linux/drivers/regulator/of_regulator.c
Linus Torvalds 439644096c Power management updates for v4.14-rc1
- Drop the P-state selection algorithm based on a PID controller
    from intel_pstate and make it use the same P-state selection
    method (based on the CPU load) for all types of systems in the
    active mode (Rafael Wysocki, Srinivas Pandruvada).
 
  - Rework the cpufreq core and governors to make it possible to
    take cross-CPU utilization updates into account and modify the
    schedutil governor to actually do so (Viresh Kumar).
 
  - Clean up the handling of transition latency information in the
    cpufreq core and untangle it from the information on which drivers
    cannot do dynamic frequency switching (Viresh Kumar).
 
  - Add support for new SoCs (MT2701/MT7623 and MT7622) to the
    mediatek cpufreq driver and update its DT bindings (Sean Wang).
 
  - Modify the cpufreq dt-platdev driver to autimatically create
    cpufreq devices for the new (v2) Operating Performance Points
    (OPP) DT bindings and update its whitelist of supported systems
    (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen,
    Finley Xiao).
 
  - Add support for Ux500 to the cpufreq-dt driver and drop the
    obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).
 
  - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
    Nguyen).
 
  - Fix and clean up assorted issues in the cpufreq drivers and core
    (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
    Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).
 
  - Update the IO-wait boost handling in the schedutil governor to
    make it less aggressive (Joel Fernandes).
 
  - Rework system suspend diagnostics to make it print fewer messages
    to the kernel log by default, add a sysfs knob to allow more
    suspend-related messages to be printed and add Low Power S0 Idle
    constraints checks to the ACPI suspend-to-idle code (Rafael
    Wysocki, Srinivas Pandruvada).
 
  - Prefer suspend-to-idle over S3 on ACPI-based systems with the
    ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
    interface present in the ACPI tables (Rafael Wysocki).
 
  - Update documentation related to system sleep and rename a number
    of items in the code to make it cleare that they are related to
    suspend-to-idle (Rafael Wysocki).
 
  - Export a variable allowing device drivers to check the target
    system sleep state from the core system suspend code (Florian
    Fainelli).
 
  - Clean up the cpuidle subsystem to handle the polling state on
    x86 in a more straightforward way and to use %pOF instead of
    full_name (Rafael Wysocki, Rob Herring).
 
  - Update the devfreq framework to fix and clean up a few minor
    issues (Chanwoo Choi, Rob Herring).
 
  - Extend diagnostics in the generic power domains (genpd) framework
    and clean it up slightly (Thara Gopinath, Rob Herring).
 
  - Fix and clean up a couple of issues in the operating performance
    points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).
 
  - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
    (AVS) driver (David Wu).
 
  - Fix the usage of notifiers in CPU power management on some
    platforms (Alex Shi).
 
  - Update the pm-graph system suspend/hibernation and boot profiling
    utility (Todd Brandt).
 
  - Make it possible to run the cpupower utility without CPU0 (Prarit
    Bhargava).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZrcDJAAoJEILEb/54YlRx9FUQAIUKvWBAARc61ZIZXjbqZF1v
 aEMOBuksFns0CMekdptSic6n4wc81E/XYMS8yDhOOMpyDzfAZsTWjmu+gKwN7w3l
 E/yf/NVlhob9JZ7MqGgqD4EUFfFIaKBXPlWFdDi2rdCUXE2L8xJ7rla8i7zyZlc5
 pYHfAppBbF4qUcEY4OoOVOOGRZCfMdiLXj0iZOhMX8Y6yLBRk/AjnVADYsF33hoj
 gBEfomU+H0K5V8nQEp0ZFKDArPwL+oElHQj6i+nxBpGfPM5evvLXhHOyR6AsldJ5
 J4YI1kMuQNSCmvHMqOTxTYyJf8Jcf3Fj4wcjwaVMVGceY1lz6McAKknnFnCqCvz+
 mskn84gFCBCM8EoJDqRf0b9MQHcuRyQKM+yw4tjnR9r8yd32erb85ZWFHcPWYhCT
 fZatNOwFFv2MU+2vo5J3yeUNSWIKT+uBjy+tKPbrDkUwpKZVRj3Oj+hP3Mq9NE8U
 YBqltsj7tmrdA634zI8C7jfS6wF221S0fId/iPszwmPJaVn/lq8Ror7pWL5YI8U7
 SCJFjiqDiGmAcQEkuWwFAQnscZkyHpO+Y3A+jfXl/izoaZETaI5+ceIHBaocm3+5
 XrOOpHS3ik8EHf9ji0KFCKZ/pYDwllday3cBQPWo3sMIzpQ2lrjbqdnE1cVnBrld
 OtHZAeD/jLUXuY6XW2jN
 =mAiV
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "This time (again) cpufreq gets the majority of changes which mostly
  are driver updates (including a major consolidation of intel_pstate),
  some schedutil governor modifications and core cleanups.

