linux/drivers/usb
Vitaly Kuznetsov d73a9b3001 USB: usb-storage: unusual_devs entry for the Samsung YP-CP3
Add an unusual_devs entry for the Samsung YP-CP3 MP4 player.

User was getting the following errors in dmesg:
 usb 2-6: reset high speed USB device using ehci_hcd and address 2
 usb 2-6: reset high speed USB device using ehci_hcd and address 2
 usb 2-6: reset high speed USB device using ehci_hcd and address 2
 usb 2-6: USB disconnect, address 2
 sd 3:0:0:0: [sdb] Assuming drive cache: write through
 sdb:<2>ldm_validate_partition_table(): Disk read failed.
 Dev sdb: unable to read RDB block 0
  unable to read partition table

Signed-off-by: Vitaly Kuznetsov <vitty@altlinux.ru>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
CC: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 15:45:45 -08:00
..
atm USB: atm: ueagle-atm: fix up some permissions on the sysfs files 2010-11-15 14:04:13 -08:00
c67x00 usb: makefile cleanup 2010-10-22 10:22:07 -07:00
class Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2010-10-22 20:30:48 -07:00
core USB: core: Add input prompt and help text for USB_OTG config 2010-12-16 15:45:44 -08:00
early usb: makefile cleanup 2010-10-22 10:22:07 -07:00
gadget USB: gadget: Remove suspended sysfs file before freeing cdev 2010-12-16 15:45:44 -08:00
host xhci: Fix issue with port array setup and buggy hosts. 2010-12-09 11:59:42 -08:00
image SCSI host lock push-down 2010-11-16 13:33:23 -08:00
misc USB: yurex: add .llseek fop to file_operations 2010-11-30 10:24:50 -08:00
mon BKL: remove extraneous #include <smp_lock.h> 2010-11-17 08:59:32 -08:00
musb usb: musb: do not use dma for control transfers 2010-11-22 12:55:02 +02:00
otg USB: OTG: langwell_otg: fix up some sysfs attribute permissions 2010-11-15 14:04:15 -08:00
serial USB: ftdi_sio: Add D.O.Tec PID 2010-12-10 13:01:52 -08:00
storage USB: usb-storage: unusual_devs entry for the Samsung YP-CP3 2010-12-16 15:45:45 -08:00
wusbcore usb: makefile cleanup 2010-10-22 10:22:07 -07:00
Kconfig USB: add USB EHCI support for MPC5121 SoC 2010-10-22 10:21:58 -07:00
Makefile USB: drivers/usb/Makefile: conditionally descend to 'early' 2010-08-10 14:35:38 -07:00
README
usb-skeleton.c llseek: automatically add .llseek fop 2010-10-15 15:53:27 +02:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.