linux/include/acpi/processor.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

437 lines
11 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ACPI_PROCESSOR_H
#define __ACPI_PROCESSOR_H
#include <linux/kernel.h>
#include <linux/cpu.h>
#include <linux/thermal.h>
#include <asm/acpi.h>
#define ACPI_PROCESSOR_CLASS "processor"
#define ACPI_PROCESSOR_DEVICE_NAME "Processor"
#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007"
#define ACPI_PROCESSOR_CONTAINER_HID "ACPI0010"
#define ACPI_PROCESSOR_BUSY_METRIC 10
#define ACPI_PROCESSOR_MAX_POWER 8
#define ACPI_PROCESSOR_MAX_C2_LATENCY 100
#define ACPI_PROCESSOR_MAX_C3_LATENCY 1000
#define ACPI_PROCESSOR_MAX_THROTTLING 16
#define ACPI_PROCESSOR_MAX_THROTTLE 250 /* 25% */
#define ACPI_PROCESSOR_MAX_DUTY_WIDTH 4
#define ACPI_PDC_REVISION_ID 0x1
#define ACPI_PSD_REV0_REVISION 0 /* Support for _PSD as in ACPI 3.0 */
#define ACPI_PSD_REV0_ENTRIES 5
#define ACPI_TSD_REV0_REVISION 0 /* Support for _PSD as in ACPI 3.0 */
#define ACPI_TSD_REV0_ENTRIES 5
/*
* Types of coordination defined in ACPI 3.0. Same macros can be used across
* P, C and T states
*/
#define DOMAIN_COORD_TYPE_SW_ALL 0xfc
#define DOMAIN_COORD_TYPE_SW_ANY 0xfd
#define DOMAIN_COORD_TYPE_HW_ALL 0xfe
#define ACPI_CSTATE_SYSTEMIO 0
#define ACPI_CSTATE_FFH 1
#define ACPI_CSTATE_HALT 2
#define ACPI_CSTATE_INTEGER 3
#define ACPI_CX_DESC_LEN 32
/* Power Management */
struct acpi_processor_cx;
struct acpi_power_register {
u8 descriptor;
u16 length;
u8 space_id;
u8 bit_width;
u8 bit_offset;
u8 access_size;
u64 address;
} __packed;
struct acpi_processor_cx {
u8 valid;
u8 type;
u32 address;
u8 entry_method;
u8 index;
u32 latency;
u8 bm_sts_skip;
char desc[ACPI_CX_DESC_LEN];
};
struct acpi_lpi_state {
u32 min_residency;
u32 wake_latency; /* worst case */
u32 flags;
u32 arch_flags;
u32 res_cnt_freq;
u32 enable_parent_state;
u64 address;
u8 index;
u8 entry_method;
char desc[ACPI_CX_DESC_LEN];
};
struct acpi_processor_power {
int count;
union {
struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
struct acpi_lpi_state lpi_states[ACPI_PROCESSOR_MAX_POWER];
};
int timer_broadcast_on_state;
};
/* Performance Management */
struct acpi_psd_package {
u64 num_entries;
u64 revision;
u64 domain;
u64 coord_type;
u64 num_processors;
} __packed;
struct acpi_pct_register {
u8 descriptor;
u16 length;
u8 space_id;
u8 bit_width;
u8 bit_offset;
u8 reserved;
u64 address;
} __packed;
struct acpi_processor_px {
u64 core_frequency; /* megahertz */
u64 power; /* milliWatts */
u64 transition_latency; /* microseconds */
u64 bus_master_latency; /* microseconds */
u64 control; /* control value */
u64 status; /* success indicator */
};
struct acpi_processor_performance {
unsigned int state;
unsigned int platform_limit;
struct acpi_pct_register control_register;
struct acpi_pct_register status_register;
unsigned int state_count;
struct acpi_processor_px *states;
struct acpi_psd_package domain_info;
cpumask_var_t shared_cpu_map;
unsigned int shared_type;
};
/* Throttling Control */
struct acpi_tsd_package {
u64 num_entries;
u64 revision;
u64 domain;
u64 coord_type;
u64 num_processors;
} __packed;
struct acpi_ptc_register {
u8 descriptor;
u16 length;
u8 space_id;
u8 bit_width;
u8 bit_offset;
u8 reserved;
u64 address;
} __packed;
struct acpi_processor_tx_tss {
u64 freqpercentage; /* */
u64 power; /* milliWatts */
u64 transition_latency; /* microseconds */
u64 control; /* control value */
u64 status; /* success indicator */
};
struct acpi_processor_tx {
u16 power;
u16 performance;
};
struct acpi_processor;
struct acpi_processor_throttling {
unsigned int state;
