Kirshenbaum Erez 668b2bbd7f wil6210: add HW write-back option in TX descriptor ... Map BIT 9 in TX DMA DWARD 0 as HW write back option. We must turn on this option in the last TX descriptor, this is required for old HW compatability. This option indicate to HW that WB is required for this descriptor. Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>		2013-06-24 14:44:26 -04:00
..
cfg80211.c	wil6210: Init Rx vring right after reset	2013-06-12 15:06:52 -04:00
debug.c	wil6210: trace support	2013-05-22 15:08:27 -04:00
debugfs.c	wil6210: 'length' in Tx/Rx descriptors is little endian	2013-05-22 15:05:34 -04:00
interrupt.c	wil6210: use NAPI	2013-05-22 15:08:35 -04:00
Kconfig	wil6210: fix name of tracing config option	2013-06-12 15:06:52 -04:00
main.c	wil6210: Fix AP/PCP start flow	2013-06-12 15:06:52 -04:00
Makefile	wil6210: trace support	2013-05-22 15:08:27 -04:00
netdev.c	wil6210: use NAPI	2013-05-22 15:08:35 -04:00
pcie_bus.c	wil6210: headers clean-up	2013-03-13 14:26:21 -04:00
trace.c	wil6210: trace support	2013-05-22 15:08:27 -04:00
trace.h	wil6210: trace support	2013-05-22 15:08:27 -04:00
txrx.c	wil6210: add HW write-back option in TX descriptor	2013-06-24 14:44:26 -04:00
txrx.h	wil6210: add HW write-back option in TX descriptor	2013-06-24 14:44:26 -04:00
wil6210.h	wil6210: Send EAPOL frames using normal Tx queue	2013-06-12 15:06:51 -04:00
wmi.c	wil6210: Send EAPOL frames using normal Tx queue	2013-06-12 15:06:51 -04:00
wmi.h	wil6210: sync with new firmware	2013-03-13 14:26:21 -04:00