linux/include/asm-ia64/hw_irq.h
Kenji Kaneshige 24eeb568ae [IA64] vector sharing (Large I/O system support)
Current ia64 linux cannot handle greater than 184 interrupt sources
because of the lack of vectors. The following patch enables ia64 linux
to handle greater than 184 interrupt sources by allowing the same
vector number to be shared by multiple IOSAPIC's RTEs. The design of
this patch is besed on "Intel(R) Itanium(R) Processor Family Interrupt
Architecture Guide".

Even if you don't have a large I/O system, you can see the behavior of
vector sharing by changing IOSAPIC_LAST_DEVICE_VECTOR to fewer value.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25 13:26:23 -07:00

146 lines
4.4 KiB
C

#ifndef _ASM_IA64_HW_IRQ_H
#define _ASM_IA64_HW_IRQ_H
/*
* Copyright (C) 2001-2003 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/profile.h>
#include <asm/machvec.h>
#include <asm/ptrace.h>
#include <asm/smp.h>
typedef u8 ia64_vector;
/*
* 0 special
*
* 1,3-14 are reserved from firmware
*
* 16-255 (vectored external interrupts) are available
*
* 15 spurious interrupt (see IVR)
*
* 16 lowest priority, 255 highest priority
*
* 15 classes of 16 interrupts each.
*/
#define IA64_MIN_VECTORED_IRQ 16
#define IA64_MAX_VECTORED_IRQ 255
#define IA64_NUM_VECTORS 256
#define AUTO_ASSIGN -1
#define IA64_SPURIOUS_INT_VECTOR 0x0f
/*
* Vectors 0x10-0x1f are used for low priority interrupts, e.g. CMCI.
*/
#define IA64_CPEP_VECTOR 0x1c /* corrected platform error polling vector */
#define IA64_CMCP_VECTOR 0x1d /* corrected machine-check polling vector */
#define IA64_CPE_VECTOR 0x1e /* corrected platform error interrupt vector */
#define IA64_CMC_VECTOR 0x1f /* corrected machine-check interrupt vector */
/*
* Vectors 0x20-0x2f are reserved for legacy ISA IRQs.
*/
#define IA64_FIRST_DEVICE_VECTOR 0x30
#define IA64_LAST_DEVICE_VECTOR 0xe7
#define IA64_NUM_DEVICE_VECTORS (IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
#define IA64_MCA_RENDEZ_VECTOR 0xe8 /* MCA rendez interrupt */
#define IA64_PERFMON_VECTOR 0xee /* performanc monitor interrupt vector */
#define IA64_TIMER_VECTOR 0xef /* use highest-prio group 15 interrupt for timer */
#define IA64_MCA_WAKEUP_VECTOR 0xf0 /* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
#define IA64_IPI_RESCHEDULE 0xfd /* SMP reschedule */
#define IA64_IPI_VECTOR 0xfe /* inter-processor interrupt vector */
/* Used for encoding redirected irqs */
#define IA64_IRQ_REDIRECTED (1 << 31)
/* IA64 inter-cpu interrupt related definitions */
#define IA64_IPI_DEFAULT_BASE_ADDR 0xfee00000
/* Delivery modes for inter-cpu interrupts */
enum {
IA64_IPI_DM_INT = 0x0, /* pend an external interrupt */
IA64_IPI_DM_PMI = 0x2, /* pend a PMI */
IA64_IPI_DM_NMI = 0x4, /* pend an NMI (vector 2) */
IA64_IPI_DM_INIT = 0x5, /* pend an INIT interrupt */
IA64_IPI_DM_EXTINT = 0x7, /* pend an 8259-compatible interrupt. */
};
extern __u8 isa_irq_to_vector_map[16];
#define isa_irq_to_vector(x) isa_irq_to_vector_map[(x)]
extern struct hw_interrupt_type irq_type_ia64_lsapic; /* CPU-internal interrupt controller */
extern int assign_irq_vector_nopanic (int irq); /* allocate a free vector without panic */
extern int assign_irq_vector (int irq); /* allocate a free vector */
extern void free_irq_vector (int vector);
extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect);
extern void register_percpu_irq (ia64_vector vec, struct irqaction *action);
static inline void
hw_resend_irq (struct hw_interrupt_type *h, unsigned int vector)
{
platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
}
/*
* Default implementations for the irq-descriptor API:
*/
extern irq_desc_t irq_desc[NR_IRQS];
#ifndef CONFIG_IA64_GENERIC
static inline unsigned int
__ia64_local_vector_to_irq (ia64_vector vec)
{
return (unsigned int) vec;
}
#endif
/*
* Next follows the irq descriptor interface. On IA-64, each CPU supports 256 interrupt
* vectors. On smaller systems, there is a one-to-one correspondence between interrupt
* vectors and the Linux irq numbers. However, larger systems may have multiple interrupt
* domains meaning that the translation from vector number to irq number depends on the
* interrupt domain that a CPU belongs to. This API abstracts such platform-dependent
* differences and provides a uniform means to translate between vector and irq numbers
* and to obtain the irq descriptor for a given irq number.
*/
/* Return a pointer to the irq descriptor for IRQ. */
static inline irq_desc_t *
irq_descp (int irq)
{
return irq_desc + irq;
}
/* Extract the IA-64 vector that corresponds to IRQ. */
static inline ia64_vector
irq_to_vector (int irq)
{
return (ia64_vector) irq;
}
/*
* Convert the local IA-64 vector to the corresponding irq number. This translation is
* done in the context of the interrupt domain that the currently executing CPU belongs
* to.
*/
static inline unsigned int
local_vector_to_irq (ia64_vector vec)
{
return platform_local_vector_to_irq(vec);
}
#endif /* _ASM_IA64_HW_IRQ_H */