linux/drivers/net/ethernet/freescale/fs_enet/fec.h
Vladimir Ermakov ba568335b0 fs_enet: Add MPC5125 FEC support and PHY interface selection
Add compatible string for MPC5125 FEC. The FEC on MPC5125 additionally
supports RMII PHY interface. Configure controller/PHY interface type
according to the optional phy-connection-type property in the ethernet
node. This property should be either "rmii" or "mii".

Signed-off-by: Vladimir Ermakov <vooon341@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19 18:02:05 -04:00

45 lines
1.5 KiB
C

#ifndef FS_ENET_FEC_H
#define FS_ENET_FEC_H
/* CRC polynomium used by the FEC for the multicast group filtering */
#define FEC_CRC_POLY 0x04C11DB7
#define FEC_MAX_MULTICAST_ADDRS 64
/* Interrupt events/masks.
*/
#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */
#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */
#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */
#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */
#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */
#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */
#define FEC_ENET_RXF 0x02000000U /* Full frame received */
#define FEC_ENET_RXB 0x01000000U /* A buffer was received */
#define FEC_ENET_MII 0x00800000U /* MII interrupt */
#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */
#define FEC_ECNTRL_PINMUX 0x00000004
#define FEC_ECNTRL_ETHER_EN 0x00000002
#define FEC_ECNTRL_RESET 0x00000001
/* RMII mode enabled only when MII_MODE bit is set too. */
#define FEC_RCNTRL_RMII_MODE (0x00000100 | \
FEC_RCNTRL_MII_MODE | FEC_RCNTRL_FCE)
#define FEC_RCNTRL_FCE 0x00000020
#define FEC_RCNTRL_BC_REJ 0x00000010
#define FEC_RCNTRL_PROM 0x00000008
#define FEC_RCNTRL_MII_MODE 0x00000004
#define FEC_RCNTRL_DRT 0x00000002
#define FEC_RCNTRL_LOOP 0x00000001
#define FEC_TCNTRL_FDEN 0x00000004
#define FEC_TCNTRL_HBC 0x00000002
#define FEC_TCNTRL_GTS 0x00000001
/*
* Delay to wait for FEC reset command to complete (in us)
*/
#define FEC_RESET_DELAY 50
#endif