = "ipg", "per";
status = "disabled";
};
uart4: serial@1000d000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000d000 0x1000>;
interrupts = <17>;
clocks = <&clks 78>, <&clks 61>;
clock-names = "ipg", "per";
status = "disabled";
};
cspi1: cspi@1000e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
reg = <0x1000e000 0x1000>;
interrupts = <16>;
clocks = <&clks 53>, <&clks 53>;
clock-names = "ipg", "per";
status = "disabled";
};
cspi2: cspi@1000f000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
reg = <0x1000f000 0x1000>;
interrupts = <15>;
clocks = <&clks 52>, <&clks 52>;
clock-names = "ipg", "per";
status = "disabled";
};
i2c1: i2c@10012000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x10012000 0x1000>;
interrupts = <12>;
clocks = <&clks 40>;
status = "disabled";
};
sdhci1: sdhci@10013000 {
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x10013000 0x1000>;
interrupts = <11>;
clocks = <&clks 30>, <&clks 60>;
clock-names = "ipg", "per";
dmas = <&dma 7>;
dma-names = "rx-tx";
status = "disabled";
};
sdhci2: sdhci@10014000 {
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x10014000 0x1000>;
interrupts = <10>;
clocks = <&clks 29>, <&clks 60>;
clock-names = "ipg", "per";
dmas = <&dma 6>;
dma-names = "rx-tx";
status = "disabled";
};
gpio1: gpio@10015000 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015000 0x100>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@10015100 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015100 0x100>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@10015200 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015200 0x100>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@10015300 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015300 0x100>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio5: gpio@10015400 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015400 0x100>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio@10015500 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015500 0x100>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
cspi3: cspi@10017000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
reg = <0x10017000 0x1000>;
interrupts = <6>;
clocks = <&clks 51>, <&clks 51>;
clock-names = "ipg", "per";
status = "disabled";
};
gpt4: timer@10019000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10019000 0x1000>;
interrupts = <4>;
clocks = <&clks 43>, <&clks 61>;
clock-names = "ipg", "per";
};
gpt5: timer@1001a000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x1001a000 0x1000>;
interrupts = <3>;
clocks = <&clks 42>, <&clks 61>;
clock-names = "ipg", "per";
};
uart5: serial@1001b000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001b000 0x1000>;
interrupts = <49>;
clocks = <&clks 77>, <&clks 61>;
clock-names = "ipg", "per";
status = "disabled";
};
uart6: serial@1001c000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001c000 0x1000>;
interrupts = <48>;
clocks = <&clks 78>, <&clks 61>;
clock-names = "ipg", "per";
status = "disabled";
};
i2c2: i2c@1001d000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x1001d000 0x1000>;
interrupts = <1>;
clocks = <&clks 39>;
status = "disabled";
};
sdhci3: sdhci@1001e000 {
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x1001e000 0x1000>;
interrupts = <9>;
clocks = <&clks 28>, <&clks 60>;
clock-names = "ipg", "per";
dmas = <&dma 36>;
dma-names = "rx-tx";
status = "disabled";
};
gpt6: timer@1001f000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x1001f000 0x1000>;
interrupts = <2>;
clocks = <&clks 41>, <&clks 61>;
clock-names = "ipg", "per";
};
};
aipi@10020000 { /* AIPI2 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x10020000 0x20000>;
ranges;
coda: coda@10023000 {
compatible = "fsl,imx27-vpu";
reg = <0x10023000 0x0200>;
interrupts = <53>;
clocks = <&clks 57>, <&clks 66>;
clock-names = "per", "ahb";
iram = <&iram>;
};
clks: ccm@10027000{
compatible = "fsl,imx27-ccm";
reg = <0x10027000 0x1000>;
#clock-cells = <1>;
};
fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x4000>;
interrupts = <50>;
clocks = <&clks 48>, <&clks 67>, <&clks 0>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
iram: iram@ffff4c00 {
compatible = "mmio-sram";
reg = <0xffff4c00 0xb400>;
};
nfc: nand@d8000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx27-nand";
reg = <0xd8000000 0x1000>;
interrupts = <29>;
clocks = <&clks 54>;
status = "disabled";
};
};
};