unsigned int platform_limit;
struct acpi_pct_register control_register;
struct acpi_pct_register status_register;
unsigned int state_count;
struct acpi_processor_tx_tss *states_tss;
struct acpi_tsd_package domain_info;
cpumask_var_t shared_cpu_map;
int (*acpi_processor_get_throttling) (struct acpi_processor * pr);
int (*acpi_processor_set_throttling) (struct acpi_processor * pr,
int state, bool force);
u32 address;
u8 duty_offset;
u8 duty_width;
u8 tsd_valid_flag;
unsigned int shared_type;
struct acpi_processor_tx states[ACPI_PROCESSOR_MAX_THROTTLING];
};
/* Limit Interface */
struct acpi_processor_lx {
int px; /* performance state */
int tx; /* throttle level */
};
struct acpi_processor_limit {
struct acpi_processor_lx state; /* current limit */
struct acpi_processor_lx thermal; /* thermal limit */
struct acpi_processor_lx user; /* user limit */
};
struct acpi_processor_flags {
u8 power:1;
u8 performance:1;
u8 throttling:1;
u8 limit:1;
u8 bm_control:1;
u8 bm_check:1;
u8 has_cst:1;
u8 has_lpi:1;
u8 power_setup_done:1;
u8 bm_rld_set:1;
u8 need_hotplug_init:1;
};
struct acpi_processor {
acpi_handle handle;
u32 acpi_id;
phys_cpuid_t phys_id; /* CPU hardware ID such as APIC ID for x86 */
u32 id; /* CPU logical ID allocated by OS */
u32 pblk;
int performance_platform_limit;
int throttling_platform_limit;
/* 0 - states 0..n-th state available */
struct acpi_processor_flags flags;
struct acpi_processor_power power;
struct acpi_processor_performance *performance;
struct acpi_processor_throttling throttling;
struct acpi_processor_limit limit;
struct thermal_cooling_device *cdev;
struct device *dev; /* Processor device. */
};
struct acpi_processor_errata {
u8 smp;
struct {
u8 throttle:1;
u8 fdma:1;
u8 reserved:6;
u32 bmisx;
} piix4;
};
extern int acpi_processor_preregister_performance(struct
acpi_processor_performance
__percpu *performance);
extern int acpi_processor_register_performance(struct acpi_processor_performance
*performance, unsigned int cpu);
extern void acpi_processor_unregister_performance(unsigned int cpu);
int acpi_processor_pstate_control(void);
/* note: this locks both the calling module and the processor module
if a _PPC object exists, rmmod is disallowed then */
int acpi_processor_notify_smm(struct module *calling_module);
/* parsing the _P* objects. */
extern int acpi_processor_get_performance_info(struct acpi_processor *pr);
/* for communication between multiple parts of the processor kernel module */
DECLARE_PER_CPU(struct acpi_processor *, processors);
extern struct acpi_processor_errata errata;
#if defined(ARCH_HAS_POWER_INIT) && defined(CONFIG_ACPI_PROCESSOR_CSTATE)
void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
unsigned int cpu);
int acpi_processor_ffh_cstate_probe(unsigned int cpu,
struct acpi_processor_cx *cx,
struct acpi_power_register *reg);
void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cstate);
#else
static inline void acpi_processor_power_init_bm_check(struct
acpi_processor_flags
*flags, unsigned int cpu)
{
flags->bm_check = 1;
return;
}
static inline int acpi_processor_ffh_cstate_probe(unsigned int cpu,
struct acpi_processor_cx *cx,
struct acpi_power_register
*reg)
{
return -1;
}
static inline void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx
*cstate)
{
return;
}
#endif
/* in processor_perflib.c */
#ifdef CONFIG_CPU_FREQ
void acpi_processor_ppc_init(void);
void acpi_processor_ppc_exit(void);
void acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag);
extern int acpi_processor_get_bios_limit(int cpu, unsigned int *limit);
#else
static inline void acpi_processor_ppc_init(void)