  There also are some changes in the system suspend area, mostly related
  to diagnostics and debug messages plus some renames of things related
  to suspend-to-idle. One major change here is that suspend-to-idle is
  now going to be preferred over S3 on systems where the ACPI tables
  indicate to do so and provide requsite support (the Low Power Idle S0
  _DSM in particular). The system sleep documentation and the tools
  related to it are updated too.

  The rest is a few cpuidle changes (nothing major), devfreq updates,
  generic power domains (genpd) framework updates and a few assorted
  modifications elsewhere.

  Specifics:

   - Drop the P-state selection algorithm based on a PID controller from
     intel_pstate and make it use the same P-state selection method
     (based on the CPU load) for all types of systems in the active mode
     (Rafael Wysocki, Srinivas Pandruvada).

   - Rework the cpufreq core and governors to make it possible to take
     cross-CPU utilization updates into account and modify the schedutil
     governor to actually do so (Viresh Kumar).

   - Clean up the handling of transition latency information in the
     cpufreq core and untangle it from the information on which drivers
     cannot do dynamic frequency switching (Viresh Kumar).

   - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek
     cpufreq driver and update its DT bindings (Sean Wang).

   - Modify the cpufreq dt-platdev driver to autimatically create
     cpufreq devices for the new (v2) Operating Performance Points (OPP)
     DT bindings and update its whitelist of supported systems (Viresh
     Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley
     Xiao).

   - Add support for Ux500 to the cpufreq-dt driver and drop the
     obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).

   - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
     Nguyen).

   - Fix and clean up assorted issues in the cpufreq drivers and core
     (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
     Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).

   - Update the IO-wait boost handling in the schedutil governor to make
     it less aggressive (Joel Fernandes).

   - Rework system suspend diagnostics to make it print fewer messages
     to the kernel log by default, add a sysfs knob to allow more
     suspend-related messages to be printed and add Low Power S0 Idle
     constraints checks to the ACPI suspend-to-idle code (Rafael
     Wysocki, Srinivas Pandruvada).

   - Prefer suspend-to-idle over S3 on ACPI-based systems with the
     ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
     interface present in the ACPI tables (Rafael Wysocki).

   - Update documentation related to system sleep and rename a number of
     items in the code to make it cleare that they are related to
     suspend-to-idle (Rafael Wysocki).

   - Export a variable allowing device drivers to check the target
     system sleep state from the core system suspend code (Florian
     Fainelli).

   - Clean up the cpuidle subsystem to handle the polling state on x86
     in a more straightforward way and to use %pOF instead of full_name
     (Rafael Wysocki, Rob Herring).

   - Update the devfreq framework to fix and clean up a few minor issues
     (Chanwoo Choi, Rob Herring).

   - Extend diagnostics in the generic power domains (genpd) framework
     and clean it up slightly (Thara Gopinath, Rob Herring).

   - Fix and clean up a couple of issues in the operating performance
     points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).

   - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
     (AVS) driver (David Wu).

