linux/drivers/phy/phy-berlin-usb.c
Axel Lin 739ae3452d phy: berlin-usb: Set drvdata for phy and use it
At the context where we have pointer to struct phy, it's useful to call
phy_get_drvdata() to get the address of priv. With this change, we can
remove the to_phy_berlin_usb_priv() macro and remove *phy from struct
phy_berlin_usb_priv.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10 17:18:09 +05:30

219 lines
6.2 KiB
C

/*
* Copyright (C) 2014 Marvell Technology Group Ltd.
*
* Antoine Tenart <antoine.tenart@free-electrons.com>
* Jisheng Zhang <jszhang@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#define USB_PHY_PLL 0x04
#define USB_PHY_PLL_CONTROL 0x08
#define USB_PHY_TX_CTRL0 0x10
#define USB_PHY_TX_CTRL1 0x14
#define USB_PHY_TX_CTRL2 0x18
#define USB_PHY_RX_CTRL 0x20
#define USB_PHY_ANALOG 0x34
/* USB_PHY_PLL */
#define CLK_REF_DIV(x) ((x) << 4)
#define FEEDBACK_CLK_DIV(x) ((x) << 8)
/* USB_PHY_PLL_CONTROL */
#define CLK_STABLE BIT(0)
#define PLL_CTRL_PIN BIT(1)
#define PLL_CTRL_REG BIT(2)
#define PLL_ON BIT(3)
#define PHASE_OFF_TOL_125 (0x0 << 5)
#define PHASE_OFF_TOL_250 BIT(5)
#define KVC0_CALIB (0x0 << 9)
#define KVC0_REG_CTRL BIT(9)
#define KVC0_HIGH (0x0 << 10)
#define KVC0_LOW (0x3 << 10)
#define CLK_BLK_EN BIT(13)
/* USB_PHY_TX_CTRL0 */
#define EXT_HS_RCAL_EN BIT(3)
#define EXT_FS_RCAL_EN BIT(4)
#define IMPCAL_VTH_DIV(x) ((x) << 5)
#define EXT_RS_RCAL_DIV(x) ((x) << 8)
#define EXT_FS_RCAL_DIV(x) ((x) << 12)
/* USB_PHY_TX_CTRL1 */
#define TX_VDD15_14 (0x0 << 4)
#define TX_VDD15_15 BIT(4)
#define TX_VDD15_16 (0x2 << 4)
#define TX_VDD15_17 (0x3 << 4)
#define TX_VDD12_VDD (0x0 << 6)
#define TX_VDD12_11 BIT(6)
#define TX_VDD12_12 (0x2 << 6)
#define TX_VDD12_13 (0x3 << 6)
#define LOW_VDD_EN BIT(8)
#define TX_OUT_AMP(x) ((x) << 9)
/* USB_PHY_TX_CTRL2 */
#define TX_CHAN_CTRL_REG(x) ((x) << 0)
#define DRV_SLEWRATE(x) ((x) << 4)
#define IMP_CAL_FS_HS_DLY_0 (0x0 << 6)
#define IMP_CAL_FS_HS_DLY_1 BIT(6)
#define IMP_CAL_FS_HS_DLY_2 (0x2 << 6)
#define IMP_CAL_FS_HS_DLY_3 (0x3 << 6)
#define FS_DRV_EN_MASK(x) ((x) << 8)
#define HS_DRV_EN_MASK(x) ((x) << 12)
/* USB_PHY_RX_CTRL */
#define PHASE_FREEZE_DLY_2_CL (0x0 << 0)
#define PHASE_FREEZE_DLY_4_CL BIT(0)
#define ACK_LENGTH_8_CL (0x0 << 2)
#define ACK_LENGTH_12_CL BIT(2)
#define ACK_LENGTH_16_CL (0x2 << 2)
#define ACK_LENGTH_20_CL (0x3 << 2)
#define SQ_LENGTH_3 (0x0 << 4)
#define SQ_LENGTH_6 BIT(4)
#define SQ_LENGTH_9 (0x2 << 4)
#define SQ_LENGTH_12 (0x3 << 4)
#define DISCON_THRESHOLD_260 (0x0 << 6)
#define DISCON_THRESHOLD_270 BIT(6)
#define DISCON_THRESHOLD_280 (0x2 << 6)
#define DISCON_THRESHOLD_290 (0x3 << 6)
#define SQ_THRESHOLD(x) ((x) << 8)
#define LPF_COEF(x) ((x) << 12)
#define INTPL_CUR_10 (0x0 << 14)
#define INTPL_CUR_20 BIT(14)
#define INTPL_CUR_30 (0x2 << 14)
#define INTPL_CUR_40 (0x3 << 14)
/* USB_PHY_ANALOG */
#define ANA_PWR_UP BIT(1)
#define ANA_PWR_DOWN BIT(2)
#define V2I_VCO_RATIO(x) ((x) << 7)
#define R_ROTATE_90 (0x0 << 10)
#define R_ROTATE_0 BIT(10)
#define MODE_TEST_EN BIT(11)