{
return;
}
static inline void acpi_processor_ppc_exit(void)
{
return;
}
static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr,
int event_flag)
{
static unsigned int printout = 1;
if (printout) {
printk(KERN_WARNING
"Warning: Processor Platform Limit event detected, but not handled.\n");
printk(KERN_WARNING
"Consider compiling CPUfreq support into your kernel.\n");
printout = 0;
}
return 0;
}
static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit)
{
return -ENODEV;
}
#endif /* CONFIG_CPU_FREQ */
/* in processor_core.c */
phys_cpuid_t acpi_get_phys_id(acpi_handle, int type, u32 acpi_id);
phys_cpuid_t acpi_map_madt_entry(u32 acpi_id);
int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id);
int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id);
#ifdef CONFIG_ACPI_CPPC_LIB
extern int acpi_cppc_processor_probe(struct acpi_processor *pr);
extern void acpi_cppc_processor_exit(struct acpi_processor *pr);
#else
static inline int acpi_cppc_processor_probe(struct acpi_processor *pr)
{
return 0;
}
static inline void acpi_cppc_processor_exit(struct acpi_processor *pr)
{
return;
}
#endif /* CONFIG_ACPI_CPPC_LIB */
/* in processor_pdc.c */
void acpi_processor_set_pdc(acpi_handle handle);
/* in processor_throttling.c */
#ifdef CONFIG_ACPI_CPU_FREQ_PSS
int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
int acpi_processor_get_throttling_info(struct acpi_processor *pr);
extern int acpi_processor_set_throttling(struct acpi_processor *pr,
int state, bool force);
/*
* Reevaluate whether the T-state is invalid after one cpu is
* onlined/offlined. In such case the flags.throttling will be updated.
*/
extern void acpi_processor_reevaluate_tstate(struct acpi_processor *pr,
bool is_dead);
extern const struct file_operations acpi_processor_throttling_fops;
extern void acpi_processor_throttling_init(void);
#else
static inline int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
{
return 0;
}
static inline int acpi_processor_get_throttling_info(struct acpi_processor *pr)
{
return -ENODEV;
}
static inline int acpi_processor_set_throttling(struct acpi_processor *pr,
int state, bool force)
{
return -ENODEV;
}
static inline void acpi_processor_reevaluate_tstate(struct acpi_processor *pr,
bool is_dead) {}
static inline void acpi_processor_throttling_init(void) {}
#endif /* CONFIG_ACPI_CPU_FREQ_PSS */
/* in processor_idle.c */
extern struct cpuidle_driver acpi_idle_driver;
#ifdef CONFIG_ACPI_PROCESSOR_IDLE
int acpi_processor_power_init(struct acpi_processor *pr);
int acpi_processor_power_exit(struct acpi_processor *pr);
int acpi_processor_power_state_has_changed(struct acpi_processor *pr);
int acpi_processor_hotplug(struct acpi_processor *pr);
#else
static inline int acpi_processor_power_init(struct acpi_processor *pr)
{
return -ENODEV;
}
static inline int acpi_processor_power_exit(struct acpi_processor *pr)
{
return -ENODEV;
}
static inline int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
{
return -ENODEV;
}
static inline int acpi_processor_hotplug(struct acpi_processor *pr)
{
return -ENODEV;
}
#endif /* CONFIG_ACPI_PROCESSOR_IDLE */
/* in processor_thermal.c */
int acpi_processor_get_limit_info(struct acpi_processor *pr);
extern const struct thermal_cooling_device_ops processor_cooling_ops;
#if defined(CONFIG_ACPI_CPU_FREQ_PSS) & defined(CONFIG_CPU_FREQ)
void acpi_thermal_cpufreq_init(void);
void acpi_thermal_cpufreq_exit(void);
#else
static inline void acpi_thermal_cpufreq_init(void)
{
return;
}
static inline void acpi_thermal_cpufreq_exit(void)
{
return;
}
#endif /* CONFIG_ACPI_CPU_FREQ_PSS */
#endif