   - Fix the usage of notifiers in CPU power management on some
     platforms (Alex Shi).

   - Update the pm-graph system suspend/hibernation and boot profiling
     utility (Todd Brandt).

   - Make it possible to run the cpupower utility without CPU0 (Prarit
     Bhargava)"

* tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits)
  cpuidle: Make drivers initialize polling state
  cpuidle: Move polling state initialization code to separate file
  cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol
  cpufreq: imx6q: Fix imx6sx low frequency support
  cpufreq: speedstep-lib: make several arrays static, makes code smaller
  PM: docs: Delete the obsolete states.txt document
  PM: docs: Describe high-level PM strategies and sleep states
  PM / devfreq: Fix memory leak when fail to register device
  PM / devfreq: Add dependency on PM_OPP
  PM / devfreq: Move private devfreq_update_stats() into devfreq
  PM / devfreq: Convert to using %pOF instead of full_name
  PM / AVS: rockchip-io: add io selectors and supplies for RV1108
  cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
  cpufreq: dt-platdev: Drop few entries from whitelist
  cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
  ARM: ux500: don't select CPUFREQ_DT
  cpuidle: Convert to using %pOF instead of full_name
  cpufreq: Convert to using %pOF instead of full_name
  PM / Domains: Convert to using %pOF instead of full_name
  cpufreq: Cap the default transition delay value to 10 ms
  ...
2017-09-05 12:19:08 -07:00

