linux/fs/Makefile
Richard Weinberger f74a14e870 um: Remove hppfs
hppfs (honeypot procfs) was an attempt to use UML as honeypot.
It was never stable nor in heavy use.

As Al Viro and Christoph Hellwig pointed some major issues out
it is better to let it die.

Signed-off-by: Richard Weinberger <richard@nod.at>
2015-05-31 13:23:08 +02:00

128 lines
4.1 KiB
Makefile

#
# Makefile for the Linux filesystems.
#
# 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
# Rewritten to use lists instead of if-statements.
#
obj-y := open.o read_write.o file_table.o super.o \
char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \
ioctl.o readdir.o select.o dcache.o inode.o \
attr.o bad_inode.o file.o filesystems.o namespace.o \
seq_file.o xattr.o libfs.o fs-writeback.o \
pnode.o splice.o sync.o utimes.o \
stack.o fs_struct.o statfs.o fs_pin.o nsfs.o
ifeq ($(CONFIG_BLOCK),y)
obj-y += buffer.o block_dev.o direct-io.o mpage.o
else
obj-y += no-block.o
endif
obj-$(CONFIG_PROC_FS) += proc_namespace.o
obj-y += notify/
obj-$(CONFIG_EPOLL) += eventpoll.o
obj-$(CONFIG_ANON_INODES) += anon_inodes.o
obj-$(CONFIG_SIGNALFD) += signalfd.o
obj-$(CONFIG_TIMERFD) += timerfd.o
obj-$(CONFIG_EVENTFD) += eventfd.o
obj-$(CONFIG_AIO) += aio.o
obj-$(CONFIG_FS_DAX) += dax.o
obj-$(CONFIG_FILE_LOCKING) += locks.o
obj-$(CONFIG_COMPAT) += compat.o compat_ioctl.o
obj-$(CONFIG_BINFMT_AOUT) += binfmt_aout.o
obj-$(CONFIG_BINFMT_EM86) += binfmt_em86.o
obj-$(CONFIG_BINFMT_MISC) += binfmt_misc.o
obj-$(CONFIG_BINFMT_SCRIPT) += binfmt_script.o
obj-$(CONFIG_BINFMT_ELF) += binfmt_elf.o
obj-$(CONFIG_COMPAT_BINFMT_ELF) += compat_binfmt_elf.o
obj-$(CONFIG_BINFMT_ELF_FDPIC) += binfmt_elf_fdpic.o
obj-$(CONFIG_BINFMT_FLAT) += binfmt_flat.o
obj-$(CONFIG_FS_MBCACHE) += mbcache.o
obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o
obj-$(CONFIG_NFS_COMMON) += nfs_common/
obj-$(CONFIG_COREDUMP) += coredump.o
obj-$(CONFIG_SYSCTL) += drop_caches.o
obj-$(CONFIG_FHANDLE) += fhandle.o
obj-y += quota/
obj-$(CONFIG_PROC_FS) += proc/
obj-$(CONFIG_KERNFS) += kernfs/
obj-$(CONFIG_SYSFS) += sysfs/
obj-$(CONFIG_CONFIGFS_FS) += configfs/
obj-y += devpts/
obj-$(CONFIG_PROFILING) += dcookies.o
obj-$(CONFIG_DLM) += dlm/
# Do not add any filesystems before this line
obj-$(CONFIG_FSCACHE) += fscache/
obj-$(CONFIG_REISERFS_FS) += reiserfs/
obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3
obj-$(CONFIG_EXT2_FS) += ext2/
# We place ext4 after ext2 so plain ext2 root fs's are mounted using ext2
# unless explicitly requested by rootfstype
obj-$(CONFIG_EXT4_FS) += ext4/
obj-$(CONFIG_JBD) += jbd/
obj-$(CONFIG_JBD2) += jbd2/
obj-$(CONFIG_CRAMFS) += cramfs/
obj-$(CONFIG_SQUASHFS) += squashfs/
obj-y += ramfs/
obj-$(CONFIG_HUGETLBFS) += hugetlbfs/
obj-$(CONFIG_CODA_FS) += coda/
obj-$(CONFIG_MINIX_FS) += minix/
obj-$(CONFIG_FAT_FS) += fat/
obj-$(CONFIG_BFS_FS) += bfs/
obj-$(CONFIG_ISO9660_FS) += isofs/
obj-$(CONFIG_HFSPLUS_FS) += hfsplus/ # Before hfs to find wrapped HFS+
obj-$(CONFIG_HFS_FS) += hfs/
obj-$(CONFIG_ECRYPT_FS) += ecryptfs/
obj-$(CONFIG_VXFS_FS) += freevxfs/
obj-$(CONFIG_NFS_FS) += nfs/
obj-$(CONFIG_EXPORTFS) += exportfs/
obj-$(CONFIG_NFSD) += nfsd/
obj-$(CONFIG_LOCKD) += lockd/
obj-$(CONFIG_NLS) += nls/
obj-$(CONFIG_SYSV_FS) += sysv/
obj-$(CONFIG_CIFS) += cifs/
obj-$(CONFIG_NCP_FS) += ncpfs/
obj-$(CONFIG_HPFS_FS) += hpfs/
obj-$(CONFIG_NTFS_FS) += ntfs/
obj-$(CONFIG_UFS_FS) += ufs/
obj-$(CONFIG_EFS_FS) += efs/
obj-$(CONFIG_JFFS2_FS) += jffs2/
obj-$(CONFIG_LOGFS) += logfs/
obj-$(CONFIG_UBIFS_FS) += ubifs/
obj-$(CONFIG_AFFS_FS) += affs/
obj-$(CONFIG_ROMFS_FS) += romfs/
obj-$(CONFIG_QNX4FS_FS) += qnx4/
obj-$(CONFIG_QNX6FS_FS) += qnx6/
obj-$(CONFIG_AUTOFS4_FS) += autofs4/
obj-$(CONFIG_ADFS_FS) += adfs/
obj-$(CONFIG_FUSE_FS) += fuse/
obj-$(CONFIG_OVERLAY_FS) += overlayfs/
obj-$(CONFIG_UDF_FS) += udf/
obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
obj-$(CONFIG_OMFS_FS) += omfs/
obj-$(CONFIG_JFS_FS) += jfs/
obj-$(CONFIG_XFS_FS) += xfs/
obj-$(CONFIG_9P_FS) += 9p/
obj-$(CONFIG_AFS_FS) += afs/
obj-$(CONFIG_NILFS2_FS) += nilfs2/
obj-$(CONFIG_BEFS_FS) += befs/
obj-$(CONFIG_HOSTFS) += hostfs/
obj-$(CONFIG_CACHEFILES) += cachefiles/
obj-$(CONFIG_DEBUG_FS) += debugfs/
obj-$(CONFIG_TRACING) += tracefs/
obj-$(CONFIG_OCFS2_FS) += ocfs2/
obj-$(CONFIG_BTRFS_FS) += btrfs/
obj-$(CONFIG_GFS2_FS) += gfs2/
obj-$(CONFIG_F2FS_FS) += f2fs/
obj-y += exofs/ # Multiple modules
obj-$(CONFIG_CEPH_FS) += ceph/
obj-$(CONFIG_PSTORE) += pstore/
obj-$(CONFIG_EFIVAR_FS) += efivarfs/