linux/arch/mips
Linus Torvalds d9862cfbe2 Here's the main MIPS pull request for v5.1:
- Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
   (GINVT) instructions, allowing for more efficient TLB maintenance when
   running on a CPU such as the I6500 that supports these.
 
 - Enable huge page support for MIPS64r6.
 
 - Optimize post-DMA cache sync by removing that code entirely for kernel
   configurations in which we know it won't be needed.
 
 - The number of pages allocated for interrupt stacks is now calculated
   correctly, where before we would wastefully allocate too much memory
   in some configurations.
 
 - The ath79 platform migrates to devicetree.
 
 - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.
 
 - The ingenic/jz4740 platform gains support for appended devicetrees.
 
 - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
   cleanups as do various pieces of core architecture code.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXH3BQxUccGF1bC5idXJ0
 b25AbWlwcy5jb20ACgkQPqefrLV1AN1+4wD+Oh4JTfZN/NEOQMlrSkXxjEHqjX3u
 1Y6CiiPCs+q2UnYBANb+ic+ZH5MnvJxxmcvlYI2q3rIh4b8TDriip4KMUTUP
 =Sw9X
 -----END PGP SIGNATURE-----

Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:

 - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
   (GINVT) instructions, allowing for more efficient TLB maintenance
   when running on a CPU such as the I6500 that supports these.

 - Enable huge page support for MIPS64r6.

 - Optimize post-DMA cache sync by removing that code entirely for
   kernel configurations in which we know it won't be needed.

 - The number of pages allocated for interrupt stacks is now calculated
   correctly, where before we would wastefully allocate too much memory
   in some configurations.

 - The ath79 platform migrates to devicetree.

 - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.

 - The ingenic/jz4740 platform gains support for appended devicetrees.

 - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
   cleanups as do various pieces of core architecture code.

* tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits)
  MIPS: lantiq: Remove separate GPHY Firmware loader
  MIPS: ingenic: Add support for appended devicetree
  MIPS: SGI-IP27: rework HUB interrupts
  MIPS: SGI-IP27: do boot CPU init later
  MIPS: SGI-IP27: do xtalk scanning later
  MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output
  MIPS: SGI-IP27: clean up bridge access and header files
  MIPS: SGI-IP27: get rid of volatile and hubreg_t
  MIPS: irq: Allocate accurate order pages for irq stack
  MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys()
  MIPS: eBPF: Remove REG_32BIT_ZERO_EX
  MIPS: eBPF: Always return sign extended 32b values
  MIPS: CM: Fix indentation
  MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support
  MIPS: OCTEON: program rx/tx-delay always from DT
  MIPS: OCTEON: delete board-specific link status
  MIPS: OCTEON: don't lie about interface type of CN3005 board
  MIPS: OCTEON: warn if deprecated link status is being used
  MIPS: OCTEON: add fixed-link nodes to in-kernel device tree
  MIPS: Delete unused flush_cache_sigtramp()
  ...
2019-03-05 11:28:25 -08:00
..
alchemy A few early MIPS fixes for 4.21: 2019-01-05 12:48:25 -08:00
ar7 net: phy: fixed-phy: Drop GPIO from fixed_phy_add() 2019-02-04 18:33:36 -08:00
ath25 PCI: consolidate PCI config entry in drivers/pci 2018-11-23 11:45:34 +09:00
ath79 MIPS: ath79: drop !OF clock code 2019-01-22 11:17:22 -08:00
bcm47xx Here's the main MIPS pull request for v5.1: 2019-03-05 11:28:25 -08:00
bcm63xx MIPS: BCM63XX: provide DMA masks for ethernet devices 2019-02-25 12:56:39 -08:00
bmips mm: remove include/linux/bootmem.h 2018-10-31 08:54:16 -07:00
boot Here's the main MIPS pull request for v5.1: 2019-03-05 11:28:25 -08:00
cavium-octeon Here's the main MIPS pull request for v5.1: 2019-03-05 11:28:25 -08:00
cobalt
configs Here's the main MIPS pull request for v5.1: 2019-03-05 11:28:25 -08:00
crypto
dec mm: remove include/linux/bootmem.h 2018-10-31 08:54:16 -07:00
emma mm: remove include/linux/bootmem.h 2018-10-31 08:54:16 -07:00
fw mm: remove include/linux/bootmem.h 2018-10-31 08:54:16 -07:00
generic
include Here's the main MIPS pull request for v5.1: 2019-03-05 11:28:25 -08:00
jazz MIPS: jazz: fix 64bit build 2019-01-09 13:14:34 -08:00
jz4740 MIPS: ingenic: Add support for appended devicetree 2019-02-21 15:55:41 -08:00
kernel Here's the main MIPS pull request for v5.1: 2019-03-05 11:28:25 -08:00
kvm MIPS: MemoryMapID (MMID) Support 2019-02-04 10:56:41 -08:00
lantiq Here's the main MIPS pull request for v5.1: 2019-03-05 11:28:25 -08:00
lasat mm: remove include/linux/bootmem.h 2018-10-31 08:54:16 -07:00
lib MIPS: MemoryMapID (MMID) Support 2019-02-04 10:56:41 -08:00
loongson32 MIPS: Loongson32: Remove DMA & NAND devices from ls1b/board.c 2019-02-04 14:44:33 -08:00
loongson64 mips: loongson64: remove unreachable(), fix loongson_poweroff(). 2019-02-07 11:50:14 -08:00
math-emu mips: math-emu: no need to check return value of debugfs_create functions 2019-01-22 11:17:20 -08:00
mm Here's the main MIPS pull request for v5.1: 2019-03-05 11:28:25 -08:00
mti-malta MIPS: malta: Use img-ascii-lcd driver for LCD display 2018-11-20 21:05:39 -08:00
net MIPS: eBPF: Fix icache flush end address 2019-03-02 00:04:15 +01:00
netlogic mm: remove include/linux/bootmem.h 2018-10-31 08:54:16 -07:00
oprofile Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
paravirt
pci Here's the main MIPS pull request for v5.1: 2019-03-05 11:28:25 -08:00
pic32
pistachio
pmcs-msp71xx PCI: consolidate PCI config entry in drivers/pci 2018-11-23 11:45:34 +09:00
pnx833x
power
ralink mips: ralink: no need to check return value of debugfs_create functions 2019-01-22 11:17:20 -08:00
rb532 ata: rb532_cf: Convert to use GPIO descriptors 2018-12-04 17:15:25 -07:00
sgi-ip22
sgi-ip27 MIPS: SGI-IP27: rework HUB interrupts 2019-02-19 12:46:03 -08:00
sgi-ip32
sibyte Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
sni
tools
txx9 PCI: consolidate PCI config entry in drivers/pci 2018-11-23 11:45:34 +09:00
vdso MIPS: VDSO: Include $(ccflags-vdso) in o32,n32 .lds builds 2019-01-29 11:50:58 -08:00
vr41xx PCI: consolidate PCI config entry in drivers/pci 2018-11-23 11:45:34 +09:00
Kbuild
Kbuild.platforms
Kconfig Here's the main MIPS pull request for v5.1: 2019-03-05 11:28:25 -08:00
Kconfig.debug
Makefile MIPS: Add GINVT instruction helpers 2019-02-04 10:56:35 -08:00
Makefile.postlink