mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
25b0b9c4e8
When a 32-bit node address is generated from a 128-bit identifier, there is a risk of collisions which must be discovered and handled. We do this as follows: - We don't apply the generated address immediately to the node, but do instead initiate a 1 sec trial period to allow other cluster members to discover and handle such collisions. - During the trial period the node periodically sends out a new type of message, DSC_TRIAL_MSG, using broadcast or emulated broadcast, to all the other nodes in the cluster. - When a node is receiving such a message, it must check that the presented 32-bit identifier either is unused, or was used by the very same peer in a previous session. In both cases it accepts the request by not responding to it. - If it finds that the same node has been up before using a different address, it responds with a DSC_TRIAL_FAIL_MSG containing that address. - If it finds that the address has already been taken by some other node, it generates a new, unused address and returns it to the requester. - During the trial period the requesting node must always be prepared to accept a failure message, i.e., a message where a peer suggests a different (or equal) address to the one tried. In those cases it must apply the suggested value as trial address and restart the trial period. This algorithm ensures that in the vast majority of cases a node will have the same address before and after a reboot. If a legacy user configures the address explicitly, there will be no trial period and messages, so this protocol addition is completely backwards compatible. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
271 lines
8.6 KiB
C
271 lines
8.6 KiB
C
/*
|
|
* net/tipc/net.c: TIPC network routing code
|
|
*
|
|
* Copyright (c) 1995-2006, 2014, Ericsson AB
|
|
* Copyright (c) 2005, 2010-2011, Wind River Systems
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the names of the copyright holders nor the names of its
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "core.h"
|
|
#include "net.h"
|
|
#include "name_distr.h"
|
|
#include "subscr.h"
|
|
#include "socket.h"
|
|
#include "node.h"
|
|
#include "bcast.h"
|
|
#include "netlink.h"
|
|
|
|
/*
|
|
* The TIPC locking policy is designed to ensure a very fine locking
|
|
* granularity, permitting complete parallel access to individual
|
|
* port and node/link instances. The code consists of four major
|
|
* locking domains, each protected with their own disjunct set of locks.
|
|
*
|
|
* 1: The bearer level.
|
|
* RTNL lock is used to serialize the process of configuring bearer
|
|
* on update side, and RCU lock is applied on read side to make
|
|
* bearer instance valid on both paths of message transmission and
|
|
* reception.
|
|
*
|
|
* 2: The node and link level.
|
|
* All node instances are saved into two tipc_node_list and node_htable
|
|
* lists. The two lists are protected by node_list_lock on write side,
|
|
* and they are guarded with RCU lock on read side. Especially node
|
|
* instance is destroyed only when TIPC module is removed, and we can
|
|
* confirm that there has no any user who is accessing the node at the
|
|
* moment. Therefore, Except for iterating the two lists within RCU
|
|
* protection, it's no needed to hold RCU that we access node instance
|
|
* in other places.
|
|
*
|
|
* In addition, all members in node structure including link instances
|
|
* are protected by node spin lock.
|
|
*
|
|
* 3: The transport level of the protocol.
|
|
* This consists of the structures port, (and its user level
|
|
* representations, such as user_port and tipc_sock), reference and
|
|
* tipc_user (port.c, reg.c, socket.c).
|
|
*
|
|
* This layer has four different locks:
|
|
* - The tipc_port spin_lock. This is protecting each port instance
|
|
* from parallel data access and removal. Since we can not place
|
|
* this lock in the port itself, it has been placed in the
|
|
* corresponding reference table entry, which has the same life
|
|
* cycle as the module. This entry is difficult to access from
|
|
* outside the TIPC core, however, so a pointer to the lock has
|
|
* been added in the port instance, -to be used for unlocking
|
|
* only.
|
|
* - A read/write lock to protect the reference table itself (teg.c).
|
|
* (Nobody is using read-only access to this, so it can just as
|
|
* well be changed to a spin_lock)
|
|
* - A spin lock to protect the registry of kernel/driver users (reg.c)
|
|
* - A global spin_lock (tipc_port_lock), which only task is to ensure
|
|
* consistency where more than one port is involved in an operation,
|
|
* i.e., whe a port is part of a linked list of ports.
|
|
* There are two such lists; 'port_list', which is used for management,
|
|
* and 'wait_list', which is used to queue ports during congestion.
|
|
*
|
|
* 4: The name table (name_table.c, name_distr.c, subscription.c)
|
|
* - There is one big read/write-lock (tipc_nametbl_lock) protecting the
|
|
* overall name table structure. Nothing must be added/removed to
|
|
* this structure without holding write access to it.
|
|
* - There is one local spin_lock per sub_sequence, which can be seen
|
|
* as a sub-domain to the tipc_nametbl_lock domain. It is used only
|
|
* for translation operations, and is needed because a translation
|
|
* steps the root of the 'publication' linked list between each lookup.
|
|
* This is always used within the scope of a tipc_nametbl_lock(read).
|
|
* - A local spin_lock protecting the queue of subscriber events.
