linux/drivers/phy/renesas/phy-rcar-gen3-usb3.c
Wolfram Sang eee0e5daa7 phy: renesas: use SPDX identifier for Renesas drivers
Use SPDX identifier for Renesas drivers.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-10 14:28:07 +05:30

224 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car Gen3 for USB3.0 PHY driver
*
* Copyright (C) 2017 Renesas Electronics Corporation
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#define USB30_CLKSET0 0x034
#define USB30_CLKSET1 0x036
#define USB30_SSC_SET 0x038
#define USB30_PHY_ENABLE 0x060
#define USB30_VBUS_EN 0x064
/* USB30_CLKSET0 */
#define CLKSET0_PRIVATE 0x05c0
#define CLKSET0_USB30_FSEL_USB_EXTAL 0x0002
/* USB30_CLKSET1 */
#define CLKSET1_USB30_PLL_MULTI_SHIFT 6
#define CLKSET1_USB30_PLL_MULTI_USB_EXTAL (0x64 << \
CLKSET1_USB30_PLL_MULTI_SHIFT)
#define CLKSET1_PHYRESET BIT(4) /* 1: reset */
#define CLKSET1_REF_CLKDIV BIT(3) /* 1: USB_EXTAL */
#define CLKSET1_PRIVATE_2_1 BIT(1) /* Write B'01 */
#define CLKSET1_REF_CLK_SEL BIT(0) /* 1: USB3S0_CLK_P */
/* USB30_SSC_SET */
#define SSC_SET_SSC_EN BIT(12)
#define SSC_SET_RANGE_SHIFT 9
#define SSC_SET_RANGE_4980 (0x0 << SSC_SET_RANGE_SHIFT)
#define SSC_SET_RANGE_4492 (0x1 << SSC_SET_RANGE_SHIFT)
#define SSC_SET_RANGE_4003 (0x2 << SSC_SET_RANGE_SHIFT)
/* USB30_PHY_ENABLE */
#define PHY_ENABLE_RESET_EN BIT(4)
/* USB30_VBUS_EN */
#define VBUS_EN_VBUS_EN BIT(1)
struct rcar_gen3_usb3 {
void __iomem *base;
struct phy *phy;
u32 ssc_range;
bool usb3s_clk;
bool usb_extal;
};
static void write_clkset1_for_usb_extal(struct rcar_gen3_usb3 *r, bool reset)
{
u16 val = CLKSET1_USB30_PLL_MULTI_USB_EXTAL |
CLKSET1_REF_CLKDIV | CLKSET1_PRIVATE_2_1;
if (reset)
val |= CLKSET1_PHYRESET;
writew(val, r->base + USB30_CLKSET1);
}
static void rcar_gen3_phy_usb3_enable_ssc(struct rcar_gen3_usb3 *r)
{
u16 val = SSC_SET_SSC_EN;
switch (r->ssc_range) {
case 4980:
val |= SSC_SET_RANGE_4980;
break;
case 4492:
val |= SSC_SET_RANGE_4492;
break;
case 4003:
val |= SSC_SET_RANGE_4003;
break;
default:
dev_err(&r->phy->dev, "%s: unsupported range (%x)\n", __func__,
r->ssc_range);
return;
}
writew(val, r->base + USB30_SSC_SET);
}
static void rcar_gen3_phy_usb3_select_usb_extal(struct rcar_gen3_usb3 *r)
{
write_clkset1_for_usb_extal(r, false);
if (r->ssc_range)
rcar_gen3_phy_usb3_enable_ssc(r);
writew(CLKSET0_PRIVATE | CLKSET0_USB30_FSEL_USB_EXTAL,
r->base + USB30_CLKSET0);
writew(PHY_ENABLE_RESET_EN, r->base + USB30_PHY_ENABLE);
write_clkset1_for_usb_extal(r, true);
usleep_range(10, 20);
write_clkset1_for_usb_extal(r, false);
}
static int rcar_gen3_phy_usb3_init(struct phy *p)
{
struct rcar_gen3_usb3 *r = phy_get_drvdata(p);
dev_vdbg(&r->phy->dev, "%s: enter (%d, %d, %d)\n", __func__,
r->usb3s_clk, r->usb_extal, r->ssc_range);
if (!r->usb3s_clk && r->usb_extal)
rcar_gen3_phy_usb3_select_usb_extal(r);
/* Enables VBUS detection anyway */
writew(VBUS_EN_VBUS_EN, r->base + USB30_VBUS_EN);
return 0;
}
static const struct phy_ops rcar_gen3_phy_usb3_ops = {
.init = rcar_gen3_phy_usb3_init,
.owner = THIS_MODULE,
};
static const struct of_device_id rcar_gen3_phy_usb3_match_table[] = {
{ .compatible = "renesas,rcar-gen3-usb3-phy" },
{ }
};
MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb3_match_table);
static int rcar_gen3_phy_usb3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rcar_gen3_usb3 *r;
struct phy_provider *provider;
struct resource *res;
int ret = 0;
struct clk *clk;
if (!dev->of_node) {
dev_err(dev, "This driver needs device tree\n");
return -EINVAL;
}
r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
if (!r)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
r->base = devm_ioremap_resource(dev, res);
if (IS_ERR(r->base))
return PTR_ERR(r->base);
clk = devm_clk_get(dev, "usb3s_clk");
if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
r->usb3s_clk = !!clk_get_rate(clk);
clk_disable_unprepare(clk);
}
clk = devm_clk_get(dev, "usb_extal");
if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
r->usb_extal = !!clk_get_rate(clk);
clk_disable_unprepare(clk);
}
if (!r->usb3s_clk && !r->usb_extal) {
dev_err(dev, "This driver needs usb3s_clk and/or usb_extal\n");
ret = -EINVAL;
goto error;
}
/*
* devm_phy_create() will call pm_runtime_enable(&phy->dev);
* And then, phy-core will manage runtime pm for this device.
*/
pm_runtime_enable(dev);
r->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb3_ops);
if (IS_ERR(r->phy)) {
dev_err(dev, "Failed to create USB3 PHY\n");
ret = PTR_ERR(r->phy);
goto error;
}
of_property_read_u32(dev->of_node, "renesas,ssc-range", &r->ssc_range);
platform_set_drvdata(pdev, r);
phy_set_drvdata(r->phy, r);
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(provider)) {
dev_err(dev, "Failed to register PHY provider\n");
ret = PTR_ERR(provider);
goto error;
}
return 0;
error:
pm_runtime_disable(dev);
return ret;
}
static int rcar_gen3_phy_usb3_remove(struct platform_device *pdev)
{
pm_runtime_disable(&pdev->dev);
return 0;
};
static struct platform_driver rcar_gen3_phy_usb3_driver = {
.driver = {
.name = "phy_rcar_gen3_usb3",
.of_match_table = rcar_gen3_phy_usb3_match_table,
},
.probe = rcar_gen3_phy_usb3_probe,
.remove = rcar_gen3_phy_usb3_remove,
};
module_platform_driver(rcar_gen3_phy_usb3_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 3.0 PHY");
MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");