linux/arch/arm/boot/dts/kirkwood-mplcec4.dts
Sebastian Hesselbarth cbfaea96ac ARM: dts: kirkwood: set default pinctrl for NAND
There is only one valid pinctrl setting for NAND on Kirkwood. Now that we
have the setting in the common SoC pinctrl, move it to the NAND controller
node directly and remove it from the individual boards.

While at it, also fix up status = "okay" to "ok" on one board's NAND node.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-12-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05 00:53:06 +00:00

218 lines
3.5 KiB
Plaintext

/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "MPL CEC4";
compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
mbus {
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_led_health: pmx-led-health {
marvell,pins = "mpp7";
marvell,function = "gpo";
};
pmx_sata1: pmx-sata1 {
marvell,pins = "mpp34";
marvell,function = "sata1";
};
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp35";
marvell,function = "sata0";
};
pmx_led_user1o: pmx-led-user1o {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_led_user1g: pmx-led-user1g {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_led_user0o: pmx-led-user0o {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_led_user0g: pmx-led-user0g {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_led_misc: pmx-led-misc {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_sdio_cd: pmx-sdio-cd {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
i2c@11000 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
eeprom@57 {
compatible = "atmel,24c02";
reg = <0x57>;
};
};
serial@12000 {
status = "okay";
};
rtc@10300 {
status = "disabled";
};
sata@80000 {
pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
pinctrl-names = "default";
nr-ports = <2>;
status = "okay";
};
mvsdio@90000 {
pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
pinctrl-names = "default";
status = "okay";
cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
/* No WP GPIO */
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = < &pmx_led_health
&pmx_led_user1o
&pmx_led_user1g &pmx_led_user0o
&pmx_led_user0g &pmx_led_misc
>;
pinctrl-names = "default";
health {
label = "status:green:health";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
user1o {
label = "user1:orange";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user1g {
label = "user1:green";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user0o {
label = "user0:orange";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user0g {
label = "user0:green";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
misc {
label = "status:orange:misc";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
};
&nand {
status = "okay";
partition@0 {
label = "uboot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "fdt";
reg = <0x180000 0x80000>;
};
partition@200000 {
label = "kernel";
reg = <0x200000 0x400000>;
};
partition@600000 {
label = "rootfs";
reg = <0x600000 0x1fa00000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@1 {
reg = <1>;
};
ethphy1: ethernet-phy@2 {
reg = <2>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};