linux/arch/arm/mach-s3c64xx/irq.c
Ben Dooks c17afc0aa6 ARM: S3C64XX: Ensure VIC based IRQs can be resumed from
Any interrupts based off either of the onboard VICs cannot be resumed
from any more as it seems set_irq_wake() is now checking the error code
returned from the low level handlers and not setting the wake-state on
the interrupt if this fails.

Ensure that we make the interrupts we can resume from available on the
VIC and then do a pre-sleep mask of all the VIC interrupts as the wakeup
is handled by a seperate block.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20 23:12:22 +09:00

73 lines
1.9 KiB
C

/* arch/arm/plat-s3c64xx/irq.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C64XX - Interrupt handling
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <mach/map.h>
#include <plat/irq-vic-timer.h>
#include <plat/irq-uart.h>
#include <plat/cpu.h>
static struct s3c_uart_irq uart_irqs[] = {
[0] = {
.regs = S3C_VA_UART0,
.base_irq = IRQ_S3CUART_BASE0,
.parent_irq = IRQ_UART0,
},
[1] = {
.regs = S3C_VA_UART1,
.base_irq = IRQ_S3CUART_BASE1,
.parent_irq = IRQ_UART1,
},
[2] = {
.regs = S3C_VA_UART2,
.base_irq = IRQ_S3CUART_BASE2,
.parent_irq = IRQ_UART2,
},
[3] = {
.regs = S3C_VA_UART3,
.base_irq = IRQ_S3CUART_BASE3,
.parent_irq = IRQ_UART3,
},
};
/* setup the sources the vic should advertise resume for, even though it
* is not doing the wake (set_irq_wake needs to be valid) */
#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
{
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
/* initialise the pair of VICs */
vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
/* add the timer sub-irqs */
s3c_init_vic_timer_irq(5, IRQ_TIMER0);
s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
}