#define ANA_TEST_DC_CTRL(x) ((x) << 12)
static const u32 phy_berlin_pll_dividers[] = {
/* Berlin 2 */
CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
/* Berlin 2CD */
CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55),
};
struct phy_berlin_usb_priv {
void __iomem *base;
struct reset_control *rst_ctrl;
u32 pll_divider;
};
static int phy_berlin_usb_power_on(struct phy *phy)
{
struct phy_berlin_usb_priv *priv = phy_get_drvdata(phy);
reset_control_reset(priv->rst_ctrl);
writel(priv->pll_divider,
priv->base + USB_PHY_PLL);
writel(CLK_STABLE | PLL_CTRL_REG | PHASE_OFF_TOL_250 | KVC0_REG_CTRL |
CLK_BLK_EN, priv->base + USB_PHY_PLL_CONTROL);
writel(V2I_VCO_RATIO(0x5) | R_ROTATE_0 | ANA_TEST_DC_CTRL(0x5),
priv->base + USB_PHY_ANALOG);
writel(PHASE_FREEZE_DLY_4_CL | ACK_LENGTH_16_CL | SQ_LENGTH_12 |
DISCON_THRESHOLD_260 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) |
INTPL_CUR_30, priv->base + USB_PHY_RX_CTRL);
writel(TX_VDD12_13 | TX_OUT_AMP(0x3), priv->base + USB_PHY_TX_CTRL1);
writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
priv->base + USB_PHY_TX_CTRL0);
writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4) |
EXT_FS_RCAL_DIV(0x2), priv->base + USB_PHY_TX_CTRL0);
writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
priv->base + USB_PHY_TX_CTRL0);
writel(TX_CHAN_CTRL_REG(0xf) | DRV_SLEWRATE(0x3) | IMP_CAL_FS_HS_DLY_3 |
FS_DRV_EN_MASK(0xd), priv->base + USB_PHY_TX_CTRL2);
return 0;
}
static struct phy_ops phy_berlin_usb_ops = {
.power_on = phy_berlin_usb_power_on,
.owner = THIS_MODULE,
};
static const struct of_device_id phy_berlin_sata_of_match[] = {
{
.compatible = "marvell,berlin2-usb-phy",
.data = &phy_berlin_pll_dividers[0],
},
{
.compatible = "marvell,berlin2cd-usb-phy",
.data = &phy_berlin_pll_dividers[1],
},
{ },
};
MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);
static int phy_berlin_usb_probe(struct platform_device *pdev)
{
const struct of_device_id *match =
of_match_device(phy_berlin_sata_of_match, &pdev->dev);
struct phy_berlin_usb_priv *priv;
struct resource *res;
struct phy *phy;
struct phy_provider *phy_provider;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
priv->rst_ctrl = devm_reset_control_get(&pdev->dev, NULL);
if (IS_ERR(priv->rst_ctrl))
return PTR_ERR(priv->rst_ctrl);
priv->pll_divider = *((u32 *)match->data);
phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops);
if (IS_ERR(phy)) {
dev_err(&pdev->dev, "failed to create PHY\n");
return PTR_ERR(phy);
}
platform_set_drvdata(pdev, priv);
phy_set_drvdata(phy, priv);
phy_provider =
devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static struct platform_driver phy_berlin_usb_driver = {
.probe = phy_berlin_usb_probe,
.driver = {
.name = "phy-berlin-usb",
.owner = THIS_MODULE,
.of_match_table = phy_berlin_sata_of_match,
},
};
module_platform_driver(phy_berlin_usb_driver);
MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
MODULE_DESCRIPTION("Marvell Berlin PHY driver for USB");
MODULE_LICENSE("GPL");