linux/arch/arm/boot/dts/wm8650.dtsi
Alexey Charkov 2d283862dc net: via-rhine: add OF bus binding
This should make the driver usable with VIA/WonderMedia ARM-based
Systems-on-Chip integrated Rhine III adapters. Note that these
are always in MMIO mode, and don't have any known EEPROM.

Signed-off-by: Alexey Charkov <alchark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23 15:24:06 -04:00

229 lines
4.4 KiB
Plaintext

/*
* wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC
*
* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
*
* Licensed under GPLv2 or later
*/
/include/ "skeleton.dtsi"
/ {
compatible = "wm,wm8650";
cpus {
#address-cells = <0>;
#size-cells = <0>;
cpu {
device_type = "cpu";
compatible = "arm,arm926ej-s";
};
};
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
interrupt-parent = <&intc0>;
intc0: interrupt-controller@d8140000 {
compatible = "via,vt8500-intc";
interrupt-controller;
reg = <0xd8140000 0x10000>;
#interrupt-cells = <1>;
};
/* Secondary IC cascaded to intc0 */
intc1: interrupt-controller@d8150000 {
compatible = "via,vt8500-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0xD8150000 0x10000>;
interrupts = <56 57 58 59 60 61 62 63>;
};
pinctrl: pinctrl@d8110000 {
compatible = "wm,wm8650-pinctrl";
reg = <0xd8110000 0x10000>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
pmc@d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
ref25: ref25M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
};
ref24: ref24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
plla: plla {
#clock-cells = <0>;
compatible = "wm,wm8650-pll-clock";
clocks = <&ref25>;
reg = <0x200>;
};
pllb: pllb {
#clock-cells = <0>;
compatible = "wm,wm8650-pll-clock";
clocks = <&ref25>;
reg = <0x204>;
};
pllc: pllc {
#clock-cells = <0>;
compatible = "wm,wm8650-pll-clock";
clocks = <&ref25>;
reg = <0x208>;
};
plld: plld {
#clock-cells = <0>;
compatible = "wm,wm8650-pll-clock";
clocks = <&ref25>;
reg = <0x20c>;
};
plle: plle {
#clock-cells = <0>;
compatible = "wm,wm8650-pll-clock";
clocks = <&ref25>;
reg = <0x210>;
};
clkarm: arm {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&plla>;
divisor-reg = <0x300>;
};
clkahb: ahb {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
divisor-reg = <0x304>;
};
clkapb: apb {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
divisor-reg = <0x320>;
};
clkddr: ddr {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&plld>;
divisor-reg = <0x310>;
};
clkuart0: uart0 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <1>;
};
clkuart1: uart1 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <2>;
};
clksdhc: sdhc {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
divisor-reg = <0x328>;
divisor-mask = <0x3f>;
enable-reg = <0x254>;
enable-bit = <18>;
};
};
};
timer@d8130100 {
compatible = "via,vt8500-timer";
reg = <0xd8130100 0x28>;
interrupts = <36>;
};
ehci@d8007900 {
compatible = "via,vt8500-ehci";
reg = <0xd8007900 0x200>;
interrupts = <43>;
};
uhci@d8007b00 {
compatible = "platform-uhci";
reg = <0xd8007b00 0x200>;
interrupts = <43>;
};
fb: fb@d8050800 {
compatible = "wm,wm8505-fb";
reg = <0xd8050800 0x200>;
};
ge_rops@d8050400 {
compatible = "wm,prizm-ge-rops";
reg = <0xd8050400 0x100>;
};
uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
status = "disabled";
};
uart1: serial@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
status = "disabled";
};
rtc@d8100000 {
compatible = "via,vt8500-rtc";
reg = <0xd8100000 0x10000>;
interrupts = <48>;
};
ethernet@d8004000 {
compatible = "via,vt8500-rhine";
reg = <0xd8004000 0x100>;
interrupts = <10>;
};
};
};