linux/arch/arm/boot/dts/r8a7791-koelsch.dts
Laurent Pinchart fcf0c725cb ARM: shmobile: koelsch: Specify external clock frequency in DT
The external crystal frequency is 20MHz on the Koelsch board. Specify it
in the device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19 20:01:34 +09:00

66 lines
1.2 KiB
Plaintext

/*
* Device Tree Source for the Koelsch board
*
* Copyright (C) 2013 Renesas Electronics Corporation
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
#include "r8a7791.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Koelsch";
compatible = "renesas,koelsch", "renesas,r8a7791";
chosen {
bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x80000000>;
};
lbsc {
#address-cells = <1>;
#size-cells = <1>;
};
leds {
compatible = "gpio-leds";
led6 {
gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
};
led7 {
gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
};
led8 {
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
};
};
};
&extal_clk {
clock-frequency = <20000000>;
};
&pfc {
pinctrl-0 = <&scif0_pins &scif1_pins>;
pinctrl-names = "default";
scif0_pins: serial0 {
renesas,groups = "scif0_data_d";
renesas,function = "scif0";
};
scif1_pins: serial1 {
renesas,groups = "scif1_data_d";
renesas,function = "scif1";
};
};