linux/arch/arm/boot/dts/kirkwood-dreamplug.dts
Olof Johansson 61e810d364 mvebu DT changes for v3.16
- kirkwood
     - rework nsa3x0 board to add nsa320
     - large cleanup to facilitate use in barebox
     - guruplug phy updates
     - audio updates for t5325
 
  - mvebu
     - use clocks vice clock-frequency for uart nodes
 
     - armada 375/380/385
        - add watchdog node
        - add coherency fabric
        - add smp support
        - add sdhci
        - add ahci
        - add thermal sensor
 
     - armada 370/XP
        - and pmsu
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTa6c8AAoJEP45WPkGe8ZnwB8P/0jFC/tWujz/ndmri/lx8+pi
 rRzyuHg2MCG81lAsJD2dvCh1IWqSg4YM3JWGjiqTNDVn526iVnp9FuJ8SmLiursL
 KG0P1CX+uFqXY181DZBi1OFy3bIz2T/brrA48r6tAVoO3IiZ9v5UnaNz/QokCM+Z
 Yrx1d8sSi5i5/1IqycPOS6TpZ9WcKXAgJFPv7FnvPtKnOxWir7lMW609zCdc54yg
 vx/UQiBIMqgsgNYnwHIe4CjRcjgrg6f4i1Y10XHFK++w3vo9B4lZM67FKfv/Lslq
 z7zWC74v5/lA+SBW5Wb9fWqRxdMEcg8AtA1gQ4qc5phMrVSUZwFRp701goCLhf8j
 t9Hmf5fcVoVLGDTpbcoCuXYCD512VwP5/rv3OtrJ8hGiCajt7JegiRd66TgM6YhQ
 awf2Ss3xEWsmDjSijKN4/zJfn9zzCFwRjdsjBrpXDmi8XH73Obt2Hug/koa1rr86
 wFynL2KWkAmetPXFutOkU17zeOPZ4fs/oloCxpRO2jC8gaWLImO0jiCyMFZYEI4K
 bhIQjhD/rGPPnc4QyQ6Zln9f055tSlH/k5jycp2sGvqmbefTGawvLozi11wu1TXa
 aUeT3dRzXiK4qFn54YkgHwRM6Kp/pZMRXeeW9N27at+/CE9TIE1ZfR4jrTiXf7XS
 70CTD4ElIKbA7fI5gXnS
 =qPr0
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu into next/dt

Merge "ARM: mvebu: DT changes for v3.16" from Jason Cooper:

mvebu DT changes for v3.16

 - kirkwood
    - rework nsa3x0 board to add nsa320
    - large cleanup to facilitate use in barebox
    - guruplug phy updates
    - audio updates for t5325

 - mvebu
    - use clocks vice clock-frequency for uart nodes

    - armada 375/380/385
       - add watchdog node
       - add coherency fabric
       - add smp support
       - add sdhci
       - add ahci
       - add thermal sensor

    - armada 370/XP
       - and pmsu

* tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits)
  ARM: Kirkwood: t5325: Use simple card to instantiate audio
  ARM: Kirkwood: DT: Add missing #sound-dai-cells property
  ARM: Kirkwood: Add node for audio codec
  ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id
  ARM: dts: kirkwood: set Guruplug ethernet PHY compatible
  ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
  ARM: dts: kirkwood: set default pinctrl for I2C0
  ARM: dts: kirkwood: set default pinctrl for NAND
  ARM: dts: kirkwood: set default pinctrl for SPI0
  ARM: dts: kirkwood: set default pinctrl for UART0/1
  ARM: dts: kirkwood: set default pinctrl for GBE1
  ARM: dts: kirkwood: consolidate common pinctrl settings
  ARM: dts: kirkwood: add pinctrl node to common SoC include
  ARM: dts: kirkwood: rename pin-controller nodes
  ARM: dts: kirkwood: remove clock-frequency properties from UART nodes
  ARM: dts: kirkwood: add stdout-path property to all boards
  ARM: dts: kirkwood: add node labels
  ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC
  ARM: mvebu: Enable the thermal sensor in Armada 375 SoC
  ARM: mvebu: don't use clocks property in UART node for Netgear RN2120
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-19 21:55:03 -07:00

127 lines
2.1 KiB
Plaintext

/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Globalscale Technologies Dreamplug";
compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_led_bluetooth: pmx-led-bluetooth {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_led_wifi: pmx-led-wifi {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
pmx_led_wifi_ap: pmx-led-wifi-ap {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
spi@10600 {
status = "okay";
m25p40@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mxicy,mx25l1606e";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
partition@0 {
reg = <0x0 0x80000>;
label = "u-boot";
};
partition@100000 {
reg = <0x100000 0x10000>;
label = "u-boot env";
};
partition@180000 {
reg = <0x180000 0x10000>;
label = "dtb";
};
};
};
sata@80000 {
status = "okay";
nr-ports = <1>;
};
mvsdio@90000 {
pinctrl-0 = <&pmx_sdio>;
pinctrl-names = "default";
status = "okay";
/* No CD or WP GPIOs */
broken-cd;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
&pmx_led_wifi_ap >;
pinctrl-names = "default";
bluetooth {
label = "dreamplug:blue:bluetooth";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
wifi {
label = "dreamplug:green:wifi";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
wifi-ap {
label = "dreamplug:green:wifi_ap";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@1 {
reg = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};