|
|
*/
|
|
|
|
int tipc_net_init(struct net *net, u8 *node_id, u32 addr)
|
|
{
|
|
if (tipc_own_id(net)) {
|
|
pr_info("Cannot configure node identity twice\n");
|
|
return -1;
|
|
}
|
|
pr_info("Started in network mode\n");
|
|
|
|
if (node_id)
|
|
tipc_set_node_id(net, node_id);
|
|
if (addr)
|
|
tipc_net_finalize(net, addr);
|
|
return 0;
|
|
}
|
|
|
|
void tipc_net_finalize(struct net *net, u32 addr)
|
|
{
|
|
tipc_set_node_addr(net, addr);
|
|
smp_mb();
|
|
tipc_named_reinit(net);
|
|
tipc_sk_reinit(net);
|
|
tipc_nametbl_publish(net, TIPC_CFG_SRV, addr, addr,
|
|
TIPC_CLUSTER_SCOPE, 0, addr);
|
|
}
|
|
|
|
void tipc_net_stop(struct net *net)
|
|
{
|
|
u32 self = tipc_own_addr(net);
|
|
|
|
if (!self)
|
|
return;
|
|
|
|
tipc_nametbl_withdraw(net, TIPC_CFG_SRV, self, 0, self);
|
|
rtnl_lock();
|
|
tipc_bearer_stop(net);
|
|
tipc_node_stop(net);
|
|
rtnl_unlock();
|
|
|
|
pr_info("Left network mode\n");
|
|
}
|
|
|
|
static int __tipc_nl_add_net(struct net *net, struct tipc_nl_msg *msg)
|
|
{
|
|
struct tipc_net *tn = net_generic(net, tipc_net_id);
|
|
u64 *w0 = (u64 *)&tn->node_id[0];
|
|
u64 *w1 = (u64 *)&tn->node_id[8];
|
|
struct nlattr *attrs;
|
|
void *hdr;
|
|
|
|
hdr = genlmsg_put(msg->skb, msg->portid, msg->seq, &tipc_genl_family,
|
|
NLM_F_MULTI, TIPC_NL_NET_GET);
|
|
if (!hdr)
|
|
return -EMSGSIZE;
|
|
|
|
attrs = nla_nest_start(msg->skb, TIPC_NLA_NET);
|
|
if (!attrs)
|
|
goto msg_full;
|
|
|
|
if (nla_put_u32(msg->skb, TIPC_NLA_NET_ID, tn->net_id))
|
|
goto attr_msg_full;
|
|
if (nla_put_u64_64bit(msg->skb, TIPC_NLA_NET_NODEID, *w0, 0))
|
|
goto attr_msg_full;
|
|
if (nla_put_u64_64bit(msg->skb, TIPC_NLA_NET_NODEID_W1, *w1, 0))
|
|
goto attr_msg_full;
|
|
nla_nest_end(msg->skb, attrs);
|
|
genlmsg_end(msg->skb, hdr);
|
|
|
|
return 0;
|
|
|
|
attr_msg_full:
|
|
nla_nest_cancel(msg->skb, attrs);
|
|
msg_full:
|
|
genlmsg_cancel(msg->skb, hdr);
|
|
|
|
return -EMSGSIZE;
|
|
}
|
|
|
|
int tipc_nl_net_dump(struct sk_buff *skb, struct netlink_callback *cb)
|
|
{
|
|
struct net *net = sock_net(skb->sk);
|
|
int err;
|
|
int done = cb->args[0];
|
|
struct tipc_nl_msg msg;
|
|
|
|
if (done)
|
|
return 0;
|
|
|
|
msg.skb = skb;
|
|
msg.portid = NETLINK_CB(cb->skb).portid;
|
|
msg.seq = cb->nlh->nlmsg_seq;
|
|
|
|
err = __tipc_nl_add_net(net, &msg);
|
|
if (err)
|
|
goto out;
|
|
|
|
done = 1;
|
|
out:
|
|
cb->args[0] = done;
|
|
|
|
return skb->len;
|
|
}
|
|
|
|
int __tipc_nl_net_set(struct sk_buff *skb, struct genl_info *info)
|
|
{
|
|
struct nlattr *attrs[TIPC_NLA_NET_MAX + 1];
|
|
struct net *net = sock_net(skb->sk);
|
|
struct tipc_net *tn = tipc_net(net);
|
|
int err;
|
|
|
|
if (!info->attrs[TIPC_NLA_NET])
|
|
return -EINVAL;
|
|
|
|
err = nla_parse_nested(attrs, TIPC_NLA_NET_MAX,
|
|
info->attrs[TIPC_NLA_NET], tipc_nl_net_policy,
|
|
info->extack);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
/* Can't change net id once TIPC has joined a network */
|
|
if (tipc_own_addr(net))
|
|
return -EPERM;
|
|
|
|
if (attrs[TIPC_NLA_NET_ID]) {
|
|
u32 val;
|
|
|
|
val = nla_get_u32(attrs[TIPC_NLA_NET_ID]);
|
|
if (val < 1 || val > 9999)
|
|
return -EINVAL;
|
|
|
|
tn->net_id = val;
|
|
}
|
|
|
|
if (attrs[TIPC_NLA_NET_ADDR]) {
|
|
u32 addr;
|
|
|
|
addr = nla_get_u32(attrs[TIPC_NLA_NET_ADDR]);
|
|
if (!addr)
|
|
return -EINVAL;
|
|
tn->legacy_addr_format = true;
|
|
tipc_net_init(net, NULL, addr);
|
|
}
|
|
|
|
if (attrs[TIPC_NLA_NET_NODEID]) {
|
|
u8 node_id[NODE_ID_LEN];
|
|
u64 *w0 = (u64 *)&node_id[0];
|
|
u64 *w1 = (u64 *)&node_id[8];
|
|
|
|
*w0 = nla_get_u64(attrs[TIPC_NLA_NET_NODEID]);
|
|
*w1 = nla_get_u64(attrs[TIPC_NLA_NET_NODEID_W1]);
|
|
tipc_net_init(net, node_id, 0);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int tipc_nl_net_set(struct sk_buff *skb, struct genl_info *info)
|
|
{
|
|
int err;
|
|
|
|
rtnl_lock();
|
|
err = __tipc_nl_net_set(skb, info);
|
|
rtnl_unlock();
|
|
|
|
return err;
|
|
}
|