379 lines
11 KiB
C

/*
* OF helpers for regulator framework
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#include "internal.h"
static const char *const regulator_states[PM_SUSPEND_MAX + 1] = {
[PM_SUSPEND_MEM] = "regulator-state-mem",
[PM_SUSPEND_MAX] = "regulator-state-disk",
};
static void of_get_regulation_constraints(struct device_node *np,
struct regulator_init_data **init_data,
const struct regulator_desc *desc)
{
struct regulation_constraints *constraints = &(*init_data)->constraints;
struct regulator_state *suspend_state;
struct device_node *suspend_np;
int ret, i;
u32 pval;
constraints->name = of_get_property(np, "regulator-name", NULL);
if (!of_property_read_u32(np, "regulator-min-microvolt", &pval))
constraints->min_uV = pval;
if (!of_property_read_u32(np, "regulator-max-microvolt", &pval))
constraints->max_uV = pval;
/* Voltage change possible? */
if (constraints->min_uV != constraints->max_uV)
constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
/* Do we have a voltage range, if so try to apply it? */
if (constraints->min_uV && constraints->max_uV)
constraints->apply_uV = true;
if (!of_property_read_u32(np, "regulator-microvolt-offset", &pval))
constraints->uV_offset = pval;
if (!of_property_read_u32(np, "regulator-min-microamp", &pval))
constraints->min_uA = pval;
if (!of_property_read_u32(np, "regulator-max-microamp", &pval))
constraints->max_uA = pval;
if (!of_property_read_u32(np, "regulator-input-current-limit-microamp",
&pval))
constraints->ilim_uA = pval;
/* Current change possible? */
if (constraints->min_uA != constraints->max_uA)
constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT;
constraints->boot_on = of_property_read_bool(np, "regulator-boot-on");
constraints->always_on = of_property_read_bool(np, "regulator-always-on");
if (!constraints->always_on) /* status change should be possible. */
constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS;
constraints->pull_down = of_property_read_bool(np, "regulator-pull-down");
if (of_property_read_bool(np, "regulator-allow-bypass"))
constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS;
if (of_property_read_bool(np, "regulator-allow-set-load"))
constraints->valid_ops_mask |= REGULATOR_CHANGE_DRMS;
ret = of_property_read_u32(np, "regulator-ramp-delay", &pval);
if (!ret) {
if (pval)
constraints->ramp_delay = pval;
else
constraints->ramp_disable = true;
}
ret = of_property_read_u32(np, "regulator-settling-time-us", &pval);
if (!ret)
constraints->settling_time = pval;
ret = of_property_read_u32(np, "regulator-settling-time-up-us", &pval);
if (!ret)
constraints->settling_time_up = pval;
if (constraints->settling_time_up && constraints->settling_time) {
pr_warn("%s: ambiguous configuration for settling time, ignoring 'regulator-settling-time-up-us'\n",
np->name);
constraints->settling_time_up = 0;
}
ret = of_property_read_u32(np, "regulator-settling-time-down-us",
&pval);
if (!ret)
constraints->settling_time_down = pval;
if (constraints->settling_time_down && constraints->settling_time) {
pr_warn("%s: ambiguous configuration for settling time, ignoring 'regulator-settling-time-down-us'\n",
np->name);
constraints->settling_time_down = 0;
}
ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval);
if (!ret)
constraints->enable_time = pval;
constraints->soft_start = of_property_read_bool(np,
"regulator-soft-start");
ret = of_property_read_u32(np, "regulator-active-discharge", &pval);
if (!ret) {
constraints->active_discharge =
(pval) ? REGULATOR_ACTIVE_DISCHARGE_ENABLE :
REGULATOR_ACTIVE_DISCHARGE_DISABLE;
}
if (!of_property_read_u32(np, "regulator-initial-mode", &pval)) {
if (desc && desc->of_map_mode) {
ret = desc->of_map_mode(pval);
if (ret == -EINVAL)
pr_err("%s: invalid mode %u\n", np->name, pval);
else
constraints->initial_mode = ret;
} else {
pr_warn("%s: mapping for mode %d not defined\n",
np->name, pval);
}
}
if (!of_property_read_u32(np, "regulator-system-load", &pval))
constraints->system_load = pval;
constraints->over_current_protection = of_property_read_bool(np,
"regulator-over-current-protection");
for (i = 0; i < ARRAY_SIZE(regulator_states); i++) {
switch (i) {
case PM_SUSPEND_MEM:
suspend_state = &constraints->state_mem;
break;
case PM_SUSPEND_MAX:
suspend_state = &constraints->state_disk;
break;
case PM_SUSPEND_ON:
case PM_SUSPEND_TO_IDLE:
case PM_SUSPEND_STANDBY:
default:
continue;
}
suspend_np = of_get_child_by_name(np, regulator_states[i]);
if (!suspend_np || !suspend_state)
continue;
if (!of_property_read_u32(suspend_np, "regulator-mode",
&pval)) {
if (desc && desc->of_map_mode) {
ret = desc->of_map_mode(pval);
if (ret == -EINVAL)
pr_err("%s: invalid mode %u\n",
np->name, pval);
else
suspend_state->mode = ret;
} else {
pr_warn("%s: mapping for mode %d not defined\n",
np->name, pval);
}
}
if (of_property_read_bool(suspend_np,
