linux/drivers/scsi/g_NCR5380.h
Ondrej Zary c6084cbce4 ncr5380: Add support for HP C2502
HP C2502 cards (based on 53C400A chips) use different magic numbers for
software-based I/O address configuration than other cards.
The configuration is also extended to allow setting the IRQ.

Move the configuration to a new function magic_configure() and move
magic the magic numbers into an array. Add new magic numbers for these
HP cards and hp_c2502 module parameter to use them, e.g.:
modprobe g_NCR5380 ncr_irq=7 ncr_addr=0x280 hp_c2502=1

Tested with HP C2502 and DTCT-436P.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-01-06 21:43:13 -05:00

95 lines
2.3 KiB
C

/*
* Generic Generic NCR5380 driver defines
*
* Copyright 1993, Drew Eckhardt
* Visionary Computing
* (Unix and Linux consulting and custom programming)
* drew@colorado.edu
* +1 (303) 440-4894
*
* NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin
* K.Lentin@cs.monash.edu.au
*/
#ifndef GENERIC_NCR5380_H
#define GENERIC_NCR5380_H
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define BIOSPARAM
#define NCR5380_BIOSPARAM generic_NCR5380_biosparam
#else
#define NCR5380_BIOSPARAM NULL
#endif
#define __STRVAL(x) #x
#define STRVAL(x) __STRVAL(x)
#ifndef SCSI_G_NCR5380_MEM
#define DRV_MODULE_NAME "g_NCR5380"
#define NCR5380_map_type int
#define NCR5380_map_name port
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define NCR5380_region_size 16
#else
#define NCR5380_region_size 8
#endif
#define NCR5380_read(reg) \
inb(instance->io_port + (reg))
#define NCR5380_write(reg, value) \
outb(value, instance->io_port + (reg))
#define NCR5380_implementation_fields \
int c400_ctl_status; \
int c400_blk_cnt; \
int c400_host_buf; \
int io_width;
#else
/* therefore SCSI_G_NCR5380_MEM */
#define DRV_MODULE_NAME "g_NCR5380_mmio"
#define NCR5380_map_type unsigned long
#define NCR5380_map_name base
#define NCR53C400_mem_base 0x3880
#define NCR53C400_host_buffer 0x3900
#define NCR5380_region_size 0x3a00
#define NCR5380_read(reg) \
readb(((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
NCR53C400_mem_base + (reg))
#define NCR5380_write(reg, value) \
writeb(value, ((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
NCR53C400_mem_base + (reg))
#define NCR5380_implementation_fields \
void __iomem *iomem; \
int c400_ctl_status; \
int c400_blk_cnt; \
int c400_host_buf;
#endif
#define NCR5380_dma_xfer_len(instance, cmd, phase) \
generic_NCR5380_dma_xfer_len(cmd)
#define NCR5380_intr generic_NCR5380_intr
#define NCR5380_queue_command generic_NCR5380_queue_command
#define NCR5380_abort generic_NCR5380_abort
#define NCR5380_bus_reset generic_NCR5380_bus_reset
#define NCR5380_pread generic_NCR5380_pread
#define NCR5380_pwrite generic_NCR5380_pwrite
#define NCR5380_info generic_NCR5380_info
#define NCR5380_show_info generic_NCR5380_show_info
#define BOARD_NCR5380 0
#define BOARD_NCR53C400 1
#define BOARD_NCR53C400A 2
#define BOARD_DTC3181E 3
#define BOARD_HP_C2502 4
#endif /* GENERIC_NCR5380_H */