"regulator-on-in-suspend"))
suspend_state->enabled = true;
else if (of_property_read_bool(suspend_np,
"regulator-off-in-suspend"))
suspend_state->disabled = true;
if (!of_property_read_u32(suspend_np,
"regulator-suspend-microvolt", &pval))
suspend_state->uV = pval;
if (i == PM_SUSPEND_MEM)
constraints->initial_state = PM_SUSPEND_MEM;
of_node_put(suspend_np);
suspend_state = NULL;
suspend_np = NULL;
}
}
/**
* of_get_regulator_init_data - extract regulator_init_data structure info
* @dev: device requesting for regulator_init_data
* @node: regulator device node
* @desc: regulator description
*
* Populates regulator_init_data structure by extracting data from device
* tree node, returns a pointer to the populated struture or NULL if memory
* alloc fails.
*/
struct regulator_init_data *of_get_regulator_init_data(struct device *dev,
struct device_node *node,
const struct regulator_desc *desc)
{
struct regulator_init_data *init_data;
if (!node)
return NULL;
init_data = devm_kzalloc(dev, sizeof(*init_data), GFP_KERNEL);
if (!init_data)
return NULL; /* Out of memory? */
of_get_regulation_constraints(node, &init_data, desc);
return init_data;
}
EXPORT_SYMBOL_GPL(of_get_regulator_init_data);
struct devm_of_regulator_matches {
struct of_regulator_match *matches;
unsigned int num_matches;
};
static void devm_of_regulator_put_matches(struct device *dev, void *res)
{
struct devm_of_regulator_matches *devm_matches = res;
int i;
for (i = 0; i < devm_matches->num_matches; i++)
of_node_put(devm_matches->matches[i].of_node);
}
/**
* of_regulator_match - extract multiple regulator init data from device tree.
* @dev: device requesting the data
* @node: parent device node of the regulators
* @matches: match table for the regulators
* @num_matches: number of entries in match table
*
* This function uses a match table specified by the regulator driver to
* parse regulator init data from the device tree. @node is expected to
* contain a set of child nodes, each providing the init data for one
* regulator. The data parsed from a child node will be matched to a regulator
* based on either the deprecated property regulator-compatible if present,
* or otherwise the child node's name. Note that the match table is modified
* in place and an additional of_node reference is taken for each matched
* regulator.
*
* Returns the number of matches found or a negative error code on failure.
*/
int of_regulator_match(struct device *dev, struct device_node *node,
struct of_regulator_match *matches,
unsigned int num_matches)
{
unsigned int count = 0;
unsigned int i;
const char *name;
struct device_node *child;
struct devm_of_regulator_matches *devm_matches;
if (!dev || !node)
return -EINVAL;
devm_matches = devres_alloc(devm_of_regulator_put_matches,
sizeof(struct devm_of_regulator_matches),
GFP_KERNEL);
if (!devm_matches)
return -ENOMEM;
devm_matches->matches = matches;
devm_matches->num_matches = num_matches;
devres_add(dev, devm_matches);
for (i = 0; i < num_matches; i++) {
struct of_regulator_match *match = &matches[i];
match->init_data = NULL;
match->of_node = NULL;
}
for_each_child_of_node(node, child) {
name = of_get_property(child,
"regulator-compatible", NULL);
if (!name)
name = child->name;
for (i = 0; i < num_matches; i++) {
struct of_regulator_match *match = &matches[i];
if (match->of_node)
continue;
if (strcmp(match->name, name))
continue;
match->init_data =
of_get_regulator_init_data(dev, child,
match->desc);
if (!match->init_data) {
dev_err(dev,
"failed to parse DT for regulator %s\n",
child->name);
return -EINVAL;
}
match->of_node = of_node_get(child);
count++;
break;
}
}
return count;
}
EXPORT_SYMBOL_GPL(of_regulator_match);
struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
const struct regulator_desc *desc,
struct regulator_config *config,
struct device_node **node)
{
struct device_node *search, *child;
struct regulator_init_data *init_data = NULL;
const char *name;
if (!dev->of_node || !desc->of_match)
return NULL;
if (desc->regulators_node)
search = of_get_child_by_name(dev->of_node,
desc->regulators_node);
else
search = of_node_get(dev->of_node);
if (!search) {
dev_dbg(dev, "Failed to find regulator container node '%s'\n",
desc->regulators_node);
return NULL;
}
for_each_available_child_of_node(search, child) {
name = of_get_property(child, "regulator-compatible", NULL);
if (!name)
name = child->name;
if (strcmp(desc->of_match, name))
continue;
init_data = of_get_regulator_init_data(dev, child, desc);
if (!init_data) {
dev_err(dev,
"failed to parse DT for regulator %s\n",
child->name);
break;
}
if (desc->of_parse_cb) {
if (desc->of_parse_cb(child, desc, config)) {
dev_err(dev,
"driver callback failed to parse DT for regulator %s\n",
child->name);
init_data = NULL;
break;
}
}
of_node_get(child);
*node = child;
break;
}
of_node_put(search);
return init_data;
}